Earthquakes and Structures

  • 제5권4호
  • /
  • Pages.417-438
  • /
  • 2013
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Seismic strain analysis of buried pipelines in a fault zone using hybrid FEM-ANN approach

  • 투고 : 2013.04.29
  • 심사 : 2013.07.11
  • 발행 : 2013.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

This study was concerned on the application of a hybrid approach for analyzing the buried pipelines deformations subjected to earthquakes. Nonlinear time-history analysis of Finite Element (FE) model of buried pipelines, which was modeled using laboratory data, has been performed via selected earthquakes. In order to verify the FE model with experiments, a statistical test was done which demonstrated a good conformity. Then, the FE model was developed and the optimum intersection angle of pipeline and fault was obtained via genetic algorithm. Transient seismic strain of buried pipeline in the optimum intersection angle of pipeline and fault was investigated considering the pipes diameter, the distance of pipes from fault, the soil friction angles and seismic response duration of buried pipelines. Also, a two-layer perceptron Artificial Neural Network (ANN) was trained using results of FE model, and a nonlinear relationship was obtained to predict the bending strain of buried pipelines based on the pipes diameter, intersection angles of the pipelines and fault, the soil friction angles, distance of pipes from the fault, and seismic response duration; whereas it contains a wide range of initial input data without any requirement to laboratory measurements.

