DOI QR코드

DOI QR Code

Online estimation of noise parameters for Kalman filter

  • Yuen, Ka-Veng (Department of Civil and Environmental Engineering, Faculty of Science and Technology, University of Macau) ;
  • Liang, Peng-Fei (Department of Civil and Environmental Engineering, Faculty of Science and Technology, University of Macau) ;
  • Kuok, Sin-Chi (Department of Civil and Environmental Engineering, Faculty of Science and Technology, University of Macau)
  • 투고 : 2013.04.15
  • 심사 : 2013.07.30
  • 발행 : 2013.08.10

초록

A Bayesian probabilistic method is proposed for online estimation of the process noise and measurement noise parameters for Kalman filter. Kalman filter is a well-known recursive algorithm for state estimation of dynamical systems. In this algorithm, it is required to prescribe the covariance matrices of the process noise and measurement noise. However, inappropriate choice of these covariance matrices substantially deteriorates the performance of the Kalman filter. In this paper, a probabilistic method is proposed for online estimation of the noise parameters which govern the noise covariance matrices. The proposed Bayesian method not only estimates the optimal noise parameters but also quantifies the associated estimation uncertainty in an online manner. By utilizing the estimated noise parameters, reliable state estimation can be accomplished. Moreover, the proposed method does not assume any stationarity condition of the process noise and/or measurement noise. By removing the stationarity constraint, the proposed method enhances the applicability of the state estimation algorithm for nonstationary circumstances generally encountered in practice. To illustrate the efficacy and efficiency of the proposed method, examples using a fifty-story building with different stationarity scenarios of the process noise and measurement noise are presented.

