DOI QR코드

DOI QR Code

Inelastic lateral-torsional buckling strengths of stepped I-beams subjected to general loading condition

  • Park, Jong Sup (Department of Civil Engineering, Sangmyung University) ;
  • Park, Yi Seul (Department of Civil Engineering, Sangmyung University)
  • 투고 : 2013.04.23
  • 심사 : 2013.10.02
  • 발행 : 2013.10.25

초록

The cross sections of multi-span beams are sometimes suddenly increased at the interior support of continuous beams to resist high negative moment. An earlier study on elastic lateral torsional buckling of stepped beams was conducted to propose new design equations. This research aims to continue the earlier study by considering the effect of inelastic buckling of stepped beams subjected to pure bending and general loading condition. A three-dimensional finite element-program ABAQUS and a statistical program MINITAB were used in the development of new design equations. The inelastic lateral torsional buckling strengths of 36 and 27 models for singly and doubly stepped beams, respectively, were investigated. The general loading condition consists of 15 loading cases based on the number of inflection point within the unbraced length of the stepped beams. The combined effects of residual stresses and geometrical imperfection were also considered to evaluate the inelastic buckling strengths. The proposed equations in this study will definitely improve current design methods for the inelastic lateral-torsional buckling of stepped beams and will increase efficiency in building and bridge design.

키워드

참고문헌

  1. American Association of State Highway and Transportation Officials (AASHTO) (2010), llIFD Bridge Design Specifications, Washington, D. C.
  2. ABAQUS (2011), Standard Users Manual, Hibbit, Karlsson and Sorensen, Inc., Version 6.7.
  3. American Institute of Steel Construction (2010), Specifications, Chicago, Illinois.
  4. Hyundai Steel (2006), Korea Standard for Allowable Manufacturing Dimensions.
  5. Kim, J.M, Kim, S.J, Park, J.S. and Kang, Y.J. (2008), "A study on inelastic lateral-torsional buckling of stepped I-beams subjected to pure bending", Journal of Korean Society of Steel construction, KSSC, 20(2), 1-10.
  6. Kirby, P.A. and Nethercot, D.A. (1979), Designfor Structural Stability, Wiley, New York
  7. Kitipomchai, S. and Trahair, N.S. (1975), "Inelastic buckling of simply supported steel I-beams", Journal of the Structural Division, ASCE, 101,(7), 1333-1347.
  8. Lellep, J. and Kraav, T. (2011), "Elastic buckling of stepped beams with cracks", Institute of Mathematics, University of Tartu, 1-6.
  9. Li, X. (2007), "Flexural strength for general lateral-torsional buckling", Journal of Structural Engineering, ASCE, 133(5), 674-682. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:5(674)
  10. MINITAB 14 (2007), Statistic, Minitap Inc.
  11. Mohebkah, A. (2010), "Lateral buckling resistance of inelastic I-beams under off-shear center loading", Thin-Walled Structures, 49, 431-436.
  12. Mohebkhah, A. and Chegeni, B. (2012), "Local-global interactive buckling of built-up I-beam sections", Thin-Walled Structures, 56,33-37. https://doi.org/10.1016/j.tws.2012.03.018
  13. Nawaz, R. (2009), "Equivalent uniform moment factors for lateral torsional buckling of steel beams", Master of Engineering Report in Structural Engineering, University of Alberta, Alberta.
  14. Nethercot, D.A and Trahair, NS. (1976), "Inelastic lateral buckling of determinate beams", Journal of Structural Division, ASCE, 102(4), 701-717.
  15. Pi, Y.L. and Trahair, N.S. (1995), "Inelastic torsion of steel I-beams", Journal of Structural Engineering, ASCE, 121(22), 609-620. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:4(609)
  16. Park, J.S. and Park, Y.S. (2013), "An experimental study on inelastic lateral-torsional buckling strength of monosymmetric stepped I-beam subjected to a concentrated load", International Journal of Advancements in Computing Technology, 5(11), 211-216. https://doi.org/10.4156/ijact.vol5.issue11.22
  17. Park, J.S. and Stallings, J.M. (2003), "Lateral-torsional buckling of stepped beams", Journal of Structural Engineering, ASCE, 60(2), 147-160.
  18. Park, J.S. and Stallings, J.M. (2005), "Lateral-torsional buckling of stepped beams with continuous bracing", Journal of Bridge Engineering, ASCE, 10(1), 87-95. https://doi.org/10.1061/(ASCE)1084-0702(2005)10:1(87)
  19. Serna, M.A., Lopes, A., Puente, I. and Yong, D.J. (2006), "Equivalent uniform moment factors for lateral torsional buckling of steel members", Journal of Constructional Steel Research, 62, 566-580. https://doi.org/10.1016/j.jcsr.2005.09.001
  20. Trahair, N S. (1993), Flexural Torsional Buckling of Structures, CRC Press, Boca Raton, FL.
  21. Trahair, N.S. (2011), "Inelastic buckling design of monosymmetric I-beams", Engineering Structures, 34, 564-571.
  22. Trahair, N.S. and Kitipomchai, S. (1971), "Elastic lateral buckling of stepped I-beams", Journal of Structural Engineering, ASCE, 97(10), 2535-2548.

피인용 문헌

  1. Investigation of Lateral-Torsional Buckling Strength Trends in Monosymmetric Stepped I-Beams Subjected to Several Loading Conditions vol.14, pp.4, 2014, https://doi.org/10.9798/KOSHAM.2014.14.4.33
  2. Inelastic Buckling Strength of Stepped I-Beams at Midspan Subjected to Uniform Bending vol.18, pp.5, 2018, https://doi.org/10.9798/KOSHAM.2018.18.5.185
  3. Experimental study on partially-reinforced steel RHS compression members vol.63, pp.3, 2017, https://doi.org/10.12989/sem.2017.63.3.385