Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Predicting the bond between concrete and reinforcing steel at elevated temperatures

  • Aslani, Farhad (Centre for Built Infrastructure Research, School of Civil and Environmental Engineering, University of Technology Sydney) ;
  • Samali, Bijan (Centre for Built Infrastructure Research, School of Civil and Environmental Engineering, University of Technology Sydney)
  • Received : 2013.04.20
  • Accepted : 2013.11.01
  • Published : 2013.12.10
⟨ Previous Next ⟩

Abstract

Reinforced concrete structures are vulnerable to high temperature conditions such as those during a fire. At elevated temperatures, the mechanical properties of concrete and reinforcing steel as well as the bond between steel rebar and concrete may significantly deteriorate. The changes in the bonding behavior may influence the flexibility or the moment capacity of the reinforced concrete structures. The bond strength degradation is required for structural design of fire safety and structural repair after fire. However, the investigation of bonding between rebar and concrete at elevated temperatures is quite difficult in practice. In this study, bond constitutive relationships are developed for normal and high-strength concrete (NSC and HSC) subjected to fire, with the intention of providing efficient modeling and to specify the fire-performance criteria for concrete structures exposed to fire. They are developed for the following purposes at high temperatures: normal and high compressive strength with different type of aggregates, bond strength with different types of embedment length and cooling regimes, bond strength versus to compressive strength with different types of embedment length, and bond stress-slip curve. The proposed relationships at elevated temperature are compared with experimental results.