키워드

참고문헌

  1. Beck, J.L. (2010), "Bayesian system identification based on probability logic", Struct. Control Hlth., 17(7), 825-847. https://doi.org/10.1002/stc.424
  2. Beck, J.L. and Katafygiotis, L.S. (1998), "Updating models and their uncertainties, I: Bayesian statistical framework", J. Eng. Mech.-ASCE, 124(4), 455-461. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:4(455)
  3. Beck, J.L. and Yuen, K.V. (2004), "Model selection using response measurements: Bayesian probabilistic approach", J. Eng. Mech.-ASCE, 130(2), 192-203. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:2(192)
  4. Box, G.E.P. and Tiao, G.C. (1973), Bayesian Inference in Statistical Analysis, Addison-Wesley, Reading, MA.
  5. Ching, J., Beck, J.L. and Porter, K.A. (2006), "Bayesian state and parameter estimation of uncertain dynamical systems", Probabilist. Eng. Mech., 21(1), 81-96. https://doi.org/10.1016/j.probengmech.2005.08.003
  6. Ching, J., Porter, K.A. and Beck, J.L. (2009), "Propagating uncertainties for loss estimation in performancebased earthquake engineering using moment matching", Struct. Infrastruct. E., 5(3), 245-262. https://doi.org/10.1080/15732470701298323
  7. Chui, C.K. and Chen, G. (2009), Kalman Filtering with Real-Time Applications, 4th Edition, Springer-Verlag, New York.
  8. Grewal, M.S. and Andrews, A.P. (1993), Kalman Filtering: Theory and Practice, Prentice Hall, Englewood Cliffs, New Jersey.
  9. Hoi, K.I., Yuen, K.V. and Mok, K.M. (2008), "Kalman filter based prediction system for wintertime PM10 concentrations in Macau", Global NEST J., 10(2), 140-150.
  10. Kalman, R.E. (1960), "A new approach to linear filtering and prediction problems", J. Basic Eng.-T. ASME, 82(1), 35-45. https://doi.org/10.1115/1.3662552
  11. Koh, C.G. and See, L.M. (1994), "Identification and uncertainty estimation of structural parameters", J. Eng. Mech.-ASCE, 120(6), 1219-1236. https://doi.org/10.1061/(ASCE)0733-9399(1994)120:6(1219)
  12. Kuok, S.C. and Yuen, K.V. (2012), "Structural health monitoring of Canton tower using Bayesian framework", Smart Struct. Syst., 10(4-5), 375-391. https://doi.org/10.12989/sss.2012.10.4_5.375
  13. Lam, H.F., Yuen, K.V. and Beck, J.L. (2006), "Structural health monitoring via measured Ritz vectors utilizing artificial neural networks", Comput. Aided Civ. Inf., 21(4), 232-241. https://doi.org/10.1111/j.1467-8667.2006.00431.x
  14. Lee, M.H. and Chen, T.C. (2010), "Intelligent fuzzy weighted input estimation method for the input force on the plate structure", Struct. Eng. Mech., 34(1), 1-14. https://doi.org/10.12989/sem.2010.34.1.001
  15. Lei, Y. and Jiang, Y.Q. (2011), "A two-stage Kalman estimation approach for the identification of structural parameters under unknown inputs", Adv. Mat. Res., 243-249, 5394-5398. https://doi.org/10.4028/www.scientific.net/AMR.243-249.5394
  16. Lin, J.W., Chen, C.W. and Hsu, T.C. (2013), "A novel regression prediction model for structural engineering applications", Struct. Eng. Mech., 45(5), 693-702. https://doi.org/10.12989/sem.2013.45.5.693
  17. Mehra, R.K. (1970), "On the identification of variance and adaptive Kalman filtering", IEEE T. Automat. Contr., 15(2), 175-184. https://doi.org/10.1109/TAC.1970.1099422
  18. Mohamed, A.H. and Schwarz, K.P. (1999), "Adaptive Kalman filtering for INS/GPS", J. Geodesy, 73, 193-203. https://doi.org/10.1007/s001900050236
  19. Ni, Y.Q., Ko, J.M., Hua, X.G. and Zhou, H.F. (2007), "Variability of measured modal frequencies of a cablestayed bridge under different wind conditions", Smart Struct. Syst., 3(3), 341-356. https://doi.org/10.12989/sss.2007.3.3.341
  20. Odelson, B.J., Rajamani, M.R. and Rawlings, J.B. (2006), "A new autocovariance least-squares method for estimating noise covariances", Automatica, 42(2), 303-308. https://doi.org/10.1016/j.automatica.2005.09.006
