DOI QR코드

DOI QR Code

Mechanical performance and design optimization of rib-stiffened super-wide bridge deck with twin box girders in concrete

  • Wen, Xiong (Department of Bridge Engineering, School of Transportation, Southeast University) ;
  • Ye, Jianshu (Department of Bridge Engineering, School of Transportation, Southeast University) ;
  • Gai, Xuemei (Department of Bridge Engineering, School of Transportation, Southeast University) ;
  • Cai, C.S. (Department of Civil and Environmental Engineering, Louisiana State University)
  • 투고 : 2013.05.17
  • 심사 : 2013.10.26
  • 발행 : 2013.11.10

초록

The present study fundamentally investigated the mechanical performance of the rib-stiffened super-wide bridge deck with twin box girders in concrete, which is a very popular application to efficiently widen the bridges with normal span. The shear lag effects of the specific cross-sections were firstly studied. The spatial stress distribution and local stiffness of the bridge deck with twin box girders were then investigated under several typical wheel load conditions. Meanwhile, a comparative study for the bridge deck with and without stiffening ribs was also carried out during the investigation; thereby, a design optimization for the stiffening ribs was further suggested. Finally, aiming at the preliminary design, an approximate methodology to manually calculate the bending moments of the rib-stiffened bridge deck was analytically proposed for engineers to quickly assess its performance. This rib-stiffened bridge deck with twin box girders can be widely applied for concrete (especially concrete cable-stayed) bridges with normal span, however, requiring a super-wide bridge width due to the traffic flow.

키워드

참고문헌

  1. Ogawa, K., Shimodoi, H. and Oryu, T. (2002), "Aerodynamic characteristics of a 2-boxgirder section adaptable for a super-long span suspension bridge", Journal of Wind Engineering and Industrial Aerodynamics, 90(12-15), 2033-2043. https://doi.org/10.1016/S0167-6105(02)00319-7
  2. Kim, H.H. and Shim, C.S. (2009), "Experimental investigation of double composite twin-girder railway bridges", Journal of Constructional Steel Research, 65(6), 1355-1365. https://doi.org/10.1016/j.jcsr.2009.02.004
  3. Larsena, A., Savageb, M., Lafreniereb, A., Hui, M.C.H. and Larsen, S.Y. (2007), "Investigation of vortex response of a twinbox bridge section at high and low Reynolds numbers", Journal of Wind Engineering and Industrial Aerodynamics, 96(6-7), 934-944.
  4. Xiong, W, Xiao, R. C., Deng, L. and Cai, C.S. (2010), "Methodology of long-term real-time condition assessment for existing cable-stayed bridges", Advances in Structural Engineering, 13(1), 111-125. https://doi.org/10.1260/1369-4332.13.1.111
  5. Razagpur, A.G. and Li, H.G (1991), "A finite element with exact shape functions for shear lag analysis in multi-cell box girders", Computers and Structures, 39(1-2),155-163. https://doi.org/10.1016/0045-7949(91)90083-X
  6. Ito, M. (1996), "Cable-supported steel bridges: design problems and solutions", Journal of Constructional Steel Research, 39(1), 69-84. https://doi.org/10.1016/0143-974X(96)00026-0
  7. Simoes, L.M.C. and Negrao, J.H.J.O. (2000), "Optimization of cable-stayed bridges with box-girder decks", Advances in Engineering Software, 31(6), 417-423. https://doi.org/10.1016/S0965-9978(00)00003-X
  8. Klowak, C.S. and Mufti, A.A. (2009), "Behaviour of bridge deck cantilever overhangs subjected to a static and fatigue concentrated load", Construction and Building Materials, 23(4),1653-1664. https://doi.org/10.1016/j.conbuildmat.2008.10.016
  9. Luo, Q.Z., Wu, Y.M., Li, Q.S., Tang, J., and Liu, G.D. (2004), "A finite segment model for shear lag analysis", Engineering Structures, 26(14), 2113-2124. https://doi.org/10.1016/j.engstruct.2004.07.010
  10. Freitas, S.T.D., Kolstein, H. and Bijlaard, F. (2010), "Composite bonded systems for renovations of orthotropic steel bridge decks", Composite Structures, 92(4), 853-862. https://doi.org/10.1016/j.compstruct.2009.09.016
  11. Medani, T.O. (2006), "Design principles of surfacings on orthotropic steel bridge decks", PhD Thesis, Delft University of Technology, Delft, The Netherlands.
  12. Overduin, L., Romeijn, A. and Kolstein, M.H. (1999), "Modelling of bridge deck systems for orthotropic steel bridges", Proceedings National Conference on ComputationalMmechanics, VoIos, Greece.
  13. Vincent, Rand Ferro, A. (2004), "A new orthotropic bridge deck: design, fabrication and construction of the shenley bridge incorporating an SPS orthotropic bridge deck", 2004 International Orthotropic Bridge Conference, Sacramento, California, USA
  14. Pfeil, M.S., Battista, R.C. and Mergulhao, A.J.R. (2005), "Stress concentration in steelbridge orthotropic decks", Journal of Constructional Steel Research, 61(8), 1172-1184. https://doi.org/10.1016/j.jcsr.2005.02.006
  15. Gimsing, N.J. (1997), Cable-Supported bridges, 2nd edition, John Wiley & Sons, New York, USA
  16. AASHTO LRFD Bridge Design Specifications (2004), Association of state highway and transportation officials, Washington, DC, U.S.A.
  17. Xiong, W,, Cai, C.S., Zhang, Y. and Xiao, R.C. (2011), "Study of super long span cable-stayed bridges with CFRP components", Engineering Structures, 33(2), 330-343. https://doi.org/10.1016/j.engstruct.2010.10.013
  18. JTG D60-2004 (2004), "General Code for Design of Highway Bridges and Culverts", China Communications Press, Beijing, China.
  19. JTG D62-2004 (2004), "Code for Design of Highway Reinforced Concrete and Prestressed Concrete Bridges and Culverts", China Communications Press, Beijing, China.

피인용 문헌

  1. Hybrid element-based virtual distortion method for finite element model updating of bridges with wide-box girders vol.143, 2017, https://doi.org/10.1016/j.engstruct.2017.04.030
  2. Static Experiment on Mechanical Behavior of Innovative Flat Steel Plate-Concrete Composite Slabs vol.18, pp.2, 2018, https://doi.org/10.1007/s13296-018-0012-3