DOI QR코드

DOI QR Code

Analysis of multi leaf spring based on contact mechanics - a novel approach

  • Kumaravelan, R. (Department of Mechanical Engineering, Velalar College of Engineering and Technology) ;
  • Ramesh, S. (Department of Mechanical Engineering, Annai Mathammal Sheela Engineering College) ;
  • Gandhi, V.C. Sathish (Department of Mechanical Engineering, University College of Engineering Nagercoil, Anna University) ;
  • Agu, M. Joemax (Department of Mechanical Engineering, CSI Institute of Technology) ;
  • Thanmanaselvi, M. (Department of Civil Engineering, University College of Engineering Nagercoil, Anna University)
  • 투고 : 2013.04.17
  • 심사 : 2013.08.07
  • 발행 : 2013.08.10

초록

A leaf spring, especially the longitudinal type is liable and persistent element in automotive suspension system. In the present scenario the composite materials are widely used in the automobile industries has shown a great interest in the replacement of steel spring due to high strength by weight ratio. Previous investigations focused on stresses and displacement analysis of single leaf spring for different materials. The present work aims to design and analysis of leaf spring for two different cases by considering the Young's modulus to yield strength ratio. In the first case the analysis deals with the design and analysis of a single cantilever solid triangle beam which is an equivalent beam of a spring with three leaves having uniform strength. In the second case a 3-beams of rectangular cross section has been considered which is equivalent to a spring with three leaves. The analysis was carried out based on contact mechanics approach. The results were compared, that the fiberglass composite leaf spring is suitable for high loading capacity, reliability and efficiency.

키워드

참고문헌

  1. Al-Qureshi, H.A. (2001), "Automobile leaf springs from composite materials", Journal of Material Processing Technology, 118, 58-61. https://doi.org/10.1016/S0924-0136(01)00863-9
  2. Beardmore, P. (1986), "Composite structures for automobiles", Composite structures, 5,163-76.
  3. Daugherty, R.L. (1981), "Composite leaf springs in heavy truck applications", Composite Materials, Proceedings of Japan - US Conference, Tokyo.
  4. Hou, J.P., Cherruault, J.Y., Nairne, I., Jeronimidis, G. and Mayer, R.M. (2007), "Evaluation of the eye-end design of a composite leaf spring for heavy axle loads", Composite Structures, 78, 351-358. https://doi.org/10.1016/j.compstruct.2005.10.008
  5. Mahdi, E. (2006), "Light composite elliptic springs for vehicle suspension", Composite Structures, 75, 24-28. https://doi.org/10.1016/j.compstruct.2006.04.082
  6. Peijs, A.A.J.M. and De Kok, J.M.M. (1993), "Hybrid composites based on polyethylene and carbon fibers, 6. Tensile and fatigue behaviour ", Composites, 24(1), 19-32. https://doi.org/10.1016/0010-4361(93)90260-F
  7. Rajendran, I. and Vijayarangan, S. (2001), "Optimal design of composite leaf spring using genetic algorithms", Computers and Structures, 79, 1121-1129. https://doi.org/10.1016/S0045-7949(00)00174-7
  8. Sancaktar, E. and Gratton, M. (1999), "Design, analysis, and optimization of composite leaf springs for light vehicle applications", Composite Structures, 44, 195-204. https://doi.org/10.1016/S0263-8223(98)00136-6
  9. Shiva Shankar, G.S. and Vijayarangan, S. (2006), "Mono composite leaf spring for light weight vehicledesign, end joint analysis and testing", Materials Science (Medziagotyra), 12(3), 220-225.
  10. Shokrieh, M.M. and Rezaei, D. (2003), "Analysis and optimization of a composite leaf spring", Composite Structures, 60, 317-325. https://doi.org/10.1016/S0263-8223(02)00349-5
  11. Subramanian, C. and Senthilvelan, S. (2010), "Effect of reinforced fiber length on the joint performance of thermoplastic leaf spring", Materials and Design, 31, 3733-3741. https://doi.org/10.1016/j.matdes.2010.03.014
  12. Talib, A.R.A., Ali, A., Goudah, G., Lah, N.A.C. and Golestaneh, A.F. (2010), "Developing a composite based elliptic spring for automotive applications", Materials and Design, 31, 475-484. https://doi.org/10.1016/j.matdes.2009.06.041
  13. Yu, W.J. and Kim, H.C. (1988), "Double tapered FRP beam for automotive?suspension leaf spring",Composite Structures, 9, 279-300. https://doi.org/10.1016/0263-8223(88)90049-9

피인용 문헌

  1. Analysis of material dependency in an elastic - plastic contact models using contact mechanics approach vol.53, pp.5, 2015, https://doi.org/10.12989/sem.2015.53.5.1051
  2. Performance analysis of spherical indentation process during loading and unloading - a contact mechanics approach vol.52, pp.3, 2014, https://doi.org/10.12989/sem.2014.52.3.469