Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

A new SDOF method of one-way reinforced concrete slab under non-uniform blast loading

  • Wang, Wei (Luoyang Institute of Hydraulic Engineering and Technology) ;
  • Zhang, Duo (Institute of Technique Physics, College of Science, National University of Defense Technology) ;
  • Lu, Fangyun (Institute of Technique Physics, College of Science, National University of Defense Technology) ;
  • Liu, Ruichao (Luoyang Institute of Hydraulic Engineering and Technology)
  • Received : 2012.11.01
  • Accepted : 2013.04.24
  • Published : 2013.06.10
⟨ Previous Next ⟩

Abstract

A new effective model for calculation of the equivalent uniform blast load for non-uniform blast load such as close-in explosion of a one-way square and rectangle reinforced concrete slab is proposed in this paper. The model is then validated using single degree of freedom (SDOF) system with the experiments and blast tests for square slabs and rectangle slabs. Test results showed that the model is accurate in predicting the damage level on the tested RC slabs under the given explosive charge weight and stand-off distance especially for close-in blast load. The results are also compared with those obtained by conventional SDOF analysis and finite element (FE) analysis using solid elements. It is shown that the new model is more accurate than the conventional SDOF analysis and is running faster than the FE analysis.

Keywords

References

  1. AUTODYN (2006), "Theory Manual. Century Dynamics".
  2. Bangash, M.Y. H. and Bangash, T. (2006), Explosion-resistant buildings design, analysis, and case studies, Springer, Berlin.
  3. Biggs, J.M. (1964), Introduction to Structural Dynamics, McGraw-Hill.
  4. Islama, A.K.M.A. and Yazdani, N. (2008), "Performance of AASHTO girder bridges under blast loading" , Eng. Struct., 30, 1922-1937. https://doi.org/10.1016/j.engstruct.2007.12.014
  5. Johnson, G.R. and Cook, W.H. (1983), "A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures", Proceedings of the seventh international symposium on ballistics, The Hague, The Netherlands.
  6. Jones, J., Wu, C., and Oehlers, D.J. et al. (2009), "Finite difference analysis of simply supported RC slabs for blast loadings", Eng. Struct., 31, 2825-2832. https://doi.org/10.1016/j.engstruct.2009.07.011
  7. Krauthammer, T. (1999), "Blast-resistant structural concrete and steel connections", Int. J. Impact Eng., 22(9-10), 887-910. https://doi.org/10.1016/S0734-743X(99)00009-3
  8. Krauthammer, T. (2008), Modern Protective Structures, CRC Press.
  9. LS-DYNA (2007), Version 971 Manual, Livermore Software Technology Corporation (LSTC), Livermore (CA, USA).
  10. Luccioni, B.M., Ambrosini, R.D. and Danesi, R.F. (2004), "Analysis of building collapse under blast loads", Eng. Struct., 26(1), 63-71. https://doi.org/10.1016/j.engstruct.2003.08.011
  11. Mays, G.C. and Smith, P.D. (1995), Blast effects on buildings-design of buildings to optimize resistance to blast loading, Thomas Telford, London.
  12. Nash, P.T., Vallabhan, C.V.G. and Knight, T.C. (1995), "Spall damage to concrete walls from closein cased and uncased explosions in air", ACI Struct. J., 92(6), 680-688.
  13. Newmark, N.M. (1962), "A method of computation for structural dynamics", American Society of Civil Engineers Transactions, Paper No. 3384, 127.
  14. Ohkubo, K., Beppu, M. and Ohno, T. et al. (2008), "Experimental study on the effectiveness of fiber sheet reinforcement on the explosive-resistant performance of concrete plates", Int. J. Impact Eng., 35(12), 1702-1708. https://doi.org/10.1016/j.ijimpeng.2008.07.022
  15. Osteraas, J.D. (2006), "Murrah building bombing revisited: a qualitative assessment of blast damage and collapse patterns", J. Perform. Constr. Facil., 20(4), 330-335. https://doi.org/10.1061/(ASCE)0887-3828(2006)20:4(330)
  16. PDC-TR-06-01(Rev1) (2008), Methodology Manual for the Single-Degree-of-Freedom Blast Effects Design Spreadsheets (SBEDS), US Army Corps of Engineers.
  17. Rabczuk, T. and Eibl, J. (2003), "Simulation of high velocity concrete fragmentation using SPH/MLSPH", Int. J. Numer. Meth. Eng., 56(10), 1421-1444. https://doi.org/10.1002/nme.617
  18. Rabczuk, T., Eibl, J. and Stempniewski, L. (2004), "Numerical analysis of high speed concrete fragmentation using a meshfree Lagrangian method", Eng. Fract. Mech., 71(4-6), 547-556. https://doi.org/10.1016/S0013-7944(03)00032-8
  19. Riedel, W., Thoma, K. and Hiermaier, S. (1999), "Numerical analysis using a new macroscopic concrete model for hydrocodes", Proceedings of 9th international symposium on interaction of the effects of munitions with structures, 315-322.
  20. Silva, P.F. and Lu, B. (2007), "Improving the blast resistance capacity of RC slabs with innovative composite materials", Composites: Part B, 38, 523-534. https://doi.org/10.1016/j.compositesb.2006.06.015
  21. Silva, P.F. and Lu, B. (2009), "Blast resistance capacity of reinforced concrete slabs", J. Struct. Eng., 135(6), 708-716. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000011
  22. Tedesco, J.W., McDougal, W.G. and Ross, C.A. (1999), Structural Dynamics: Theory and Applications, Addison-Wesley Longman Inc, Menlo Park, CA.
  23. TM5-1300 (1990), Structures to resist the effects of accidental explosions, US Department of the Army, Navy and Air Force Technical Manual.
  24. UFC-3-340-02 (2008), Unified facilities criteria UFC DOD structures to resist the effects of accidental explosions, US Department of Defense.
  25. Wang, W., Zhang, D. and Lu, F.Y. (2012a), "The influence of load pulse shape on pressure-impulse diagrams of one-way RC slabs", Struct. Eng. Mech., 42(3), 363-381. https://doi.org/10.12989/sem.2012.42.3.363
  26. Wang, W., Zhang, D. and Lu, F.Y. et al. (2013a), "Pressure-impulse diagram with multiple failure modes of one-way reinforced concrete slab under blast loading using SDOF method", Journal of Central South University, 20(2), 510-519. https://doi.org/10.1007/s11771-013-1513-z
  27. Wang, W., Zhang, D. and Lu, F.Y. et al. (2012b), "Experimental study on scaling the explosion resistance of a one-way square reinforced concrete slab under a close-in blast loading", Int. J. Impact Eng., 49, 158-164. https://doi.org/10.1016/j.ijimpeng.2012.03.010
  28. Wang, W., Zhang, D. and Lu, F.Y. et al. (2013b), "Experimental study and numerical simulation of the damage mode of a square reinforced concrete slab under close-in explosion", Eng. Failure Anal., 27, 41-51. https://doi.org/10.1016/j.engfailanal.2012.07.010
  29. Wu, C., Oehlers, D.J. and Rebentrost, M. et al. (2009), "Blast testing of ultra-high performance fibre and FRP-retrofitted concrete slabs", Eng. Struct., 31, 2060-2069. https://doi.org/10.1016/j.engstruct.2009.03.020
  30. Xu, K. and Lu, Y. (2006), "Numerical simulation study of spallation in reinforced concrete plates subjected to blast loading", Comput. Struct., 84, 431-438. https://doi.org/10.1016/j.compstruc.2005.09.029
  31. Zhou, X.Q., Hao, H. and Deeks, A.J. (2005), "Modeling dynamic damage of concrete slab under blast loading", Proceeding of the 6th Asia-Pacific Conference on Shock and Impact Loads on Structures, Perth,WA, Australia .

