Structural Engineering and Mechanics

  • 제48권2호
  • /
  • Pages.241-255
  • /
  • 2013
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

The receding contact problem of two elastic layers supported by two elastic quarter planes

  • Yaylaci, Murat (Naval Architecture and Marine Engineering Department, Karadeniz Technical University) ;
  • Birinci, Ahmet (Civil Engineering Department, Karadeniz Technical University)
  • 투고 : 2012.10.31
  • 심사 : 2013.10.02
  • 발행 : 2013.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

The receding contact problem for two elastic layers whose elastic constants and heights are different supported by two elastic quarter planes is considered. The lower layer is supported by two elastic quarter planes and the upper elastic layer is subjected to symmetrical distributed load whose heights are 2a on its top surface. It is assumed that the contact between all surfaces is frictionless and the effect of gravity force is neglected. The problem is formulated and solved by using Theory of Elasticity and Integral Transform Technique. The problem is reduced to a system of singular integral equations in which contact pressures are the unknown functions by using integral transform technique and boundary conditions of the problem. Stresses and displacements are expressed depending on the contact pressures using Fourier and Mellin formula technique. The singular integral equation is solved numerically by using Gauss-Jacobi integration formulation. Numerical results are obtained for various dimensionless quantities for the contact pressures and the contact areas are presented in graphics and tables.

