References
- Kim, H. S., Kim, J. W., Kim, Y. J., Lee, D. G., 2011, Impact of Fiber Projection from GMT-Sheet Moldings on Surface Unevenness, Journal of the Korean Society for Composite Materials 24:6 31-36. https://doi.org/10.7234/kscm.2011.24.6.031
- Kim, J. W., Kim, H. S., Kim, T. I., Lee, D. G., Sim, J. K., 2012, Strength and Efficiency during Lap Joining Molding of GMT-sheet, Journal of the Korean Society of Manufacturing Technology Engineers 21:6 1018-1023. https://doi.org/10.7735/ksmte.2012.21.6.1018
- Huh, Y. H., Lee, J. H., Kim, D. J., 2012, Effect of Stress Ratio on Fatigue Life of GFRP Composites for WT Blade, J. Mech. Sci. Technol. 26:7 2117-2120. https://doi.org/10.1007/s12206-012-0526-0
- Kim, D., Kim, Y. H., Gururaja, S., Ramulu, M., 2010, Processing and Fiber Content Effects on the Machinability of Compression Moulded Random Direction Short GFRP Composites, Int. J. Automot. Technol. 11:6 849-855. https://doi.org/10.1007/s12239-010-0101-6
- Han, D. S., Park, I. B., Kim, M. H., Noh, B. J., Kim, W. S., Lee, J. M., 2010, The Effects of Glass Fiber Reinforcement on The Mechanical Behavior of Polyurethane Foam, J. Mech. Sci. Technol. 24:1 263-266. https://doi.org/10.1007/s12206-009-1136-3
- Lee, D. G., Sim, J. K., Kim, J. W., 2006, Study on the Fiber Orientation and Fiber Content Ratio Distribution during the Injection Molding for FRP, Transactions of the Korean Society of Machine Tool Engineers 15:4 1-7.
- Lee, D. G., Sim, J. K., Kim, J. W., 2005, Fiber Orientation Distribution of Injection Molded Product on the Fiber-Reinforced Polymeric Composites, Transactions of the Korean Society of Machine Tool Engineers 14:1 73-80.
- Kim, J. W., Lee, D. G., 2006, Measurement of Fiber Content in Glass Mat Reinforced Thermoplastic Sheet by Image Processing, Key Eng. Mater. 306-308 811-816. https://doi.org/10.4028/www.scientific.net/KEM.306-308.811
- Kim, J. W., Lee, D. G., 2007, The Effect of Compression Ratio on the Fiber Orientation during Compression Moling of Short-Fiber Reinforced Composites, Journal of Korea Foundry Society 27:6 258-262.
- Roh, J. U., Choi, S. W., Lee, W. I., 2012, Assessment of Impregnation Characteristic of Unidirectional Glass Fiber Reinforced Polylactic acd (PLA), Proceedings of Spring Conference on the Korean Society of Composite Materials 33-34. (Seoul, Korea, May.)
- Kalpakjian, S., 1991, Masufacturing Processes for Engineering Materials, Addison-Wesley Pub. Co., Illinois.
- Kim, J. W., Lee, D. G., 2011, Creep and tensile properties of press molding joined GMT-Sheets, Trans. Nonferrous Met. Soc. China 21:s1 s170-s174. https://doi.org/10.1016/S1003-6326(11)61083-2
- Kim, J. W., Kim, H. S., Lee, D. G., 2011, Study on fibre orientation of weld line parts during injection moulding of fibre reinforced plastic by image processing, Mater. Res. Innov. 15:s1 s303--s306. https://doi.org/10.1179/143307511X12858957674274
- Hojo, H., Kim, E. G., Tamakawa, K., 1987, The Fibre Content Distribution of Compression Molded Long Fibre-Reinforced Thermoplastic Products, Int. Polym. Process. 1:2 60-65. https://doi.org/10.3139/217.870060
Cited by
- Manufacturing of GFRP Sheet Using Plain Weaving Method vol.38, pp.8, 2014, https://doi.org/10.3795/KSME-A.2014.38.8.849