Cited by

  1. Damage features and dynamic response of RC beams under blast vol.62, 2016, https://doi.org/10.1016/j.engfailanal.2015.12.001
  2. Analysis of a bridge collapsed by an accidental blast loads vol.36, 2014, https://doi.org/10.1016/j.engfailanal.2013.10.022
  3. A nonlinear SDOF model for blast response simulation of elastic thin rectangular plates vol.88, 2016, https://doi.org/10.1016/j.ijimpeng.2015.09.001
  4. Method for evaluating the displacement response of RC beams subjected to close-in explosion using modified SDOF model vol.157, 2018, https://doi.org/10.1016/j.engstruct.2017.11.067
  5. 近接爆発による分布荷重を受けるRCはりの曲げ応答評価法の提案 vol.74, pp.3, 2018, https://doi.org/10.2208/jscejseee.74.399
  6. Numerical analysis of reaction forces in blast resistant gates vol.63, pp.3, 2013, https://doi.org/10.12989/sem.2017.63.3.347
  7. Numerical investigation of a new structural configuration of a concrete barrier wall under the effect of blast loads vol.11, pp.suppl1, 2013, https://doi.org/10.1007/s40091-019-00252-8
  8. Blast pressure analysis due to confined explosion-after effects vol.28, pp.None, 2020, https://doi.org/10.1016/j.istruc.2020.08.057
  9. Simple P-I diagram for structural components based on support rotation angle criteria vol.10, pp.6, 2013, https://doi.org/10.12989/acc.2020.10.6.509
  10. Prediction of average debris launch velocity from a reinforced concrete structure based on SDOF system vol.24, pp.3, 2013, https://doi.org/10.1177/1369433220960277
  11. Dynamic vulnerability assessment and damage prediction of RC columns subjected to severe impulsive loading vol.77, pp.4, 2021, https://doi.org/10.12989/sem.2021.77.4.441