참고문헌
- Afgan, I., Moulinec, C., Prosser, R. and Laurence, D. (2007), "Large eddy simulation of turbulent flow for wall-mounted cantilever cylinders of aspect ratio 6 and 10", Int. J. Heat Fluid Fl., 28(4), 561-574. https://doi.org/10.1016/j.ijheatfluidflow.2007.04.014
- Dobriloff, C. and Nitsche, W. (2009), Surface pressure and wall shear stress measurements on a wall mounted cylinder, Imaging Measurement Method., NNFM 106.
- Farivar, D. (1981), "Turbulent uniform flow around cylinders of finite length", AIAA J., 19(3), 275-281. https://doi.org/10.2514/3.7771
- Fox, T.A., Apelt, C.J. and West, G.S. (1993), "The aerodynamics disturbance caused by the free-ends of a circular cylinder immersed in a uniform flow", J. Wind Eng. Ind. Aerod., 49(1-3), 389-400. https://doi.org/10.1016/0167-6105(93)90033-K
- Frederich, O., Wassen, E. and Thiele, F. (2008), "Prediction of the flow around a short wall-mounted finite cylinder using LES and DES", J. Numer. Anal.Ind. Appl. Math., 3(3-4), 231-247.
- Frohlich, J. and Rodi, W. (2004), "LES of the flow around a circular cylinder of finite height", Int. J. Heat Fluid Fl., 25(3), 537-548. https://doi.org/10.1016/j.ijheatfluidflow.2004.02.006
- Hain, R., Kohler, C.J. and Michaelis, D. (2008), "Tomographic and time resolved PIV measurements on a finite cylinder mounted on a flat plate", Exp. Fluids, 45(4), 715-724. https://doi.org/10.1007/s00348-008-0553-x
- Holman, J.P. (1994), Experimental methods for engineers, McGraw-Hill Book Company, NewYork.
- Karem, A. and Lu, P.C. (1992), "Pressure fluctuations on flat roofs with parapets", J. Wind Eng. Ind. Aerod., 41-44, 1775-1786.
- Kareem, A. and Cheng, C.M. (1999), "Pressure and force fluctuations on isolated roughened circular cylinders of finite length in boundary layer flows", J. Fluid. Struct., 13(7-8), 907-933. https://doi.org/10.1006/jfls.1999.0247
- Kawamura, T., Hiwada, M., Hibino, T., Mabuchi, I. and Kamuda, M. (1984), "Flow around a finite circular cylinder on a flat plate", Bull. JSME, 27(232), 2142-2151. https://doi.org/10.1299/jsme1958.27.2142
- Kitagawa, T., Fujino, Y., Kimura, K. and Mizuno, Y. (2002), "Wind pressures measurement on end-cell-induced vibration of a cantilevered circular cylinder", J. Wind Eng. Ind. Aerod., 90(4-5), 395-405. https://doi.org/10.1016/S0167-6105(01)00200-8
- Kopp, G.A., Mans, C. and Surry, D. (2005), "Wind effects of parapets on low buildings: part 2. structural loads", J. Wind Eng. Ind. Aerod., 93(11), 843-855. https://doi.org/10.1016/j.jweia.2005.08.005
- Krajnovic, S. (2011), "Flow around a tall finite cylinder explored by large eddy simulation", J. Fluid Mech., 676, 294-317. https://doi.org/10.1017/S0022112011000450
- Li, Y.Q., Tamura, Y., Yoshida, A., Katsumura, A. and Cho, K. (2006), "Wind loading and its effects on single-layer reticulated cylindrical shells", J. Wind Eng. Ind. Aerod., 94(12), 949-973. https://doi.org/10.1016/j.jweia.2006.04.004
- Mans, C., Kopp, G.A. and Surry, D. (2005), "Wind effects of parapets on low buildings: part 3. Parapet loads", J. Wind Eng. Ind. Aerod., 93(11),857-872. https://doi.org/10.1016/j.jweia.2005.08.007
- Okamoto, T. and Yagita, M. (1973), "The experimental investigation on the flow past a circular cylinder of finite length placed normal to the plane surface in a uniform stream", Bull. JSME, 16(95), 805-814. https://doi.org/10.1299/jsme1958.16.805
- Okamoto, S. and Sunabashiri, Y. (1992), "Vortex shedding from a circular cylinder of finite length placed on a ground plane", J. Fluid.Eng. - T ASME, 114(4), 512-521. https://doi.org/10.1115/1.2910062
- Park, C.W. and Lee, S.J. (2002), "Flow structure around a finite circular cylinder embedded in various atmospheric boundary layers", Fluid Dyn. Res., 30(4), 197-215. https://doi.org/10.1016/S0169-5983(02)00037-0
- Park, C.W. and Lee, S.J. (2003), "Flow structure around two finite circular cylinders located in an atmospheric boundary layer: side-by-side arrangement", J. Fluid. Struct., 17(8), 1043-1058. https://doi.org/10.1016/S0889-9746(03)00070-7
- Pattenden, R.J., Turnock, S.R. and Zhang, X. (2005), "Measurements of the flow over a low-aspect-ratio cylinder mounted on a ground plane", Exp. Fluids, 39(1), 10-21. https://doi.org/10.1007/s00348-005-0949-9
- Portela, G. and Godoy, L.A. (2005), "Wind pressures and buckling of cylindrical steel tanks with a dome roof", J. Constr. Steel Res., 61(6), 808-824. https://doi.org/10.1016/j.jcsr.2004.11.001
- Purdy, D.M., Maher, P.E. and Frederick, D. (1967), "Model studies of wind loads on flat-top cylinders", J. Struct. Division - ASCE, 93, 379-395.
