참고문헌
- Barton, N. R, and Choubey, V., 1977, The shear strength of rock joints in theory and practice, Rock Mechanics, Vol. 10, pp. 1-54. https://doi.org/10.1007/BF01261801
- Cho, T. C., and Suk, J. W., 2013, A study on the effect of normal stress on the joint shear behavior, Journal of Korean society for Rock Mechanics, Vol. 23, No. 3, pp. 203-211. https://doi.org/10.7474/TUS.2013.23.3.203
- Deere, D. U., Hendron, A. J. Patton, F. D. and Cording, E. J., 1966, Design of surface and near-surface construction in rock, Proc. 8th U.S. Rock Mech. Symp., pp. 233-243.
- Grasselli, G. and Egger, P., 2003, Constitutive law for the shear strength of rock joints based on three-dimensional surface parameters, Int. J. Rock Mech. Min. Sci., Vol. 40, No. 1, pp.25-40. https://doi.org/10.1016/S1365-1609(02)00101-6
- Haberfield, C. M. and Johnston I. W., 1994, A mechanistically-based model for rough rock joints, Int. J. Rock Mech. Min. Sci & Geomech., Vol31, No.4, pp. 279-292 https://doi.org/10.1016/0148-9062(94)90898-2
- Hong. E. S., 2005, Characterization of Rock Joint Roughness Based on Roughness Mobilization Characteristics, A doctoral dissertation, Korea univ.
- Huang, T. H., and Doong, Y. S., 1990, Anisotropic shear strength of rock joints, Proc. the Int. Symp. on Rock Joints, Leon, Norway, pp.211-218.
- Kim, D. Y., 2001, Roughness effects on the shear behavior of rock joints, A doctoral dissertation, HanYang Univ.
- Kulatilake, P., Shou, G., Huang, T. and Morgan, R., 1995, New peak shear strength criteria for anisotripic rock joints. Int. J. Rock Mech. Min. Sci & Geomech., Vol. 33, pp. 673-697.
- Lee, M. H., Kim, J. W. and Chang, K. T., 2007, The influence of rock joint roughness and normal stress on shear behavior, Journal of Korean Society for Rock Mechanics, Vol. 17, No.3, pp. 186-196.
- Maerz N. H., Franklin J. A. and Bennett C. P., 1990, Joint roughness measurement using shadow profilometry, Int. J. Rock. Mech. Min. Sci. & Geomech. Abstr. Vol. 27, No. 5, pp.329-343.
- Park, J. W., Lee, Y. K., Song, J. J. and Choi, B. H., 2012, A New Coefficient for Three Dimensional Quantification of Rock Joint Roughness, Journal of Korean Society for Rock Mechanics, Vol. 22, No.2, pp. 106-119. https://doi.org/10.7474/TUS.2012.22.2.106
- Patton F. D., 1966, Multiple modes of shear failure in rock. Proc. 1st Congr. ISRM, Lisbon, Vol. 1, pp.509-513.
- Plesha, M, E., 1987, Rock joint: Theory, constitutive equations, Mech. of Geomaterial Interfaces, Selvadurai $ Boulon(ed.), pp. 375-393.
- Tse, R. and Cruden, D. M., 1979, Estimating joint roughness coefficient. Int. J. Rock Mech. Min. Sci. Geomech. Abstr., Vol. 16, pp. 303-307. https://doi.org/10.1016/0148-9062(79)90241-9
- Yang, Z. Y., and Chiang, D. Y., 2000, An experimental study on the progressive shear behaviour of rock joints with tooth-shaped asperities, Int. J. Rock Mech. Min. Sci., Vol. 37, pp. 1247-1259. https://doi.org/10.1016/S1365-1609(00)00055-1
- Yu, X. and Vayssade, B., 1991, Joint profiles and their roughness coefficeint, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Vol. 28, No. 4, pp. 333-336. https://doi.org/10.1016/0148-9062(91)90598-G
피인용 문헌
- Shear Behavior Characteristics of Rock Joints Considering Roughness Parameters vol.26, pp.5, 2016, https://doi.org/10.7474/TUS.2016.26.5.384