키워드

참고문헌

  1. ABAQUS (2010), ABAQUS user's manual, version 6.10, Simulia, USA.
  2. Abdoun, T.H., Ha, D., O'Rourke, M.J., Symans, M.D., O'Rourke, T.D., Palmer, M.C. and Stewart, H.E. (2009), "Factors influencing the behavior of buried pipelines subjected to earthquake faulting", Soil Dyn. Earthq. Eng., 29(3), 415-427. https://doi.org/10.1016/j.soildyn.2008.04.006
  3. American Lifelines Alliance-ASCE (2001), Guidelines for the design of buried steel pipe, [with addenda through February 2005], ASCE, USA.
  4. AWWA (2007), AWWA Standard for Poly-Ethylene (PE) pressure pipe and fittings, American Water Works Association, USA.
  5. Cheung, V. and Cannons, K. (2002), "An introduction to neural networks", University of Manitoba, Manitoba, Canada.
  6. Chipperfield, A.J., Fleming, P.J., Pohlheim, H. and Fonseca, C.M. (1994), "Genetic algorithm toolbox user's guide", ACSE Research Report No. 512, University of Sheffield, UK.
  7. Choo, Y.W., Abdoun, T.H., O'Rourke, M.J. and Ha, D. (2007), "Remediation for buried pipeline systems under permanent ground deformation", Soil Dyn. Earthq. Eng., 27(12), 1043-1055. https://doi.org/10.1016/j.soildyn.2007.04.002
  8. Dawson, C.W., Wilby, R.L., Harpham, C., Brown, M.R., Cranston, E. and Darby, E.J. (2000), "Modeling ranunculus presence in the rivers test and itchen using artificial neural networks", Proceeding of the 5th Inter'l Conference on GeoComputation, Greenwich, UK, August.
  9. Desmod, T.P., Power, M.S., Taylor, C.L. and Lau, R.W. (1995), "Behavior of large-diameter pipeline at fault crossings", Proceedings of ASCE TCLEE Conference, San Diego, USA, October.
  10. Earthquake Engineering Research Institute (1999), Kocaeli: Turkey Earthquake of August 17. EERI, Special Earthquake Report.
  11. Goldberg, D.E. and Kuo, C.H. (1987), "Genetic algorithms in pipeline optimization", J. Comp. Civil Eng., 1(2), 128-141. https://doi.org/10.1061/(ASCE)0887-3801(1987)1:2(128)
  12. Goldberg, D.E. (1989), Genetic algorithms in search, optimization and machine learning, Addison-Wesley Pub. Company, Boston, USA.
  13. Guo, H.Y., Zhang, L., Zhang, L.L. and Zhou, J.X. (2004), "Optimal placement of sensors for structural health monitoring using improved genetic algorithms", Smart Mater. Struct., 13(3), 528-534. https://doi.org/10.1088/0964-1726/13/3/011
  14. Ha, D., Abdoun, T.H., O'Rourke, M.J., Symans, M.D., O'Rourke, T.D., Palmer, M.C. and Stewart, H.E. (2008), "Centrifuge modeling of earthquake effects on buried high-density polyethylene (HDPE) pipelines crossing fault zones", J. Geotech. Eng. - ASCE, 134(10), 1501-1515. https://doi.org/10.1061/(ASCE)1090-0241(2008)134:10(1501)
  15. Howard, D. and Mark, B. (2006), Neural network toolbox for use with MATLAB. User's guide, The MathWorks, Inc., USA.
  16. http://peer.berkeley.edu/smcat/
  17. Jain, A.K., Mao, J. and Mohiuddin, K.M. (1996), "Artificial neural networks: a tutorial", Computer, 29(3), 31-44.
  18. Jennings, P.C. (1971), "Engineering features of the San-Fernando earthquake February 9, 1971", Earthquake Engineering Research Laboratory, California Institute of Technology Report, Pasadena, California, USA.
  19. Joshi, S., Prashant, A., Deb, A. and Jain, S.K. (2011), "Analysis of buried pipelines subjected to reverse fault motion", Soil Dyn. Earthq. Eng., 31(7), 930-940. https://doi.org/10.1016/j.soildyn.2011.02.003
  20. Karamitros, D.K., Bouckovalas, G.D. and Kouretzis, G.P. (2007), "Stress analysis of buried steel pipelines at strike-slip fault crossings", Soil Dyn. Earthq. Eng., 27(3), 200-211. https://doi.org/10.1016/j.soildyn.2006.08.001
  21. Kennedy, R.P., Chow, A.W. and Williamson, R.A. (1977), "Fault movement effects on buried oil pipeline", J. Transpo. Eng., 103(5), 617-633.
  22. Kennedy, R.P. and Kincaid, R.H. (1983), "Fault crossing design for buried gas oil pipelines", Proceedings of ASME-PVP Conference, Oregon, USA, June.
  23. Kokavessis, N.K. and Anagnostidis, G.S. (2006), "Finite element modeling of buried pipelines subjected to seismic loads, soil structure interaction using contact elements", Proceedings of ASME-PVP Conference, Vancouver, Canada, July.
  24. Lester, H.G. (2007), The Pipe/soil structure-actions and interactions: handbook of polyethylene pipe, Plastic Pipe Institute, USA.
  25. Li, J., Liu, W. and Bao, Y. (2008), "Genetic algorithm for seismic topology optimization of lifeline network systems", Earthq. Eng. Struct. Dyn., 37(11), 1295-1312. https://doi.org/10.1002/eqe.815
  26. Liang, J. and Sun, S. (2000), "Site effects on seismic behavior of pipelines: a review", J. Pressure Vessel Techn. - ASME, 122(4), 469-475. https://doi.org/10.1115/1.1285974
  27. Liu, M., Wang, Y.Y. and Yu, Z. (2008), "Response of pipelines under fault crossing", Proc. Inter' Offshore Polar Engi. Conference, Vancouver, Canada, July.
  28. MaCaffrey, M.A. and O'Rourke, T.D. (1983), "Buried pipeline response to reverse faulting during the 1971 SanFernando Earthquake", Proceedings of ASME-PVP Conference, Oregon, USA, June.
  29. Moghaddas Tafreshi, S.N., Tavakoli Mehrjardi, G. and Moghaddas Tafreshi, S.M. (2007), "Analysis of buried plastic pipes in reinforced sand under repeated-load using neural network and regression model", Int. J. Civil Eng., 5(2), 118-133.
  30. Nakata, T. and Hasuda, K. (1995), "Active faultI, Hyogoken Nanbu earthquake", Kagaku, 65, 127-42.
  31. Newmark, N.M. and Hall, W.J. (1975), "Pipeline design to resist large fault displacement", Proce.U.S. Nat'l Conference on Earthquake Eng., Ann Arbor, USA, June.
  32. Roudsari, M.T. and Hosseini, M. (2011), "Using neural network for reliability assessment of buried steel pipeline networks subjected to earthquake wave propagation", J. Appl. Sci., 11(18), 3233-3246. https://doi.org/10.3923/jas.2011.3233.3246
  33. Sinha, S.K. and Fieguth, P.W. (2006), "Neuro-fuzzy network for the classification of buried pipe defects", Autom. Constr., 15(1), 73-83. https://doi.org/10.1016/j.autcon.2005.02.005
  34. Takada, S., Hassani, N. and Fukuda, K. (2001), "A new proposal for simplified design of buried steel pipes crossing active faults", Earthq. Eng. Struct. Dyn., 30(8), 1243-1257. https://doi.org/10.1002/eqe.62
  35. Vazouras, P., Karamanos, S.A. and Dakoulas, P. (2010), "Finite element analysis of buried steel pipelines under strike-slip fault displacements", Soil Dyn. Earthq. Eng., 30(11), 1361-1376. https://doi.org/10.1016/j.soildyn.2010.06.011
  36. Wang, L.R.L. and Yeh, Y.A. (1985), "A refined seismic analysis and design of buried pipeline for fault movement", Earthq. Eng. Struct. Dyn., 13(1), 75-96. https://doi.org/10.1002/eqe.4290130109
  37. Liu, W., Xu, L. and Li, J. (2012), "Algorithms for seismic topology optimization of water distribution network", Sci. China Tech. Sci., 55(11), 3047-3056. https://doi.org/10.1007/s11431-012-4965-8
  38. Yi, T.H., Li, H.N. and Gu, M. (2011), "Optimal sensor placement for health monitoring of high-rise structure based on genetic algorithm", J. Math. Probl. Eng., Article ID 395101, 12 pages.
  39. Zhao, L., Cui, C. and Li, X. (2010), "Response analysis of buried pipelines crossing fault due to overlying soil rupture", Earthq. Sci., 23(1), 111-116. https://doi.org/10.1007/s11589-009-0072-8

