Steel and Composite Structures

  • 제15권4호
  • /
  • Pages.357-377
  • /
  • 2013
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Degradation and damage behaviors of steel frame welded connections

  • Wang, Meng (School of Civil Engineering, Beijing Jiaotong University) ;
  • Shi, Yongjiu (Department of Civil Engineering, Tsinghua University) ;
  • Wang, Yuanqing (Department of Civil Engineering, Tsinghua University) ;
  • Xiong, Jun (Department of Civil Engineering, Tsinghua University) ;
  • Chen, Hong (Architectural Design and Research Institute, Tsinghua University)
  • 투고 : 2011.12.13
  • 심사 : 2013.07.22
  • 발행 : 2013.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

In order to study the degradation and damage behaviors of steel frame welded connections, two series of tests in references with different connection constructions were carried out subjected to various cyclic loading patterns. Hysteretic curves, degradation and damage behaviours and fatigue properties of specimens were firstly studied. Typical failure modes and probable damage reasons were discussed. Then, various damage index models with variables of dissipative energy, cumulative displacement and combined energy and displacement were summarized and applied for all experimental specimens. The damage developing curves of ten damage index models for each connection were obtained. Finally, the predicted and evaluated capacities of damage index models were compared in order to describe the degraded performance and failure modes. The characteristics of each damage index model were discussed in depth, and then their distributive laws were summarized. The tests and analysis results showed that the loading histories significantly affected the distributive shapes of damage index models. Different models had their own ranges of application. The selected parameters of damage index models had great effect on the developing trends of damage curves. The model with only displacement variable was recommended because of a more simple form and no integral calculation, which was easier to be formulated and embedded in application programs.