키워드

참고문헌

  1. Aghili, A. (1999), "Mixed boundary value problems of the quarter-plane", Ph. D. Thesis State University of New York at Stany Brook Applied Mathematics and Statistics, New York, August.
  2. Akavci, S. (1999), "The frictionless contact problem of an elastic layer supported by two elastic quarter planes", Ph. D. Thesis, C.U..
  3. Aksogan, O., Akavci, S. and Becker, A.A. (1996), "A comparative study of the contact problem for an elastic layer supported by two elastic quarter planes", Journal of Faculty of Engineering Architecture, 11, 25-31.
  4. Aksogan, O., Akavci, S. and Becker, A.A. (1997), "The solution of the nonsymmetrical contact problem of an elastic layer supported by two elastic quarter planes using three different methods", Journal of Faculty of Engineering Architecture, 12, 1-13.
  5. Aksogan, O., Akavci, S. and Becker, A.A. (1999) "The solution of the nonsymmetrical contact problem of an elastic layer supported by two elastic quarter planes", European Conference on Computational Mechanics, ECCM99, Germany.
  6. Bakioglu, M. (1976), "The frictionless contact problem of an elastic layer", Ph.D. Thesis, Istanbul Technical University, Istanbul.
  7. Carbone, G. and Mangialardi, L. (2008), "Analysis of the adhesive contact of confined layers by using a Green's function approach", Journal of the Mechanics and Physics of Solids, 56, 684-706. https://doi.org/10.1016/j.jmps.2007.05.009
  8. Civelek, M.B. and Erdogan, F. (1974), "The axisymmetrical double contact problem for a frictionless elastic layer", International Journal of Solids and Structures, 10, 639-659. https://doi.org/10.1016/0020-7683(74)90048-1
  9. Comez, I., Birinci, A. and Erdol, R. (2004), "Double receding contact problem for a rigid stamp and two elastic layers", European Journal of Mechanics-A/Solids, 23, 301-309. https://doi.org/10.1016/j.euromechsol.2003.09.006
  10. Dundurs, J. and Lee, M.S. (1972), "Stress concentration at a sharp edge in contact problems", Journal of Elasticity, 2, 109-112. https://doi.org/10.1007/BF00046059
  11. El- Borgi, S., Abdelmoula, R. and ve Keer, L. (2006), "A receding contact plane problem between a functionally graded layer and a homogeneous substrate", International Journal of Solids and Structures, 43, 658-674. https://doi.org/10.1016/j.ijsolstr.2005.04.017
  12. Erdogan, F., Gupta, G.D. and Cook, T.S. (1973), "Numerical solution of singular integral equations in methods of analysis and solution of crack problems", Noordhoff, Groningen.
  13. Galin, L.A. (1961), "Contact problems in the theory of elasticity", North Caroline State Collage Articles on the Application Series, Raleigh, N.C.
  14. Gerber, C.E. (1968), "Contact problems for the elastic quarter-plane and quarter-space", Ph. D. Thesis, Stanford University Engineering Mechanics, Michigan, March.
  15. Guler, M.A., Gulver, Y.F. and Nart, E. (2012), "Contact analysis of thin films bonded to graded coatings", International Journal of Mechanical Sciences, 55, 50-64. https://doi.org/10.1016/j.ijmecsci.2011.12.003
  16. Hertz, H. (1895), Gessammelte Worke von Heinrich Hertz, Leipzig.
  17. Kahya, V., Ozsahin, T.S., Birinci, A. and Erdol, R. (2007), "A receding contact problem for an anisotropic elastic medium consisting of a layer and a half plane", International Journal of Solids and Structures, 44, 5695-5710. https://doi.org/10.1016/j.ijsolstr.2007.01.020
  18. Karuppanan, S., Churchman, C.M., Hills, D.A. and Giner, E. (2008), "Sliding frictional contact between a square block and an elastically similar half-plane", European Journal of Mechanics-A/Solids, 27, 443-459. https://doi.org/10.1016/j.euromechsol.2007.09.001
  19. Keer, L.M., Dundurs, J. and Tsai, K.C. (1972), "Problems involving a receding contact between a layer and a half space", Journal of Applied Mechanics, 39, 1115-1120. https://doi.org/10.1115/1.3422839
  20. Ke, L.L. and Wang, Y.S. (2006), "Two-dimensional contact mechanics of functionally graded materials with arbitrary spatial variations of material properties", International Journal of Solids and Structures, 43, 5779-5798. https://doi.org/10.1016/j.ijsolstr.2005.06.081
  21. Krenk, S. (1975), "On quadrate formulas for singular integral-equations of 1st and 2nd kind quarterly of applied mathematics", 33, 225-232.
  22. Long, J.M. and Wang, G.F. (2013), "Effects of surface tension on axisymmetric Hertzian contact problem", Mechanics of Materials, 56, 65-70. https://doi.org/10.1016/j.mechmat.2012.09.003
  23. Mahmoud, F.F., El-Shafei, A.G., Abdelrahman, A.A. and Attia, M.A. (2012), "A numerical solution for contact problem with finite deformation in nonlinear Schapery viscoelastic solids", Ain Shams Engineering Journal, 3, 141-151. https://doi.org/10.1016/j.asej.2011.12.006
  24. Menshykov, O.V., Menshykov, V.A. and Guz, I.A. (2008), "The contact problem for an open penny-shaped crack under normally incident tension-compression wave", Engineering Fracture Mechanics, 75, 1114-1126. https://doi.org/10.1016/j.engfracmech.2007.04.017
  25. Perkowski, D.M., Matysiak, S.J. and Kulchytsky-Zhyhailo, R. (2007), "On contact problem of an elastic laminated half-plane with a boundary normal to layering", Composites Science and Technology, 67, 2683-2690. https://doi.org/10.1016/j.compscitech.2007.02.013
  26. Persson, B.N.J. (2006), "Contact mechanics for randomly rough surfaces", Surface Science Reports, 61, 201-227. https://doi.org/10.1016/j.surfrep.2006.04.001
  27. Ratwani, M. and ve Erdogan, F. (1973), "On the plane contact problem for a frictionless elastic layer", International Journal of Solids and Structures, 9, 921-936. https://doi.org/10.1016/0020-7683(73)90021-8
  28. Uffliand, I.S. (1961), "Survey of articles on the applications of integral transforms in the theory of elasticity", North Caroline State Collage Articles on the Application Series, Raleigh, N.C.
  29. Yang, J. and Ke, L.L. (2008), "Two-dimensional contact problem for a coating- graded layer- substrate structure under a rigid cylindrical punch", International Journal of Mechanical Sciences, 50, 985-994. https://doi.org/10.1016/j.ijmecsci.2008.03.002