- Roh, S.C. and Park, S.O. (2003), "Vortical flow over the free end surface of a finite circular cylinder mounted on a flat plate", Exp. Fluids, 34(1), 63-67. https://doi.org/10.1007/s00348-002-0532-6
- Shih, W.C.L., Wang, C. and Coles, D. (1993), "Experiments on flow past rough circular cylinders at large Reynolds numbers", J. Wind Eng. Ind. Aerod., 49 (1-3), 351-368. https://doi.org/10.1016/0167-6105(93)90030-R
- Stathopoulos, T. (1982), "Wind pressures on low buildings with parapets", J. Struct. Division - ASCE, 108(12), 2723-2736.
- Stathopoulos, T. and Baskaran, A. (1988), "Wind pressures on flat roofs with parapets", J. Struct. Eng. - ASCE, 113(11), 2166-2180.
- Sumner, D., Heseltine, J.L. and Dansereau, O.J.P. (2004) "Wake structure of a finite circular cylinder of small aspect ratio", Exp. Fluids, 37(5), 720-730. https://doi.org/10.1007/s00348-004-0862-7
- Sumner, D. and Heseltine, J.L. (2008), "Tip vortex structure for a circular cylinder with a free end", J. Wind Eng. Ind. Aerod., 96(6-7), 1185-1196. https://doi.org/10.1016/j.jweia.2007.06.039
- Sun, T.F., Gu, Z.F., He, D.X. and Zhang, L.L. (1992), "Fluctuating pressure on two circular cylinders at high Reynolds numbers", J. Wind Eng. Ind. Aerod., 41-44, 577-588.
- Uematsu, Y., Yamada, M. and Ishii, K. (1990), "Some effects of free-stream turbulence on the flow past a cantilevered circular cylinder", J. Wind Eng. Ind. Aerod., 33(1-2), 43-52. https://doi.org/10.1016/0167-6105(90)90019-9
- Uematsu, Y. and Yamada, M. (1994), "Aerodnamic forces on circular cylinders of finite height", J. Wind Eng. Ind. Aerod., 51(2), 249-265. https://doi.org/10.1016/0167-6105(94)90007-8
- Uematsu, Y. and Yamada, M. (2002). "Wind-induced dynamic response and its load estimation for structural frames of circular flat roofs with long span", Wind Struct., 5(1), 49-60. https://doi.org/10.12989/was.2002.5.1.049
- Uematsu, Y., Watanabe, K., Sasaki, A., Yamada, M. and Hongo, T. (1999), "Wind-induced dynamic response and resultant load estimation of a circular flat roof", J. Wind Eng. Ind. Aerod., 83(1-3), 251-261. https://doi.org/10.1016/S0167-6105(99)00076-8
- Uematsu, Y., Moteki, T. and Hongo, T. (2008), "Model of wind pressure field on circular flat roofs and its application to load estimation", J. Wind Eng. Ind. Aerod., 96(6-7), 1003-1014. https://doi.org/10.1016/j.jweia.2007.06.025
- West, G.S. and Apelt, C.J. (1982), "The effects of tunnel blockage and aspect ratio on the mean flow past a circular cylinder with Reynolds numbers between 10(4) and 10(5)", J. Fluid Mech., 114, 361-377. https://doi.org/10.1017/S0022112082000202
피인용 문헌
- Enhancing aerodynamic performance of NACA 4412 aircraft wing using leading edge modification vol.29, pp.4, 2019, https://doi.org/10.12989/was.2019.29.4.271
- Aerodynamic design optimization of an aircraft wing for drag reduction using computational fluid dynamics approach vol.31, pp.1, 2020, https://doi.org/10.12989/was.2020.31.1.15