Structural Engineering and Mechanics

  • 제48권1호
  • /
  • Pages.41-56
  • /
  • 2013
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Prediction of through the width delamination growth in post-buckled laminates under fatigue loading using de-cohesive law

  • Hosseini-Toudeshky, Hossein (Department of Aerospace Engineering, Amirkabir University of Technology) ;
  • Goodarzi, M. Saeed (Department of Aerospace Engineering, Amirkabir University of Technology) ;
  • Mohammadi, Bijan (School of Mechanical Engineering, Iran University of Science and Technology)
  • 투고 : 2013.06.17
  • 심사 : 2013.09.18
  • 발행 : 2013.10.10
⟨ 이전 논문 다음 논문 ⟩

초록

Initiation and growth of delamination is a great concern of designers of composite structures. Interface elements with de-cohesive constitutive law in the content of continuum damage mechanics can be used to predict initiation and growth of delamination in single and mixed mode conditions. In this paper, an interface element based on the cohesive zone method has been developed to simulate delaminatoin growth of post-buckled laminate under fatigue loading. The model was programmed as the user element and user material by the "User Programmable Features" in ANSYS finite element software. The interface element is a three-dimensional 20 node brick with small thickness. Because of mixed-mode condition of stress field at the delamination-front of post-buckled laminates, a mixed-mode bilinear constitutive law has been used as user material in this model. The constitutive law of interface element has been verified by modelling of a single element. A composite laminate with initial delamination under quasi-static compressive Loading available from literature has been remodeled with the present approach. Moreover, it will be shown that, the closer the delamination to the free surface of laminate, the slower the delamination growth under compressive fatigue loading. The effects of laminate configuration on delamination growth are also investigated.