  21. Papadimitriou, C., Beck, J.L. and Au, S.K. (2000), "Entropy-based optimal sensor location for structural model updating", J. Vib. Control, 6(5), 781-800. https://doi.org/10.1177/107754630000600508
  22. Papadimitriou, C., Fritzen, C.P., Kraemer, P. and Ntotsios, E. (2011), "Fatigue predictions in entire body of metallic structures from a limited number of vibration sensors using Kalman filtering", Struct. Control Hlth., 18(5), 554-573. https://doi.org/10.1002/stc.395
  23. Rosa, L., Tomasini, G., Zasso, A. and Aly, A.M. (2012), "Wind-induced dynamics and loads in a prismatic slender building: modal approach based on unsteady pressure measures", J. Wind Eng. Ind. Aerod., 107-108, 118-130. https://doi.org/10.1016/j.jweia.2012.03.034
  24. Sangsuk-Iam, S. and Bullock, T.E. (1990), "Analysis of discrete time Kalman filtering under incorrect noise covariances", IEEE T. Automat. Contr., 35(12), 1304-1309. https://doi.org/10.1109/9.61006
  25. Schmidt, S.F. (1981), "The Kalman filter: Its recognition and development for aerospace applications", J. Guid. Control Dynam., 4(1), 4-7. https://doi.org/10.2514/3.19713
  26. Simiu, E. and Scanlan, R.H. (1996), Wind Effects on Structures, Fundamentals and Applications to Design, 3rd Edition, John Wiley & Sons.
  27. Sorensen, S.W. and Sacks, J.E. (1971), "Recursive fading memory filters", Inform. Sciences, 3(2), 101-119. https://doi.org/10.1016/S0020-0255(71)80001-4
  28. Taranath, B.S. (2005), Wind and Earthquake Resistant Buildings: Structural Analysis and Design, New York, Marcel Dekker.
  29. Yan, W.M., Yuen, K.V. and Yoon, G.L. (2009), "Bayesian probabilistic approach for correlations of compressibility index for marine clays", J. Geotech. Geoenviron., 135(12), 1932-1940. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000157
  30. Yang, J.N., Lei, Y., Lin, S. and Huang, N. (2004), "Identification of natural frequencies and dampings of in situ tall buildings using ambient wind vibration data", J. Eng. Mech.-ASCE, 130(5), 570-577. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:5(570)
  31. Yuen, K.V. (2010), Bayesian Methods for Structural Dynamics and Civil Engineering, John Wiley and Sons, New York.
  32. Yuen, K.V., Hoi, K.I. and Mok, K.M. (2007), "Selection of noise parameters for Kalman filter", Earthq. Eng. Eng. Vib., 6(1), 49-56. https://doi.org/10.1007/s11803-007-0659-9
  33. Yuen, K.V. and Katafygiotis, L.S. (2001), "Bayesian time-domain approach for modal updating using ambient data", Probabilist. Eng. Mech., 16(3), 219-231. https://doi.org/10.1016/S0266-8920(01)00004-2
  34. Yuen, K.V. and Katafygiotis, L.S. (2005a), "An efficient simulation method for reliability analysis using simple additive rules of probability", Probabilist. Eng. Mech., 20(1), 109-114. https://doi.org/10.1016/j.probengmech.2004.07.003
  35. Yuen, K.V. and Katafygiotis, L.S. (2005b), "Model updating using noisy response measurements without knowledge of the input spectrum", Earthq. Eng. Struct. Dyn., 34(2), 167-187. https://doi.org/10.1002/eqe.415
  36. Yuen, K.V. and Kuok, S.C. (2010), "Ambient interference in long-term monitoring of buildings", Eng. Struct., 32(8), 2379-2386. https://doi.org/10.1016/j.engstruct.2010.04.012
  37. Yuen, K.V. and Kuok, S.C. (2011), "Bayesian methods for updating dynamic models", Appl. Mech. Rev., 64(1), 010802-1-010802-18. https://doi.org/10.1115/1.4004479
  38. Yuen, K.V. and Mu, H.Q. (2012), "A novel probabilistic method for robust parametric identification and outlier detection", Probabilist. Eng. Mech., 30, 48-59. https://doi.org/10.1016/j.probengmech.2012.06.002
  39. Yun, C.B., Abdelrahman, A.M. and Wang, P.C. (1979), "Along-wind gust effect on elevated structures", Eng. Struct., 1(3), 121-124. https://doi.org/10.1016/0141-0296(79)90021-X

