참고문헌
- Matsubara S., 2001, A Computer Numerically Controlled Dieless Incremental Forming of a Sheet Metal, Proc. Instn. Mech. Engrs. 215 Part B 959-966.
- Shim, M. S., Park, J. J., 2001, Deformation Characteristics in Sheet Mental Forming with Small Ball, Trans. Mater. Process. 10:1 59-66.
- Allwood, J. M., Bramley, A. N., Ridgman, Mileham, A. R., 2006, A novel method for the rapid production of inexpensive dies and moulds with surfaces made by incremental sheet forming, Proc. Instn. Mech. Engrs. 220:2 Part B 323-327.
- Ambrogio, G., Costantino, I., De Napoli, L., Filice, L., Fratini, L., Muzzupappa, M., 2004, Influence of some relevant process parameters on the dimensional accuracy in incremental forming: a numerical and experimental investigation, J. Mater. Process. Technol. 153:154 501-507.
- Ham, M., Jeswiet, J., 2008, Dimensional Accuracy of Single Point Incremental Forming, Int. J. Mater. Form. 1: 1171-1174. https://doi.org/10.1007/s12289-008-0189-7
- Radu, M. C., Cristea, I., 2013, Processing Metal Sheets by SPIF and Analysis of Parts Quality, Mater. and Manuf. Process. 28: 287-293. https://doi.org/10.1080/10426914.2012.746702
- Song, X., Lu, B., Chen, J., Wang, Y., 2013, Influencing Factor Analysis on the Surface Quality of Incremental Forming Parts, J. Mech. Eng. 49:8 84-90.
- Micari, F., Ambrogio, G., Filice, L., 2007, Shape and dimensional accuracy in Single Point Incremental Forming: State of the art and future trends, J. Mater. Process. Technol 191 390-395. https://doi.org/10.1016/j.jmatprotec.2007.03.066
- Hirt, G. and Ames, J., 2004, Forming strategies and Process Modelling for CNC Incremental Sheet Forming, CIRP Ann. 53:1 203-206. https://doi.org/10.1016/S0007-8506(07)60679-9
- Ham, M. and Jeswiet, J., 2006, Single Point Incremental Forming and the Forming Criterial for AA3003, CIRP Ann. 55:1 241-244. https://doi.org/10.1016/S0007-8506(07)60407-7
- Kang, S. K, 2012, Analysis of Effects of Cutting Force and Surface Roughness in the Cutting Conditions of Plasma Source Ion Implantation Tools, J. of Korean Soc. of Manuf. Technol. 21:5 755-760. https://doi.org/10.7735/ksmte.2012.21.5.755
- Lee, S. P., Ha, S. K., 2008, Performance Evaluation for Coordinate Measuring Machine using Design of Experiments, Trans. of Korean Soc. of Mach. Tool Engrs. 17:4 133-139.
피인용 문헌
- Effective Process Parameters on Shape Dimensional Accuracy in Incremental Sheet Metal Forming vol.38, pp.4, 2015, https://doi.org/10.11627/jkise.2015.38.4.177
- Influence of the Part Shape Complexity and Die Type on Forming Accuracy in Incremental Sheet Metal Forming vol.23, pp.5, 2014, https://doi.org/10.7735/ksmte.2014.23.5.512
- 음각 점진성형에서 치수정밀도에 영향을 미치는 형상 파라미터 분석 vol.39, pp.4, 2016, https://doi.org/10.11627/jkise.2016.39.4.090
- 반응표면법을 이용한 Al5052 판재의 점진성형 최적화 연구 vol.30, pp.1, 2013, https://doi.org/10.5228/kstp.2021.30.1.27
- Development of a Dieless 6-Axis Double Side Incremental Forming Machine Using Two Forming Tools vol.30, pp.3, 2013, https://doi.org/10.7735/ksmte.2021.30.3.169