피인용 문헌

  1. A semi-empirical model for peak strain prediction of buried X80 steel pipelines under compression and bending at strike-slip fault crossings vol.32, 2016, https://doi.org/10.1016/j.jngse.2016.04.054
  2. Optimal placement of sensors and piezoelectric friction dampers in the pipeline networks based on nonlinear dynamic analysis vol.36, pp.1, 2017, https://doi.org/10.1177/0263092317693504
  3. Assessing the Influence of Mining Impacts on Buildings using SVM and MLR Method vol.471, pp.1757-899X, 2019, https://doi.org/10.1088/1757-899X/471/5/052060
  4. Strain demand prediction method for buried X80 steel pipelines crossing oblique-reverse faults vol.12, pp.3, 2013, https://doi.org/10.12989/eas.2017.12.3.321
  5. An ANN‐based failure pressure prediction method for buried high‐strength pipes with stray current corrosion defect vol.8, pp.1, 2013, https://doi.org/10.1002/ese3.522
  6. A refined analytical strain analysis method for offshore pipeline under strike-slip fault movement considering strain hardening effect of steel vol.15, pp.2, 2013, https://doi.org/10.1080/17445302.2019.1611722
  7. Strain demand prediction of buried steel pipeline at strike-slip fault crossings: A surrogate model approach vol.20, pp.1, 2013, https://doi.org/10.12989/eas.2021.20.1.109
  8. Review of Dynamic Response of Buried Pipelines vol.12, pp.2, 2013, https://doi.org/10.1061/(asce)ps.1949-1204.0000527