Keywords

References

  1. Abrams, M.S. (1971), "Compressive strength of concrete at temperatures to $1600^{\circ}F$", Temperature and Concrete, Detroit (MI), American Concrete Institute, Special Publication, SP-25.
  2. ACI 318 (2008), "Building code requirements for structural concrete and commentary", American Concrete Institute.
  3. Ahmed, A.E., Al-Shaikh, A.H. and Arafat, T.I. (1992), "Residual compressive and bond strengths of limestone aggregate concrete subjected to elevated temperatures", Mag. Concrete Res., 44(159), 117-125. https://doi.org/10.1680/macr.1992.44.159.117
  4. Aslani, F. and Bastami, M. (2011), "Constitutive models and relationships for normal and high strength concrete at elevated temperatures", ACI Mater. J., 108(4), 355-364.
  5. Aslani, F. and Nejadi, S. (2012), "Bond behavior of reinforcement in conventional and self-compacting concrete", Adv. Struct. Eng., 15(12), 2033-2051. https://doi.org/10.1260/1369-4332.15.12.2033
  6. Aslani, F. and Samali, B. (2013a), "Constitutive relationships for steel fiber reinforced concrete at elevated temperatures", Fire Tech., doi: 10.1007/s10694-012-0322-5.
  7. Aslani, F. and Samali, B. (2013b), "High strength polypropylene fibre reinforcement concrete at high temperature", Fire Tech., doi: 10.1007/s10694-013-0332-y.
  8. Aslani, F. and Samali, B. (2013c), "Constitutive relationships for self-compacting concrete at elevated temperatures", Mater. Struct., doi: 10.1617/s11527-013-0187-1.
  9. Barbosa, M.T.G. (2001), "Evaluation of the behavior of the bond in ordinary and high strength concrete", Doctoral Thesis, COPPE/UFRJ. (in Portuguese)
  10. Bazant, Z.P. and Kaplan, M.F. (1996), "Concrete at high temperatures", Longman Group Limited.
  11. Bingöl, A.F. and Gül, R. (2009), "Residual bond strength between steel bars and concrete after elevated temperatures", Fire Saf. J., 44, 854-859 https://doi.org/10.1016/j.firesaf.2009.04.001
  12. Castillo, C. and Durrani, A.J. (1990). "Effect of transient high temperature on high strength concrete", ACI Mater. J., 87(1), 47-53.
  13. Carrasquillo, R., Nilson, A. and Slate, F. (1981), "Properties of high strength concrete subject to short-term loads", ACI J., 78(3), 171-178.
  14. CEB-FIP (1999), "Structural Concrete", Bulletin No. 1, Paris, France.
  15. CEB (1982), Bulletin D'Information No 151, "Bond action and bond behaviour of reinforcement (State-of-the- art report)", CEB, Paris, France, 153.
  16. Chang, Y.F., Chen, Y.H., Sheu, M.S. and Yao, G.C. (2006), "Residual stress-strain relationship for concrete after exposure to high temperatures", Cement Concrete Res., 36, 1999-2005. https://doi.org/10.1016/j.cemconres.2006.05.029
  17. Chou, L., Niwa, J. and Okamura, H. (1983), "Bond model for deformed bars embedded in massive concrete", Proceedings of 2nd JCI Colloquium on Shear Analysis of RC Structures, JCI, 45-52. (in Japanese)
  18. Diederichs, U. and Schneider, U. (1981), "Bond strength at high temperatures", Mag. Concrete Res., 33(115), 75-84. https://doi.org/10.1680/macr.1981.33.115.75
  19. Diederichs, U., Jumppanen, U.M. and Penttala, V. (1988), "Material properties of high strength concrete at elevated temperature", IABSE 13thCongress, Helsinki.
  20. Fib Bulletin 46 (2008), "Fire design of concrete structures - structural behaviour and assessment", State-of-Art Report, Chapter 6, Expertise and Assessment of Materials and Structures after Fire.
  21. Furumura, F., Abe, T. and Shinohara, Y. (1995), "Mechanical properties of high strength concrete at high temperatures", Proceedings of the Fourth Weimar Workshop on High Performance Concrete: Material Properties and Design, Hochschule fur Architekture and Bauwesen (Hab), Weimar, Germany.
  22. Haddad, R.H. and Shannis, L.G. (2004), "Post-fire behavior of bond between high strength pozzolanic concrete and reinforcing steel", Constr. Build. Mater., 18, 425-435. https://doi.org/10.1016/j.conbuildmat.2004.03.006
  23. Haddad, R.H., Al-Saleh, R.J. and Al-Akhras, N.M. (2008), "Effect of elevated temperature on bond between steel reinforcement and fiber reinforced concrete", Fire Saf. J., 43, 334-343. https://doi.org/10.1016/j.firesaf.2007.11.002
  24. Harajli, M.H., Hout, M. and Jalkh, W. (1995), "Local bond stress-slip behaviour of reinforcing bars em1bedded in plain and fibre concrete", ACI Mater. J., 92(4), 343-353.
  25. Hertz, K. (1982), "The anchorage capacity of reinforcing bars at normal and high temperatures", Mag. Concrete Res., 35(121), 213-220.
  26. Huang, Z., Engström, B. and Magnusson, J. (1996), "Experimental investigation of the bond and anchorage behaviour of deformed bars in high strength concrete", Report 94:4, Chalmers University of Technology.
  27. Kasami, H., Okuno, T. and Yamane, S. (1975), "Properties of concrete exposed to sustained elevated temperature", Transactions of the Third International Conference on Structural Mechanics in Reactor Technology, London, September.
  28. Milovanovf, A. and Salmanov, G.D. (1954), "The influence of high temperatures upon the properties of reinforcing steels and upon bond strength between reinforcement and concrete", Issledovanija po zharoupornym betonu i zhelezobetonu, 203-223. (in Russian)
  29. Malhotra, V.M. (1975), "Evaluation of the pullout test to determine strength in-situ concrete", RILEM Pub SARL, 8(43), 19-31.
  30. Morita, S. and Fujii, S. (1985), "Bond-slip models in finite element analysis", Proceeding of Japan-US Seminar on Finite Element Analysis of Reinforced Concrete Structures, Tokyo.
  31. Poon, C.S., Azhar, S., Anson, M. and Wong, Y.L. (2003), "Performance of Metakaolin concrete at elevated temperatures", Cement Concrete Compos., 25(1), 83-89. https://doi.org/10.1016/S0958-9465(01)00061-0
  32. Reichel, V. (1978), "How wire affects steel-to-concrete bond", Build. Res. Practice, 6(3), 176- 1Xh.
  33. Richards, O. (1977), "Pullout strength of concrete reproducibility and accuracy of mechanical tests", ASTM STP REP. No. 626, American Society for Testing and Materials, Philadelphia.
  34. Royles, R., Morley, P. and Khan, M.R. (1982), "The behavior of reinforced concrete at elevated temperatures with particular reference to bond strength", Ed. Bartos, P., Proceedings of Conference on Bond in Concrete, Paisley, Scotland.
  35. Royles, R. and Morley, P. (1983), "Response of the bond in reinforced concrete to high temperatures", Mag. Concrete Res., 35(123), 67-74. https://doi.org/10.1680/macr.1983.35.123.67
  36. Sancak, E., Sari, D. and Simsek, O. (2008), "Effects of elevated temperature on compressive strength and weight loss of the light-weight concrete with silica fume and super plasticizer", Cement Concrete Compos., 30(8), 715-721. https://doi.org/10.1016/j.cemconcomp.2008.01.004
  37. Savva, A., Manita, P. and Sideris, K.K. (2005), "Influence of elevated temperatures on the mechanical properties of blended cement concretes prepared with limestone and siliceous aggregates", Cement Concrete Compos., 27, 239-248. https://doi.org/10.1016/j.cemconcomp.2004.02.013
  38. Schneider, U. (1985), "Properties of materials at high temperatures - concrete", RILEM - Committee 44 - PHT, University of Kassel, Kassel.
  39. Skramtajew, B.G. (1983), "Determining concrete strength for control of concrete in structures", ACI J. Proc., 34(1), 205-304.
  40. Stone, W.C. and Giza, B.J. (1987), "The effect of geometry and aggregate on the reliability of the pullout test", Concrete Int., 7(2), 27-36.
  41. Stone, W.C. and Carino, N.J. (1983), "Deformation and failure in large-scale pullout tests", ACI J. Proc., 80(6), 501-513.
  42. Yamao, H., Chou, L. and Niwa, J. (1984), "Experimental study on bond stress-slip relationship", Proceedings of JSCE, No. 343, 219-228. (in Japanese)
  43. Yi, S.T., Yang, E.I. and Choi, J.Ch. (2006), "Effect of specimen sizes, specimen shapes, and placement directions on compressive strength of concrete", Nucl. Eng. Des., 235, 115-127.

