DOI QR코드

DOI QR Code

Probabilistic seismic demand models and fragility estimates for reinforced concrete bridges with base isolation

  • Gardoni, Paolo (Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign) ;
  • Trejo, David (School of Civil and Construction Engineering, Oregon State University)
  • 투고 : 2011.03.31
  • 심사 : 2013.01.03
  • 발행 : 2013.05.25

초록

This paper proposes probabilistic models for estimating the seismic demands on reinforced concrete (RC) bridges with base isolation. The models consider the shear and deformation demands on the bridge columns and the deformation demand on the isolation devices. An experimental design is used to generate a population of bridges based on the AASHTO LRFD Bridge Design Specifications (AASHTO 2007) and the Caltrans' Seismic Design Criteria (Caltrans 1999). Ground motion records are used for time history analysis of each bridge to develop probabilistic models that are practical and are able to account for the uncertainties and biases in the current, common deterministic model. As application of the developed probabilistic models, a simple method is provided to determine the fragility of bridges. This work facilitates the reliability-based design for this type of bridges and contributes to the transition from limit state design to performance-based design.

키워드

참고문헌

  1. AASHTO (the American Association of State Highway and Transportation Officials). (2007), LRFD Bridge design specifications, 4th Ed., Washington, D.C.
  2. Abrahamson, N.A. and Silva, W.J (1997), "Empirical response spectral attenuation relations for shallow crustal earthquakes", Seismol. Res. Lett., 68(1), 94-127. https://doi.org/10.1785/gssrl.68.1.94
  3. Albert, J. (2007), Bayesian computation with R, Springer, New York, N.Y.
  4. Ang, A.H.S. and Tang, W.H. (2007), Probability concepts in engineering-emphasis on applications in civil & environmental engineering, 2nd Ed., Wiley, New York, N.Y.
  5. API (the American Petroleum Institute). (1993), Recommended practice for planning, designing, and constructing fixed offshore platforms - Load and resistance factor design, Report RP2A-LRFD, American Petroleum Institute, Washington D.C.
  6. ATC (the Applied Technology Council). (1996), Seismic evaluation and retrofit of concrete buildings, Report ATC-40, Redwood City, C.A.
  7. ATC (the Applied Technology Council). (2005), Improvement of nonlinear static seismic analysis procedures, Report FEMA-440, Redwood City, CA.
  8. Barker, R.M. and Puckett, J.A. (2007), Design of highway bridges: An LRFD approach, John Wiley and Sons, N.Y.
  9. Bates, R.A., Buck, R.J., Riccomagno, E. and Wynn, H.P. (1996), "Experimental design and observation for large systems", J. Royal Statist. Soc., 58(1), 77-94.
  10. Bommer, J.J. and Acevedo, A.B. (2004), "The use of real earthquake accelerograms as input to dynamic analysis", J. Earthq. Eng., 8(1), 43-91.
  11. Box, G.E.P. and Tiao, G.C. (1992), Bayesian inference in statistical analysis, Wiley, New York, N.Y.
  12. Caltrans. (1999), Seismic design criteria, California Dept. of Transportation, Sacramento, C.A.
  13. Chang, Y.W. and Seidensticker, R.W. (1993), Dynamic characteristics of bridge stone low shear modulus-high damping seismic isolation bearings, Report ANL/RE-93/7, Reactor Engineering Division, Argonne National Laboratory, Argonne, I.L.
  14. Cheng, F.Y., Jiang, H. and Lou, K. (2008), Smart structures: Innovative systems for seismic response control, Taylor & Francis Group, F.L.
