DOI QR코드

DOI QR Code

Recovery of Lithium and Leaching Behavior of NCM Powder by Carbon Reductive Treatment from Li(NCM)O2 System Secondary Battery Scraps

Li(NCM)O2계(係) 이차전지(二次電池) 공정(工程)스크랩의 탄소환원처리(炭素還元處理)에 의한 리튬회수(回收) 및 NCM 분말(粉末)의 침출거동(浸出擧動)

  • Received : 2013.03.25
  • Accepted : 2013.06.04
  • Published : 2013.08.30

Abstract

A study on the recovery of lithium and leaching behavior of NCM powder by carbon reduction for NCM-system Li-ion battery scraps was conducted. First of all, the oxide powders of NCM-system with layer structure were decomposed by carbon, lithium was converted to lithium carbonate by carbon reaction at above $600^{\circ}C$. The lithium carbonate powders with 99% purity were manufactured by washing method with water and concentration process for NCM powder after carbon reduction. The reaction yield was approximately 88% at $800^{\circ}C$ by carbon reduction. At this time, leaching efficiency at 2M sulfuric acid concentration was over 99% for cobalt, nickel and manganese.

$Li(NCM)O_2$계 폐리튬전지 공정 스크랩의 재활용 연구의 일환으로서 리튬화합물의 회수와 NCM전구체를 제조하기 위한 침출거동에 대하여 살펴보았다. 우선 탄소를 이용하여 층상 구조의 NCM계 산화물 분말을 분해시켰으며, $600^{\circ}C$ 이상의 탄소반응으로 리튬은 탄산리튬으로 변화시켰다. 탄산리튬은 수세 후 농축과정을 거쳐 순도 99% 이상의 탄산리튬 분말로 회수하였다. 그리고 탄소에 의한 환원 반응율은 $800^{\circ}C$에서 약 88%을 나타내었으며, 탄소환원 처리 후 분말에 대한 황산 침출 결과, 2M 이상의 황산농도에서 코발트, 니켈, 망간의 침출율은 99% 이상이었다.

Keywords

References

  1. H. C. Jung et al., 2010: Overview and future concerns for lithium-ion batteries materials, J. Korean Powder Metallurgy Institute, 17(3) pp. 175-189. https://doi.org/10.4150/KPMI.2010.17.3.175
  2. H. K. Park, 2008: The research and development trend of cathode materials in lithium ion battery, J. Korean Electrochem. Soc., 11(3), pp. 197-210. https://doi.org/10.5229/JKES.2008.11.3.197
  3. H. S. Hong et al., 2011: Overview and Prospects for cathode materials of lithium secondary batteries, Trend in Metals & Materials Engineering, 24(1), pp. 26-32.
  4. G. C. Shim, 2011: A state of art review on lithium-ion batteries for vehicular applications, Trend in Metals & Materials Engineering, 24(6), pp. 49-64.
  5. P. Zhang et al., 1998: Hydrometallurgical process for recovery of metal values from spent lithium-ion secondary batteries, Hydrometallurgy, 47, pp. 259-271. https://doi.org/10.1016/S0304-386X(97)00050-9
  6. M. Contestabile et al., 2001: A laboratory-scale lithium-ion battery recycling process, J. of Power Sources, 92, pp. 65-69. https://doi.org/10.1016/S0378-7753(00)00523-1
  7. C. K. Lee and N. H. Kim, 2001: Reductive leaching of $LiCoO_2$ in a sulfuric acid solution, J. Korean Inst. of Resources Recycling, 10(6), pp. 9-14.
  8. S. Castillo et al., 2002: Advances in the recovering of spent lithium battery compounds, J. of Power Sources, 112, pp. 247-254. https://doi.org/10.1016/S0378-7753(02)00361-0
  9. J. Nan et al., 2005: Recovery of metal values from spent lithium-ion batteries with chemical deposition and solvent extraction, J. of Power Sources, 152, pp. 278-284. https://doi.org/10.1016/j.jpowsour.2005.03.134
  10. R. Wang et al., 2009: A novel recovery process of metal values from the cathode active materials of the lithium-ion secondary batteries, Hydrometallurgy, 99, pp. 194-201. https://doi.org/10.1016/j.hydromet.2009.08.005
  11. C. Liang et al., 2011: Separation and recovery of Ni, Co, Mn from spent lithium-ion batteries, The Chinese J. of Nonferrous Metals., 21(5), pp. 1192-1198.
  12. S. K. Kim et al., 2011: The high efficient physical and chemical treatment of spent lithium ion battery module of electric vehicle for recovery of valuable metals, The 2011 spring meeting and 36th conference, Korean Inst. of Resources Recycling, pp. 84-89.
  13. D. W. Kim et al., 2011: Recovery of lithium and leaching behavior of NCM powder by reductive treatment from NCM-system Li-ion battery scraps, Digests of the 2012 fall meeting and 39th conference, Korean Inst. of Resources Recycling, pp. 233-240.
  14. C. K. Lee and D. H. Yang, 2001: Recovery of valuable metals from spent lithium ion batteries, J. Korean Ind. Eng. Chem., 12(8), pp. 890-895.
  15. R. Kononov, 2008: Carbothermal solid state reduction of manganese oxide and ores in different gas atmospheres, Ph. D. thesis, The University of New South Wales.