Cited by

  1. Investigation of bond-slip modeling methods used in FE analysis of RC members vol.56, pp.2, 2015, https://doi.org/10.12989/sem.2015.56.2.275
  2. Analysis of a damaged industrial hall subjected to the effects of fire vol.58, pp.5, 2016, https://doi.org/10.12989/sem.2016.58.5.757
  3. Effect of temperature induced bond degradation on fire response of reinforced concrete beams vol.142, 2017, https://doi.org/10.1016/j.engstruct.2017.03.022
  4. Post-cooling properties of concrete exposed to fire vol.92, 2017, https://doi.org/10.1016/j.firesaf.2017.06.010
  5. Normal and High-Strength Lightweight Self-Compacting Concrete Incorporating Perlite, Scoria, and Polystyrene Aggregates at Elevated Temperatures vol.30, pp.12, 2018, https://doi.org/10.1061/(ASCE)MT.1943-5533.0002538
  6. Properties of High-Performance Self-Compacting Rubberized Concrete Exposed to High Temperatures vol.31, pp.5, 2019, https://doi.org/10.1061/(ASCE)MT.1943-5533.0002672
  7. Residual bond between concrete and reinforcing GFRP rebars at elevated temperatures vol.172, pp.2, 2019, https://doi.org/10.1680/jstbu.17.00126
  8. Condition assessment of fire affected reinforced concrete shear wall building - A case study vol.4, pp.2, 2016, https://doi.org/10.12989/acc.2016.4.2.089
  9. Assessment and restoration of bond strength of heat-damaged reinforced concrete elements vol.169, pp.None, 2013, https://doi.org/10.1016/j.conbuildmat.2018.03.008
  10. Assessment of damages on a RC building after a big fire vol.6, pp.2, 2013, https://doi.org/10.12989/acc.2018.6.2.177
  11. Size effect on strength of Fiber-Reinforced Self-Compacting Concrete (SCC) after exposure to high temperatures vol.21, pp.6, 2013, https://doi.org/10.12989/cac.2018.21.6.681
  12. Evolution of the bond strength between reinforcing steel and fibre reinforced concrete after high temperature exposure vol.176, pp.None, 2013, https://doi.org/10.1016/j.conbuildmat.2018.05.065
  13. Properties of Ambient-Cured Normal and Heavyweight Geopolymer Concrete Exposed to High Temperatures vol.12, pp.5, 2013, https://doi.org/10.3390/ma12050740
  14. Fire Performance of Heavyweight Self-Compacting Concrete and Heavyweight High Strength Concrete vol.12, pp.5, 2013, https://doi.org/10.3390/ma12050822
  15. Evaluation of Properties and Microstructure of Cement Paste Blended with Metakaolin Subjected to High Temperatures vol.12, pp.6, 2013, https://doi.org/10.3390/ma12060941
  16. Fiber‐reinforced lightweight self‐compacting concrete incorporating scoria aggregates at elevated temperatures vol.20, pp.3, 2019, https://doi.org/10.1002/suco.201800231
  17. Mechanical Behavior of Fiber-Reinforced Self-Compacting Rubberized Concrete Exposed to Elevated Temperatures vol.31, pp.12, 2013, https://doi.org/10.1061/(asce)mt.1943-5533.0002942
  18. Performance of concrete containing recycled springs in post-fire conditions vol.173, pp.1, 2013, https://doi.org/10.1680/jstbu.18.00042
  19. Factors Influencing Bond Properties in Concrete Encased Steel Columns at High Temperatures vol.20, pp.3, 2013, https://doi.org/10.1007/s13296-020-00341-5
  20. Prediction of mechanical properties of limestone concrete after high temperature exposure with artificial neural networks vol.10, pp.3, 2013, https://doi.org/10.12989/acc.2020.10.3.247
  21. An experimental study to evaluate the POSTFIRE mechanical properties of concrete specimens vol.21, pp.6, 2013, https://doi.org/10.1002/suco.202000011
  22. Effect of elevated temperatures on the shear-friction behaviour of concrete: Experimental and analytical study vol.225, pp.None, 2020, https://doi.org/10.1016/j.engstruct.2020.111305
  23. Modeling Uniaxial Bond Stress-Slip Behavior of Reinforcing Bars Embedded in Concrete with Different Strengths vol.14, pp.4, 2021, https://doi.org/10.3390/ma14040783
  24. Experimental Study on the Effect of Basalt Fiber and Sodium Alginate in Polymer Concrete Exposed to Elevated Temperature vol.9, pp.3, 2021, https://doi.org/10.3390/pr9030510
  25. Bond performance of grouted tendons at elevated temperatures vol.174, pp.9, 2013, https://doi.org/10.1680/jstbu.20.00090