피인용 문헌

  1. Performance analysis of spherical indentation process during loading and unloading - a contact mechanics approach vol.52, pp.3, 2014, https://doi.org/10.12989/sem.2014.52.3.469
  2. Analytical solution of a contact problem and comparison with the results from FEM vol.54, pp.4, 2015, https://doi.org/10.12989/sem.2015.54.4.607
  3. On the receding contact between an inhomogeneously coated elastic layer and a homogeneous half-plane vol.112, 2017, https://doi.org/10.1016/j.mechmat.2017.05.007
  4. Analytical and finite element solution of a receding contact problem vol.54, pp.1, 2015, https://doi.org/10.12989/sem.2015.54.1.069
  5. A semianalytical and finite-element solution to the unbonded contact between a frictionless layer and an FGM-coated half-plane 2017, https://doi.org/10.1177/1081286517744600
  6. Analysis of material dependency in an elastic - plastic contact models using contact mechanics approach vol.53, pp.5, 2015, https://doi.org/10.12989/sem.2015.53.5.1051
  7. A receding contact problem between a functionally graded layer and two homogeneous quarter planes vol.227, pp.6, 2016, https://doi.org/10.1007/s00707-016-1580-y
  8. On the Receding Contact Between a Homogeneous Elastic Layer and a Half-plane Substrate Coated with Functionally Graded Materials pp.1793-6969, 2018, https://doi.org/10.1142/S0219876218440085
  9. On the receding contact between a two-layer inhomogeneous laminate and a half-plane vol.66, pp.3, 2018, https://doi.org/10.12989/sem.2018.66.3.329
  10. Damping and vibration response of viscoelastic smart sandwich plate reinforced with non-uniform Graphene platelet with magnetorheological fluid core vol.33, pp.6, 2013, https://doi.org/10.12989/scs.2019.33.6.891
  11. Artificial neural network calculations for a receding contact problem vol.25, pp.6, 2013, https://doi.org/10.12989/cac.2020.25.6.551
  12. Finite element modeling of contact between an elastic layer and two elastic quarter planes vol.26, pp.2, 2020, https://doi.org/10.12989/cac.2020.26.2.107
  13. Examination of analytical and finite element solutions regarding contact of a functionally graded layer vol.76, pp.3, 2013, https://doi.org/10.12989/sem.2020.76.3.325
  14. Study of tensile behavior of Y shape non-persistent joint using experimental test and numerical simulation vol.26, pp.6, 2013, https://doi.org/10.12989/cac.2020.26.6.565
  15. Influences of porosity distributions and boundary conditions on mechanical bending response of functionally graded plates resting on Pasternak foundation vol.38, pp.1, 2013, https://doi.org/10.12989/scs.2021.38.1.001
  16. Investigation of continuous and discontinuous contact cases in the contact mechanics of graded materials using analytical method and FEM vol.27, pp.3, 2013, https://doi.org/10.12989/cac.2021.27.3.199
  17. Examination of contact problem between functionally graded punch and functionally graded layer resting on elastic plane vol.78, pp.2, 2021, https://doi.org/10.12989/sem.2021.78.2.135
  18. An efficient higher order shear deformation theory for free vibration analysis of functionally graded shells vol.40, pp.2, 2013, https://doi.org/10.12989/scs.2021.40.2.307
  19. Z shape joints under uniaxial compression vol.12, pp.2, 2013, https://doi.org/10.12989/acc.2021.12.2.105
  20. Influence of non-persistent joint sets on the failure behaviour of concrete under uniaxial compression test vol.28, pp.3, 2013, https://doi.org/10.12989/cac.2021.28.3.289
  21. Minimum contact stress modification for profile curve design defects in the beam-spring-cone docking mechanism vol.235, pp.22, 2013, https://doi.org/10.1177/09544062211003625