키워드

참고문헌

  1. Ballio, G., Calado, L. and Castiglioni, C.A. (1997), "Low cycle fatigue behaviour of structural steel members and connections", Fatigue Fract. Eng. Mater. Struct., 20(8), 1129-1146. https://doi.org/10.1111/j.1460-2695.1997.tb00318.x
  2. Banon, H., Biggs, J. and Irvine, H. (1981), "Seismic damage in reinforced concrete frames", J. Struct. Eng., 107(9), 1713-1728.
  3. Castiglioni, C.A., Mouzakis, H. and Carydis, P. (2007), "Constant and variable amplitude cyclic behavior of welded steel beam-to-column connections", J. Earthq. Eng., 11(6), 876-902. https://doi.org/10.1080/13632460601188027
  4. Castiglioni, C.A. and Pucinotti, R. (2009), "Failure criteria and cumulative damage models for steel components under cyclic loading", J. Construct. Steel Res., 65(4), 751-765. https://doi.org/10.1016/j.jcsr.2008.12.007
  5. Chen, H. (2001), "Seismic brittle fracture mechanism and seismic behavior of steel beam-column connections in tall building", Doctoral Dissertation, Xuzhou: China University of Mining and Technology, 25-85.
  6. Coffin, L.F. (1954), "A study of the effects of cyclic thermal stresses on a ductile metal", Transact. ASME, 76.
  7. Darwin, D. and Nmai, C.K. (1986), "Energy dissipation in RC. beams under cyclic load", J. Struct. Eng., 112(8), 1829-1846. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:8(1829)
  8. Dong, B. and Shen, Z.Y. (1997), "An experiment-based cumulative damage mechanics model of steel under cyclic loading", Adv. Struct. Eng., 1(1), 79-87.
  9. Egor, P., Yang, T. and Chang, S. (1998), "Design of Steel MRF Connections before and after 1994 Northridge Earthquake", Eng. Struct., 20(12), 1030-1038. https://doi.org/10.1016/S0141-0296(97)00200-9
  10. Gosain, N.K., Brown, R.H. and Jirsa, J.O. (1977), "Shear requirement for load reversals on RC members", J. Struct. Eng., 103(7), 1461-1476.
  11. Hwang, T.H. and Scribner, C.F. (1984), "R/C member cyclic responses during various loadings", J. Struct. Eng., 110(3), 477-489. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:3(477)
  12. Ibarra, L.F. and Krawinkler, H. (2005), "Global Collapse of Frame Structures under Seismic Excitations", Pacific Earthquake Engineering Research Center, Report 06.
  13. Ibarra, L.F., Medina, R.A. and Krawinkler H. (2005), "Hysteretic models that incorporate strength and stiffness deterioration", Earthq. Eng. Struct. Dyn., 34(12), 1489-1511. https://doi.org/10.1002/eqe.495
  14. Krawinkler, H. and Zohrei, M. (1983), "Cumulative damage in steel structures subjected to earthquake ground motion", Comput. Struct., 16(1-4), 531-541. https://doi.org/10.1016/0045-7949(83)90193-1
  15. Li, F.X., Kanao I., Li, J. and Morisako, K. (2009), "Local Buckling of RBS Beams Subjected to Cyclic Loading", J. Struct. Eng., 135(12), 1491-1498. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000073
  16. Li, H.Q., Zuo, Q.G., Yu, Z.C., Jiang, Y.Q. and Xilin, L.V. (2004), "Analysis and experiment of cumulated damage of steel frame structures under earthquake action", J. Build. Struct., 25(3), 69-74.
  17. Li, J. (2002), "Investigation on energy dissipation and accumulative damage of welded beam-to-column connections under earthquake cyclic loading", Ph.D. Dissertation, College of Materials Science & Engineering, Tianjin University, Tianjin, China.
  18. Lignos, D. (2008), "Sidesway collapse of deteriorating structural system under seismic eExcitations", Ph.D. Dissertation, Department of Civil and Environmental Engineering, Stanford University, Stanford, CA.
  19. Loulelis, D., Hatzigeorgiou, G.D. and Beskos, D.E. (2012), "Moment resisting steel frames under repeated earthquake", Earthq. Struct. Int. J., 3(3), 231-248. https://doi.org/10.12989/eas.2012.3.3_4.231
  20. Manson, S.S. (1953), "Behavior of materials under conditions of thermal stress, heat transfer symposium", University of Michigan Engineering Research Institute.
  21. Ministry of Housing and Urban-Rural Development of the People's Republic of China (2001), GB50011-2001 Code for Seismic Design of Buildings, China Architecture & Building Press, Beijing, China.
  22. National Natural Science Foundation Committee (2006), Subject Development Strategy Research Report-Construction, Environment and Civil Engineering II, Beijing, Science Press.
  23. Ou, J.P., Niu, D.T. and Wang, G.Y. (1990), "Fuzzy dynamical reliability analysis and design of muti-storey nonlinear a seismic steel structures", Earthq. Eng. And Eng. Vib., 10(4), 27-37.
  24. Park, Y.J., Ang, A.H.S. (1985), "Mechanistic seismic damage model for reinforced concrete", J. Struct. Eng., 111(4), 722-39. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:4(722)
  25. Papagiannopoulos, G.A. and Beskos, D.E. (2011), "Modal strength reduction factors for seismic design of plane steel frames", Earthq. Struct. Int. J., 2(1), 65-88. https://doi.org/10.12989/eas.2011.2.1.065
  26. Rahnama, M. and Krawinkler, H. (1993), "Effect of soft soils and hysteresis models on seismic design spectra", Blume Earthquake Engineering Research Center, Report No. 108, Department of Civil Engineering, Stanford University, Stanford, CA, USA.
  27. Xiong, J. (2011), "Research on the damage behavior and calculation model of welded connections in steel frames under earthquakes", Doctoral Dissertation, Tsinghua University, Beijing, China.
  28. Wang, M., Shi, Y.J. and Shi G. (2009(S)), "Analysis on degraded and damage hysteretic model of high-rise steel frame structures and connections", Industrial Construction, 973-981.
  29. Zareian, F. (2006), Simplified Performance-Based Earthquake Engineering, Department of Civil and Environmental Engineering, Stanford University, Stanford, CA, USA.

피인용 문헌

  1. Earthquake Damage Evaluation of T-Shaped SRC Composite Column-Steel Beams in 3D Connection Joints vol.18, pp.5, 2015, https://doi.org/10.1260/1369-4332.18.5.701
  2. Rapid S-N type life estimation for low cycle fatigue of high-strength steels at a low ambient temperature vol.33, pp.6, 2013, https://doi.org/10.12989/scs.2019.33.6.777