피인용 문헌

  1. A Computationally Efficient Algorithm for Real-Time Tracking the Abrupt Stiffness Degradations of Structural Elements vol.31, pp.6, 2016, https://doi.org/10.1111/mice.12217
  2. Structural Health Monitoring of a Reinforced Concrete Building during the Severe Typhoon Vicente in 2012 vol.2013, 2013, https://doi.org/10.1155/2013/509350
  3. Progressive damage identification using dual extended Kalman filter vol.227, pp.8, 2016, https://doi.org/10.1007/s00707-016-1590-9
  4. Study of the attenuation relationship for the Wenchuan M s 8.0 earthquake vol.14, pp.1, 2015, https://doi.org/10.1007/s11803-015-0002-9
  5. Impact load identification for composite structures using Bayesian regularization and unscented Kalman filter vol.24, pp.5, 2017, https://doi.org/10.1002/stc.1910
  6. Real-Time System Identification: An Algorithm for Simultaneous Model Class Selection and Parametric Identification vol.30, pp.10, 2015, https://doi.org/10.1111/mice.12146
  7. Modal decomposition using multi-channel response measurements vol.37, 2014, https://doi.org/10.1016/j.probengmech.2014.06.003
  8. Damage Detection in Flexible Plates through Reduced-Order Modeling and Hybrid Particle-Kalman Filtering vol.16, pp.12, 2015, https://doi.org/10.3390/s16010002
  9. Probabilistic real-time updating for geotechnical properties evaluation vol.54, pp.2, 2015, https://doi.org/10.12989/sem.2015.54.2.363
  10. Online damage detection via a synergy of proper orthogonal decomposition and recursive Bayesian filters vol.89, pp.2, 2017, https://doi.org/10.1007/s11071-017-3530-1
  11. Detection and parametric identification of structural nonlinear restoring forces from partial measurements of structural responses vol.54, pp.2, 2015, https://doi.org/10.12989/sem.2015.54.2.291
  12. Stable Robust Extended Kalman Filter vol.30, pp.2, 2017, https://doi.org/10.1061/(ASCE)AS.1943-5525.0000665
  13. Multiresolution Bayesian nonparametric general regression for structural model updating vol.25, pp.2, 2018, https://doi.org/10.1002/stc.2077
  14. Remaining Useful Life Prediction and Uncertainty Quantification of Proton Exchange Membrane Fuel Cell Under Variable Load vol.63, pp.4, 2016, https://doi.org/10.1109/TIE.2016.2519328
  15. Predicting ground-level ozone concentrations by adaptive Bayesian model averaging of statistical seasonal models 2017, https://doi.org/10.1007/s00477-017-1473-1
  16. A two-stage and two-step algorithm for the identification of structural damage and unknown excitations: numerical and experimental studies vol.15, pp.1, 2015, https://doi.org/10.12989/sss.2015.15.1.057
  17. Investigation of modal identification and modal identifiability of a cable-stayed bridge with Bayesian framework vol.17, pp.3, 2016, https://doi.org/10.12989/sss.2016.17.3.445
  18. Data fusion based improved Kalman filter with unknown inputs and without collocated acceleration measurements vol.18, pp.3, 2016, https://doi.org/10.12989/sss.2016.18.3.375
  19. Novel nonparametric modeling of seismic attenuation and directivity relationship vol.311, 2016, https://doi.org/10.1016/j.cma.2016.09.004
  20. Online damage detection in structural systems via dynamic inverse analysis: A recursive Bayesian approach vol.159, 2018, https://doi.org/10.1016/j.engstruct.2017.12.031
  21. A dual Kalman filter approach for state estimation via output-only acceleration measurements vol.60-61, 2015, https://doi.org/10.1016/j.ymssp.2015.02.001
  22. Real-time substructural identification by boundary force modeling vol.25, pp.5, 2018, https://doi.org/10.1002/stc.2151
  23. Chaotic particle swarm optimization in optimal active control of shear buildings vol.61, pp.3, 2017, https://doi.org/10.12989/sem.2017.61.3.347
  24. Self‐calibrating Bayesian real‐time system identification vol.34, pp.9, 2013, https://doi.org/10.1111/mice.12441
  25. Ultimately Bounded Filtering for Time-Delayed Nonlinear Stochastic Systems with Uniform Quantizations under Random Access Protocol vol.20, pp.15, 2020, https://doi.org/10.3390/s20154134
  26. A general synthesis of identification and vibration control of building structures under unknown excitations vol.143, pp.None, 2013, https://doi.org/10.1016/j.ymssp.2020.106803
  27. Switching Bayesian dynamic linear model for condition assessment of bridge expansion joints using structural health monitoring data vol.160, pp.None, 2013, https://doi.org/10.1016/j.ymssp.2021.107879
  28. Real-time simultaneous input-state-parameter estimation with modulated colored noise excitation vol.165, pp.None, 2022, https://doi.org/10.1016/j.ymssp.2021.108378