  15. Choe, D., Gardoni, P. and Rosowsky, D. (2007), "Closed-form fragility estimates parameter sensitivity and bayesian updating for RC columns", J. Eng. Mech.-ASCE, 133(7), 833-843. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:7(833)
  16. Chopra, A.K. (2000), Dynamics of structures: Theory and applications to earthquake engineering, Prentice Hall, Upper Saddle River, N.J.
  17. Chopra, A.K. and Goel, R.K. (1999), Capacity-demand-diagram methods for estimating seismic deformation of inelastic structures: SDF systems, Report 1999/02, Pacific Earthquake Engineering Research Center, Univ. of California, Berkeley, C.A.
  18. Der Kiureghian, A. and Ke, J.B. (1985), "Finite-element based reliability analysis of frame structures", Proc., ICOSSAR '85, 4th Int. Conf. on Structural Safety and Reliability, IASSAR, New York, 1, 395-404.
  19. Ditlevsen, O. and Madsen, H.O. (1996), Structural reliability methods, Wiley, New York.
  20. Fajfar, P. (1999), "Capacity spectrum method based on inelastic demand spectra", Earthq. Eng. Struct. D., 28(9), 979-993. https://doi.org/10.1002/(SICI)1096-9845(199909)28:9<979::AID-EQE850>3.0.CO;2-1
  21. FEMA (the Federal Emergency Management Agency). (1997), NEHRP Commentary on the guidelines for the seismic rehabilitation of buildings, Report FEMA-274, the Federal Emergency Management Agency, Washington, D.C.
  22. Freeman, S.A. (1998), "The capacity spectrum method as a tool for seismic design", Proceedings of the Eleventh European Conference on Earthquake Engineering, Paris, France, 6-11.
  23. Gardoni, P., Der Kiureghian, A. and Mosalam, K.M. (2002), "Probabilistic capacity models and fragility estimates for RC columns based on experimental observations", J. Eng. Mech.-ASCE, 128(10), 1024-1038. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:10(1024)
  24. Gardoni, P., Mosalam, K.M. and Der Kiureghian, A. (2003), "Probabilistic seismic demand models and fragility estimates for RC bridges", J. Earthq. Eng., 7(1), 79-106.
  25. Hasting, W.K. (1970), "Monte Carlo sampling methods using markov chains and their applications", Biometrika, 57(1), 97-109. https://doi.org/10.1093/biomet/57.1.97
  26. Hirata, K., Kobayashi, Y., Kameda, H. and Shiojiri, H. (1991), "Fragility of seismically isolated FBR structure", Nucl. Eng. Des., 128(1991), 227-236. https://doi.org/10.1016/0029-5493(91)90104-P
  27. Huang, Q., Gardoni, P. and Hurlebaus, S. (2010), "Probabilistic seismic demand models and fragility estimates for reinforced concrete highway bridges with one single-column bent", J. Eng. Mech.-ASCE, 136(11), 1340-1353. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000186
  28. Karim, K.R. and Yamazaki, F. (2001), "Effect of earthquake ground motions on fragility curves of highway bridge piers based on numerical simulation", Earthq. Eng. Struct. D., 30(12), 1839-1856. https://doi.org/10.1002/eqe.97
  29. Karim, K.R. and Yamazaki, F. (2003), "A simplified method of constructing fragility curves for highway bridges", Earthq. Eng. Struct. D., 32(10), 1603-1626. https://doi.org/10.1002/eqe.291
  30. Karim, K.R. and Yamazaki, F. (2007), "Effect of isolation on fragility curves of highway bridges based on simplified approach", Soil Dyn. Earthq. Eng., 27(5), 414-426. https://doi.org/10.1016/j.soildyn.2006.10.006
  31. Kelly, J.M. and Naeim, F. (1999), Design of seismic isolated structures, John Wiley & Sons, N.Y.
  32. Luco, N. (2002), Probabilistic seismic demand analysis, SMRF connection fractures, and near-source effects, Ph.D. Dissertation, Dept. of Civil and Environmental Engineering, Stanford University, California.
  33. Mackie, K. and Stojadinovic, B. (2003), Seismic demands for performance-based design of bridges, Report 2003/16, Pacific Earthquake Engineering Research Center, University of California, Berkeley, C.A.
