Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Investigation of shear transfer mechanisms in repaired damaged concrete columns strengthened with RC jackets

  • Achillopoulou, D.V (Reinforced Concrete Laboratory, Civil Engineering Department, Polytechnic School, Democritus University of Thrace) ;
  • Karabinis, A.I (Reinforced Concrete Laboratory, Civil Engineering Department, Polytechnic School, Democritus University of Thrace)
  • Received : 2012.12.20
  • Accepted : 2013.07.31
  • Published : 2013.08.25
⟨ Previous Next ⟩

Abstract

The study presents the results of an experimental program concerning the shear force transfer between reinforced concrete (RC) jackets and existing columns with damages. In order to investigate the effectiveness of the repair method applied and the contribution of each shear transfer mechanism of the interface. It includes 22 concrete columns (core) (of 24,37MPa concrete strength) with square section (150mm side, 500 mm height and scale 1:2). Ten columns had initial construction damages and twelve were subjected to initial axial load. Sixteen columns have full jacketing at all four faces with 80mm thickness (of 31,7MPa concrete strength) and contain longitudinal bars (of 500MPa nominal strength) and closed stirrups spaced at 25mm, 50mm or 100mm (of 220MPa nominal strength). Fourteen of them contain dowels at the interface between old and new concrete. All columns were subjected to repeated (pseudo-seismic) axial compression with increasing deformation cycles up to failure with or without jacketing. Two load patterns were selected to examine the difference of the behavior of columns. The effects of the initial damages, of the reinforcement of the interface (dowels) and of the confinement generated by the stirrups are investigated through axial- deformation (slip) diagrams and the energy absorbed diagrams. The results indicate that the initial damages affect the total behavior of the column and the capacity of the interface to shear mechanisms and to slip: a) the maximum bearing load of old column is decreased affecting at the same time the loading capacity of the jacketed element, b) suitable repair of initially damaged specimens increases the capacity of the jacketed column to transfer load through the interface.

Keywords

References

  1. Fardis, M.N. (2009), Seismic Design, assessment and retrofitting of concrete buildings, based on EN-Eurocode 8, Geotechnical, geological and earthquake engineering, Springer.
  2. Julio, N.B.E., Branco, A.B.F. and Silve, D.V. (2005), "Reinforced concrete jacketing- interface influence on monotonic loading response", ACI Structural Journal, 102(2), 252-257.
  3. Haskett, M., Oehlers, D.J., Mohamed Ali, M.S. and Sharma, S.K. (2011), "Evaluating the shear-friction resistance across sliding planes in concrete", Engineering Structures, 33(4), 1357-1364. https://doi.org/10.1016/j.engstruct.2011.01.013
  4. Ince, R., Yalcin, E. and Arslan, A. (2007), "Size-dependent response of dowel action in R.C. members", Engineering Structures, 29(6), 955-961. https://doi.org/10.1016/j.engstruct.2006.07.006
  5. Sim, J.I., Yang, K.H. and Jeon, J.K. (2013), "Influence of aggregate size on the compressive size effect according to different concrete types", Construction and Building Materials, 44, 716-725. https://doi.org/10.1016/j.conbuildmat.2013.03.066
  6. Xiao, J.Z., Xie, H. and Yang, J.Z. (2012), "Shear transfer across a crack in recycled aggregate concrete", Cement and Concrete Research, 42(5), 700-709. https://doi.org/10.1016/j.cemconres.2012.02.006
  7. Spathis, Α.L., Bousias, Ν.Ε. and Fardis, Ν.Μ. (2006), "Tests of reinforced concrete columns retrofitted with reinfirced concrete or FRP jackets", 15th Concrete Conference ,Technical Chamber of Greece, Alexandroupolis. (in Greek)
  8. Vandoros, G.K. and Dritsos, E.S. (2006a), "Concrete jacket construction detail effectiveness when strengthening RC columns", Constructona and Building Materials, 22, 264-276.
  9. Vandoros, G.K. and Dritsos, E.S. (2006b), "Axial preloading effects when reinforced concrete columns are strengthened by concrete jackets", Prog. Structural Eng. Mater., 79-92.
  10. Thermou, G.E., Papanikolaou, V.K. and Kappos, A.J. (2011), "Analytical model for predicting the response of old type columns rehabilitated with concrete jacketing under reversed cyclic loading", COMPDYN 2011 III ECCOMAS, Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering Corfu, Greece.
  11. International Federation for Structural Concrete (2010), "First Complete Draft", fib-Model Code 2010, bulletin 55.
  12. American Concrete Institute (2008), "Building Code Requirements for Structural Concrete (ACI 318-08) and Commentary", ACI -318R-08 Building Code.
  13. European Standard EN (2005), "Eurocode 8 design of structures for earthquake resistance, Part 3: Assessment and retrofitting of buildings".
  14. Organisation of Seismic Design and Protection (2012), "Greek Retrofit Code". (in Greek)
  15. Achillopoulou, D.V., Rousakis, T.C. and Karabinis, I.A. (2012), "Force transfer between existing concrete columns with reinforced concrete jackets subjected to pseudoseismic axial loading", Proceeding of 15th WCEE, Lisbon.

Cited by

  1. Behaviour of rehabilitated RC beams with self-compacting concrete jacketing – Analytical model and test results vol.55, 2014, https://doi.org/10.1016/j.conbuildmat.2014.01.031
  2. Repaired concrete columns with fiber reinforced thixotropic mortar: experimental & FEA approach vol.15, pp.1, 2015, https://doi.org/10.12989/cac.2015.15.1.073
  3. Axial Behaviour of Glass Fibre Reinforced Polymer-Confined Reinforced Concrete Short Columns vol.28, pp.1, 2018, https://doi.org/10.1080/10168664.2018.1431422
  4. Assessment of concrete columns repaired with fiber reinforced mortar through damage indexes and numerical model vol.81, 2015, https://doi.org/10.1016/j.conbuildmat.2015.02.044
  5. Investigation of load transfer along interfaces of jacketed square columns vol.63, pp.3, 2013, https://doi.org/10.12989/sem.2017.63.3.293
  6. Repair of Heavily Damaged RC Beams Failing in Shear Using U-Shaped Mortar Jackets vol.9, pp.6, 2019, https://doi.org/10.3390/buildings9060146
  7. Shear behavior of shallow-wide beams strengthened by external SHCC jacket vol.16, pp.1, 2020, https://doi.org/10.1080/16874048.2020.1796083
  8. Experimental Study on Interfacial Shear Performance of RC Beams Added to Existing RC Columns vol.24, pp.11, 2013, https://doi.org/10.1007/s12205-020-2362-6