키워드

참고문헌

  1. Asp, L., Sjoogren, A. and Greenhalgh, E. (2001), "Delamination growth and thresholds in a carbon/epoxy composite under fatigue loading", J. Compos. Techol. Res., 23, 55-68. https://doi.org/10.1520/CTR10914J
  2. Benzeggagh, M. and Kenane, M. (1996), "Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus", J. Compos. Sci. Techol., 56, 439-49. https://doi.org/10.1016/0266-3538(96)00005-X
  3. Blanco, N., Gamstedt, E., Asp, L. and Costa, J. (2005), "Mixed-mode delamination growth in carbon-fibre composite laminates under cyclic loading", Int. J. Solids. Struct., 41, 4219-4235.
  4. Camanho, P. and Davila, C. (2002), "Mixed-mode de-cohesion finite elements for the simulation of delamination in composite materials", NASA Report-No. TM-2002-211737.
  5. Falk, M., Needleman, A. and Rice, J. (2001), "A critical evaluation of cohesive zone models of dynamic fracture", J. de Physique IV, Proceedings, 543-550.
  6. Griffith, A. (1921), "The phenomena of rupture and flow in solids", Philosophical Transactions of the Royal Society of London, 221, 163-198. https://doi.org/10.1098/rsta.1921.0006
  7. Hosseini-Toudeshky, H., Hosseini, S. and Mohammadi, B. (2010a), "Progressive delamination growth analysis using discontinuous layered element", J. Compos. Struct., 92, 883-890. https://doi.org/10.1016/j.compstruct.2009.09.028
  8. Hosseini-Toudeshky, H., Hosseini, S. and Mohammadi, B. (2010b), "Delamination buckling growth in laminated composites using layer-wise interface element", J. Compos. Struct. , 92, 1846-1856. https://doi.org/10.1016/j.compstruct.2010.01.013
  9. Hosseini-Toudeshky, H., Hosseini, S. and Mohammadi, B. (2010c), "Buckling and Delamination Growth Analysis of Composite Laminates Containing Embedded Delaminations", Appl. Compos. Mater., 17, 95-109. https://doi.org/10.1007/s10443-009-9092-8
  10. Hosseini-Toudeshky, H., Jasemzadeh, A. and Mohammadi, B. (2011), "FatigueDebonding Analysis of Repaired Aluminium Panels by Composite Patch using Interface Elements", Appl. Compos. Mater., 18, 571-584. https://doi.org/10.1007/s10443-011-9229-4
  11. Juntti, M., Asp, L. and Olsson, R. (1999), "Assessment of evaluation methods for the mixed-mode bending test", J. Comp. Technol. Res., 21, 37-48. https://doi.org/10.1520/CTR10611J
  12. Kardomateas, G., Pelegry, A. and Malik, A. (1995), "Growth of Internal Delamination under Cyclic Compression in Composite Plates", J. Mech. Phys. Solids, 43(6), 847-868. https://doi.org/10.1016/0022-5096(95)00012-8
  13. Krueger, R. (2002), "The virtual crack closure technique: history, approach and applications", NASA CR-2002-211628.
  14. Mi, U., Crisfield, M. and Davies, G. (1998), "Progressive delamination using interface elements", J. Compos. Mater., 32, 1246-1272. https://doi.org/10.1177/002199839803201401
  15. Rice, J.R., Dziewonski, A.M. and Boschi, E. (1980), P"hysics of the Earth's Interior, the mechanics of earthquake rupture", Proceedings of the International School of Physics, Italian Physical Society, Course LXXVIII, Varenna, Italy.
  16. Robinson, P., Galvanetto, U., Tumino, D. and Bellucci, G. (2005), "Numerical Simulation of Fatigue-driven Delamination using Interface Elements", Int. J. Numer. Meth. Eng., 63, 1824-1848. https://doi.org/10.1002/nme.1338
  17. Rybicki, E. and Kanninen, M. (1977), "A finite element calculation of stress intensity factors by a modified crack closure integral", J. Eng. Fract. Mech., 9,931-938. https://doi.org/10.1016/0013-7944(77)90013-3
  18. Turon, A., Costa, J., Camanho, P. and Davila, C. (2007a), "Simulation of delamination in composites under high-cycle fatigue", Compo. Part A: Appl. Sci. Manuf., 38(11), 2270-2282. https://doi.org/10.1016/j.compositesa.2006.11.009
  19. Turon, A., Davila, C., Camanho, P. and Costa, J. (2007b), "An engineering solution for solving mesh size effects in the simulation of delamination with cohesive zone models", J. Eng. Fract. Mech., 74(10), 1665-1682. https://doi.org/10.1016/j.engfracmech.2006.08.025
  20. Wagner, W. and Balzani, C. (2008), "An Interface Element for the Simulation of Delamination in Unidirectional Fiber-reinforced Composite Laminates", J Eng. Fract. Mech., 75, 2597-2615. https://doi.org/10.1016/j.engfracmech.2007.03.013
  21. Ye, L. (1988), "Role of matrix resin in delamination onset and growth in composite laminates", J. Compos Sci. Technol., 33, 257-277. https://doi.org/10.1016/0266-3538(88)90043-7
  22. Zhang, Y. and Wang, S. (2009a), "Buckling, post-buckling and delamination propagation in debonded composite laminates part1: theoretical development", J. Compos. Struct., 88, 121-130. https://doi.org/10.1016/j.compstruct.2008.02.013
  23. Zhang, Y. and Wang, S. (2009b), "Buckling post-buckling and delamination propagation in debonded composite laminates part2: numerical application", J. Compos. Struct., 88, 131-146. https://doi.org/10.1016/j.compstruct.2008.02.012

피인용 문헌

  1. Progressive debonding analysis of composite blade root joint of wind turbines under fatigue loading vol.120, 2015, https://doi.org/10.1016/j.compstruct.2014.10.025
  2. In-situ fatigue life prognosis for composite laminates based on stiffness degradation vol.132, 2015, https://doi.org/10.1016/j.compstruct.2015.05.006
  3. Delamination growth analysis in composite laminates subjected to low velocity impact vol.17, pp.4, 2014, https://doi.org/10.12989/scs.2014.17.4.387
  4. Viscoelastic-damage interface model formulation with friction to simulate the delamination growth in mode II shear vol.21, pp.4, 2017, https://doi.org/10.1007/s11043-017-9341-4
  5. Low-cycle fatigue delamination initiation and propagation in fibre metal laminates vol.38, pp.6, 2015, https://doi.org/10.1111/ffe.12254
  6. Modified DEBA for determining size dependent shear fracture energy of laminates vol.28, pp.1, 2018, https://doi.org/10.12989/scs.2018.28.1.111