  34. McKenna, F., Fenves, G.L. and Scott, M.H. (2003), Open system for earthquake engineering simulation , Pacific Earthquake Engineering Research Center, Univ. of California, Berkeley, C.A.
  35. Melchers, R.E. (1999), Structural reliability analysis and prediction, 2nd Ed., John Wiley and Sons, Chichester, England.
  36. Pandey, M.D. (1998), "An effective approximation to evaluate multinormal integrals", Struct. Saf., 20(1), 51-67. https://doi.org/10.1016/S0167-4730(97)00023-4
  37. PEER (The Pacific Earthquake Engineering Research Center). (2009), PEER strong ground motion database, (Jan. 4, 2009).
  38. Priestley, M.J.N., Seible F. and Calvi, G.M. (1996), Seismic design and retrofit of bridges, John Wiley and Sons, N.Y.
  39. Qiang, H., Xiuli, d., Jingbo, L., Zhongxian, L., Liyun, L. and Jianfeng, Z. (2009), "Seismic damage of highway bridges during 2008 Wenchuan earthquake", Earthq. Eng. Eng. Vib., 8(2), 263-273. https://doi.org/10.1007/s11803-009-8162-0
  40. Rao, C.R. and Toutenburg, H. (1997), Linear models, least squares and alternatives, Springer, New York.
  41. Rossi, P.E., Allenby, G.M. and McCulloch, R. (2005), Bayesian statistics and marketing, John Wiley and Sons, N.Y.
  42. Royset, J.O., Der Kiureghian, A. and Polak, E. (2001), "Reliability-based optimal design of series structural systems", J. Eng. Mech., 127(6), 607-614. https://doi.org/10.1061/(ASCE)0733-9399(2001)127:6(607)
  43. Ryan, K.L., Kelly, J.M. and Chopra, A.K. (2005), "Nonlinear model for lead-rubber bearings including axial-load effects", J. Eng. Mech.-ASCE, 131(12), 1270-1278. https://doi.org/10.1061/(ASCE)0733-9399(2005)131:12(1270)
  44. Sacks, J., Welch, W.J., Mitchell, T.J. and Wynn, H.P. (1989), "Design and analysis of computer experiments", Statistic. Sci., 4(4), 409-423. https://doi.org/10.1214/ss/1177012413
  45. Sheather, S.J. (2008), A modern approach to regression with R, Springer, New York, N.Y.
  46. Shinozuka, M., Feng, M.Q., Kim, H., Uzawa, T. and Ueda, T. (2001), Statistical analysis of fragility curves, Report MCEER2001, Department of Civil and Environmental Engineering, University of Southern California, Los Angeles, C.A.
  47. Shome, N. and Cornell, C.A. (1999), Probabilistic seismic demand analysis of nonlinear structures, Report RMS-35, Department of Civil Engineering, Stanford Univ., Stanford, C.A.
  48. Watson-Lamprey, J. and Abrahamson, N. (2006), "Selection of ground motion time series and limits on scaling", Soil Dyn. Earthq. Eng., 26, 477-482. https://doi.org/10.1016/j.soildyn.2005.07.001
  49. Weisberg, S. (2005), Applied linear regression, 3rd Ed., John Wiley and Sons, Hoboken, N.J.
  50. Wen, Y.K., Ellingwood, B.R. and Bracci, J.M. (2004), Vulnerability function framework for con-sequence-based engineering, Report DS-4, Mid-America Earthquake Center, Univ. of Illinois, Urbana-Champaign, I.L.
  51. Wilde, K., Gardoni, P. and Fujino, Y. (2000), "Base isolation system with shape memory alloy device for elevated highway bridges", Eng. Struct., 22(3), 222-229. https://doi.org/10.1016/S0141-0296(98)00097-2
  52. Zhong, J., Gardoni, P., Rosowsky, D. and Haukaas, T. (2008), "Probabilistic seismic demand models and fragility estimates for reinforced concrete bridges with two-column bents", J. Eng. Mech.-ASCE, 134(6), 495-504. https://doi.org/10.1061/(ASCE)0733-9399(2008)134:6(495)

피인용 문헌

  1. Adaptive Reliability Analysis of Reinforced Concrete Bridges Subject to Seismic Loading Using Nondestructive Testing vol.1, pp.4, 2015, https://doi.org/10.1061/AJRUA6.0000835