Earthquakes and Structures

  • 제5권5호
  • /
  • Pages.553-570
  • /
  • 2013
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Contribution of non-structural brick walls distributions on structures seismic responses

  • Farghaly, Ahmed Abdelraheem (Civil and Architecture Building Department, Faculty of Industrial Education, Sohag University) ;
  • Rahim, Hamdy H.A. Abdel (Civil Engineering Department, Faculty of Engineering, Assiut University)
  • 투고 : 2013.01.10
  • 심사 : 2013.07.26
  • 발행 : 2013.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

Using of masonry infill as partitions, in flat slab frame buildings is a common practice in many parts of the world. The infill is, generally, not considered in the design and the buildings are designed as bare frames. More of fundamental information in the effect of masomary infill on the seismic performance of RC building frames is in great demand for structural engineers. Therefore the main aim of this research is to evaluate the seismic performance of such buildings without (bare frame) and with various systems of the masonary infill. For this purpose, thirteen three dimensional models are chosen and analyzed by SAP2000 program. In this study the stress strain relation model proposed by Crisafulli for the hysteric behaviour of masonary subjected to cyclic loading is used. The results show that the nonstructural masonary infill can impart significant increase global strength and stiffness of such building frames and can enhance the seismic behaviour of flat slab frame building to large extent depending on infill wall system. As a result great deal of insight has been obtained on seismic response of such flat slab buildings which enable the structural engineer to determine the optimum position of infill wall between the columns.

키워드

참고문헌

  1. Amrhein, J.E., Anderson, J.C. and Robles, V.M. (1985), "Masonry saves lives in Mexico earthquake", Masonry Design West.
  2. Angel, R.E. (1994), "Behavior of reinforced concrete frames with masonry infill walls", University Illinois at Urbana-Champaingn, Illinois.
  3. Bashandy, T., Rubiano, N.R. and Klingner, R.E. (1995), "Evaluation and analytical verification of infilled frame test data", Department of Civil Engineering, University of Texas, Austin, Texas.
  4. Brzev, S. (2007), "Earthquake-resistant confined masonry construction", NICEE, ITTK, Indian, report.
  5. Crisafulli, F. (1997), "Seismic behaviour of reinforced structures with reinforced masonry infiills", Ph.D. thesis, University of Canterbury, New Zeland.
  6. FEMA-306 FEMA306 (1998), Evaluation of earthquake damaged concrete and masonry wall buildings.
  7. FEMA 356 ( 2000), Guidelines for seismic rehabilitation of buildings, ASCE, Reston VA.
  8. Flanagan, R.D. and Bennett, R.M. (1999), "Bidirectional behaviour of structural clay tile infilld frames", J. Struct. Eng.-ASCE, 125(3), 236-244. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:3(236)
  9. Griffith, M.C., Vaculik, J., Lam, N.T.K., Wilson, J. and Lumantarna, L. (2007), "Cyclic testing of unreinforced masonry walls in two-way bending", Earthq. Eng. Struct. D., 36(6), 801-821. https://doi.org/10.1002/eqe.654
  10. Harpal, Singh, Paul, D.K. and Sastry, V.V. (1998), "Inelastic dynamic response of reinforced concrete infilled frames", Comput. Struct., 69, 685-693. https://doi.org/10.1016/S0045-7949(98)00124-2
  11. Hemant, B.K., Durgesh, C.R. and Sudhir, K.J. (2006), "Code spproaches to deismic design of masonry-infilld reinforced concrete frames: a state-of-the-art review", Earthq. Spectra, 22(4), 961-983. https://doi.org/10.1193/1.2360907
  12. Hong, Hao, Guo-Wei, M. and Yong, L. (2002), "Damage assessment of masonry infilld RC frames subjected to blasting induced ground excitations", Eng. Struct., 24(6), 671-838. https://doi.org/10.1016/S0141-0296(01)00130-4
  13. Lam, N.T.K., Griffith, M., Wilson, J. and Doherty, K. (2003), "Time-history analysis of URM walls in out-of-plane flexure", Eng. Struct., 25(6), 743-754. https://doi.org/10.1016/S0141-0296(02)00218-3
  14. Lourenco, P. B. (1996), Computational strategies for masonry structures, Delf University Press.
  15. Mander, J.B., Nair, B., Wojtkowski, K. and Ma, J. (1993), "An experimental study on the seismic performance of brick-infilld steel frames with and without retrofit", National Center for Earthquake
  16. Engineering Research, State University of New York, Buffalo, New York. Nollet, M.J., Smith, B.S. (1998), "Stiffened-Story Wall-Frame Tall Building Structure", Comput. Struct., 66(2-3), 225-240. https://doi.org/10.1016/S0045-7949(97)00064-3
  17. Paulay, T. and Priestley, M.J.N. (1992), Seismic design of reinforced concrete and masonry buildings, John Wiley.
  18. Pujol, S.A and Fick, D.B. (2010), "The test of a full-scale three-story RC structure with masonry infill walls", Eng. Struct., 32, 3112-3121. https://doi.org/10.1016/j.engstruct.2010.05.030
  19. Sahota, M.K. and Riddington, J.R. (2001), "Experimental investigation into using lead to reduce vertical load transfer in infilld frames", Eng. Struct., 23, 94-101. https://doi.org/10.1016/S0141-0296(00)00025-0
  20. Shing, P.B. and Mehrabi, A.B. (2002, "Behaviour and analysis of masonry-infilld frames", Prog. Struct. Eng. Mater., 4(3), 320-331. https://doi.org/10.1002/pse.122

피인용 문헌

  1. Investigation on seismic isolation retrofit of a historical masonry structure vol.16, pp.4, 2013, https://doi.org/10.12989/eas.2019.16.4.501