DOI QR코드

DOI QR Code

Optimization of a sandwich beam design: analytical and numerical solutions

  • Awad, Ziad K. (Civil Engineering Department, College of Engineering, University of Mosul)
  • 투고 : 2013.04.03
  • 심사 : 2013.10.02
  • 발행 : 2013.10.10

초록

An optimization work was developed in this work to provide design information for sandwich beam in civil engineering applications. This research is motivated by the wide-range applications of sandwich structures such as; slab, beam, girder, and railway sleeper. The design of a sandwich beam was conducted by using analytical and numerical optimization. Both analytical and numerical procedures consider the optimum design with structure mass objective minimization. Allowable deflection was considered as design constraints. It was found that the optimized core to the skins mass ratio is affected by the skin to core density and elastic modulus ratios. Finally, the optimum core to skin mass ratio cannot be constant for different skin and core materials.

키워드

참고문헌

  1. Allen, H.G. (1969), Analysis and design of structural sandwich panels, Pergamon Press Oxeford, England.
  2. Araujo, A., Martins, P., Mota Soares, C., Mota Soares, C. and Herskovits, J. (2009), "Damping optimization of viscoelastic laminated sandwich composite structures", Structural and Multidisciplinary Optimization, 39(6), 569-579. https://doi.org/10.1007/s00158-009-0390-4
  3. Ashby, M. (2000), "Multi-objective optimization in material design and selection", Acta Materialia, 48(1), 359-370. https://doi.org/10.1016/S1359-6454(99)00304-3
  4. Awad, Z.K., Aravinthan, T. and Manalo, A. (2012), "Geometry effect on the behaviour of single and glue-laminated glass fibre reinforced polymer composite sandwich beams loaded in four-point bending", Materials & Design, 39(0), 93-103. https://doi.org/10.1016/j.matdes.2012.02.023
  5. Awad, Z.K., Aravinthan, T., Zhuge, Y. and Gonzalez, F. (2012), "A review of optimization techniques used in the design of fibre composite structures for civil engineering applications", Materials & Design, 33(1), 534-544. https://doi.org/10.1016/j.matdes.2011.04.061
  6. Awad, Z.K., Gonzalez, F. and Aravinthan, T. (2010), "Advanced robust design optimization of FRP sandwich floor panels", IOP Conference Series: Materials Science and Engineering, 10(1), 1-9.
  7. Awad, Z.K. and Yusaf, T. (2012), "Fibre composite railway sleeper design by using FE approach and optimization techniques", Structural Engineering and Mechanics, 41(2), 231-242. https://doi.org/10.12989/sem.2012.41.2.231
  8. Falzon, B.G. and Faggiani, A. (2012), "The use of a genetic algorithm to improve the postbuckling strength of stiffened composite panels susceptible to secondary instabilities", Composite Structures, 94(3), 883-895. https://doi.org/10.1016/j.compstruct.2011.10.015
  9. Froud, G. (1980), "Your sandwich order, sir(mechanical properties in bending of sandwich structures) ", Composites, 11, 133-138. https://doi.org/10.1016/0010-4361(80)90005-1
  10. Gibson, L. (1984), "Optimization of stiffness in sandwich beams with rigid foam cores", Materials Science and Engineering, 67(2), 125-135. https://doi.org/10.1016/0025-5416(84)90043-0
  11. Hollaway, L.C. and Head, P.R. (1999), Composite materials and structures in civil engineering, Elsevier, Oxford.
  12. Hudson, C.W., Carruthers, J.J. and Robinson, A.M. (2010), "Multiple objective optimisation of composite sandwich structures for rail vehicle floor panels", Composite Structures, 92(9), 2077-2082. https://doi.org/10.1016/j.compstruct.2009.10.018
  13. Li, X., Li, G., Wang, C.H. and You, M. (2011), "Optimum Design of Composite Sandwich Structures Subjected to Combined Torsion and Bending Loads", Applied Composite Materials, 1-17.
  14. Meidell, A. (2009), "Minimum weight design of sandwich beams with honeycomb core of arbitrary density", Composites Part B: Engineering, 40(4), 284-291. https://doi.org/10.1016/j.compositesb.2009.01.003
  15. Murthy, O., Munirudrappa, N., Srikanth, L. and Rao, R. (2006), "Strength and stiffness optimization studies on honeycomb core sandwich panels", Journal of Reinforced Plastics and Composites, 25(6), 663. https://doi.org/10.1177/0731684406058288
  16. Simoes, L.M.C. and Negrao, J.H.O. (2005), "Reliability-based optimum design of glulam cable-stayed footbridges", Journal of Bridge Engineering, 10(1), 39-44. https://doi.org/10.1061/(ASCE)1084-0702(2005)10:1(39)
  17. Swanson, S.R. and Kim, J. (2002), "Optimization of sandwich beams for concentrated loads", Journal of Sandwich Structures and Materials, 4(3), 273-293. https://doi.org/10.1177/1099636202004003139
  18. Theulen, J. and Peijs, A. (1991), "Optimization of the bending stiffness and strength of composite sandwich panels", Composite Structures, 17(1), 87-92. https://doi.org/10.1016/0263-8223(91)90062-4
  19. Walker, M. and Smith, R.E. (2003), "A technique for the multiobjective optimisation of laminated composite structures using genetic algorithms and finite element analysis", Composite Structures, 62(1), 123-128. https://doi.org/10.1016/S0263-8223(03)00098-9

피인용 문헌

  1. Use of design optimization techniques in solving typical structural engineering related design optimization problems vol.55, pp.6, 2015, https://doi.org/10.12989/sem.2015.55.6.1121
  2. Experimental study of anisotropic behavior of PU foam used in sandwich panels vol.20, pp.1, 2016, https://doi.org/10.12989/scs.2016.20.1.043
  3. Optimal dimensioning for the corner combined footings vol.2, pp.2, 2013, https://doi.org/10.12989/acd.2017.2.2.169
  4. Modeling for the strap combined footings Part I: Optimal dimensioning vol.30, pp.2, 2013, https://doi.org/10.12989/scs.2019.30.2.097
  5. Effect of Foam’s Heterogeneity on the Behaviour of Sandwich Panels vol.29, pp.4, 2019, https://doi.org/10.2478/ceer-2019-0047