참고문헌
- M. Durnholz, G. Eifler and H. Endres, "Exhaust-gas Recirculation - A Measure to Reduce Exhaust Emissions of DI Diesel Engines," SAE 920725, 1992.
- L. Mikulic, M. Kühn, J. Schommers and E. Willig, "Exhaust-emission Optimization of DI-diesel Passenger Car Engine with High-pressure Fuel Injection and EGR," SAE 931035, 1993.
- Y. Park, B. Oh, M. Lee and M. Sunwoo, "Development of Turbine Mass Flow Rate Model for Variable Geometry Turbocharger Using Artificial Neural Network," Transactions of the Korean Society of Mechanical Engineers - B, Vol.34, No.8, pp.783-790, 2010. https://doi.org/10.3795/KSME-B.2010.34.8.783
- Y.-Y. Wang, I. Haskara and O. Yaniv, "Quantitative Feedback Design of Air and Boost Pressure Control System for Turbocharged Diesel Engines," Control Engineering Practice, Vol.19, No.6, pp.626-637, 2011. https://doi.org/10.1016/j.conengprac.2011.02.006
- S. Jeong, J. Chung, J. Kang and W. Kang, "The Effect of Control of the VGT and EGR in a Turbocharged Common-rail Diesel Engine on Emissions under Partial Loads Conditions," Transactions of KSAE, Vol.15, No.6, pp.151-158, 2007.
- M. Jankovic and I. Kolmanovsky, "Constructive Lyapunov Control Design for Turbocharged Diesel Engines," Control Systems Technology, IEEE Transactions on, Vol.8, No.2, pp.288-299, 2000. https://doi.org/10.1109/87.826800
- J. Chauvin, G. Corde, N. Petit and P. Rouchon, "Motion Planning for Experimental Airpath Control of a Diesel Homogeneous Charge-compression Ignition Engine," Control Engineering Practice, Vol.16, No.9, pp.1081-1091, 2008. https://doi.org/10.1016/j.conengprac.2007.12.001
- B. Oh, M. Lee, Y. Park, K. Lee, M. Sunwoo, K. Nam and S. Cho, "Feedforward EGR Control of a Passenger Car Diesel Engine Equipped with a DC Motor Type EGR Valve," Transactions of KSAE, Vol.19, No.5, pp.14-21, 2011.
- J. Wahlstrom, Control of EGR and VGT for Emission Control and Pumping Work Minimization in Diesel Engines, Ph. D. Dissertation, Linkoping University, Linkoping, 2006.
- L. Eriksson, J. Wahlstrom and M. Klein, Physical Modeling of Turbocharged Engines and Parameter Identification Automotive Model Predictive Control, Automotive Model Predictive Control, 1st Edn., Springer, pp.53-71, 2010.
- L. Guzzella and C. H. Onder, Introduction to Modeling and Control of Internal Combustion Engine Systems, Springer, 2010.
- E. Alfieri, A. Amstutz and L. Guzzella, "Gain-scheduled Model-based Feedback Control of the Air/fuel Ratio in Diesel Engines," Control Engineering Practice, Vol.17, No.12, pp.1417-1425, 2009. https://doi.org/10.1016/j.conengprac.2008.12.008
- J. B. Heywood, Internal Combustion Engine Fundamentals, McGraw Hill, New York, 1988.
- C. Ericson, Mean Value Modelling of a Poppet Valve Egr-system, M. S. Thesis, University of Linkoping, Linkoping, 2004.
- M. Jung, Mean-value Modelling and Robust Control of the Airpath of a Turbocharged Diesel Engine, Ph. D. Dissertation, University of Cambridge, Cambridge, 2003.
- K. Lee, I. Park, M. Sunwoo and W. Lee, "AUTOSAR-ready Light Software Architecture for Automotive Embedded Control Systems," Transactions of KSAE, Vol.21, No.1, pp.68-77, 2013. https://doi.org/10.7467/KSAE.2013.21.1.068
- I. Park, W. Lee and M. Sunwoo, "Application Software Modeling and Integration Methodology using AUTOSAR-ready Light Software Architecture," Transactions of KSAE, Vol.20, No.6, pp.117-125, 2012. https://doi.org/10.7467/KSAE.2012.20.6.117
피인용 문헌
- Resource-aware integration of AUTOSAR-compliant ECUs with an empirical wcet prediction model vol.17, pp.4, 2016, https://doi.org/10.1007/s12239-016-0071-4
- Gain-scheduled EGR control algorithm for light-duty diesel engines with static-gain parameter modeling vol.18, pp.4, 2017, https://doi.org/10.1007/s12239-017-0058-9