Structural Engineering and Mechanics

  • 제46권4호
  • /
  • Pages.459-486
  • /
  • 2013
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Statistical damage classification method based on wavelet packet analysis

  • Law, S.S. (Department of Civil and Environmental Engineering, Hong Kong Polytechnic University) ;
  • Zhu, X.Q. (School of Computing, Engineering and Mathematics, University of Western Sydney) ;
  • Tian, Y.J. (School of Civil Engineering, Beijing Jiaotong University) ;
  • Li, X.Y. (Department of Mechanics and Civil Engineering, Jinan University) ;
  • Wu, S.Q. (Department of Engineering Mechanics, Southeast University)
  • 투고 : 2011.05.13
  • 심사 : 2013.04.21
  • 발행 : 2013.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

A novel damage classification method based on wavelet packet transform and statistical analysis is developed in this study for structural health monitoring. The response signal of a structure under an impact load is normalized and then decomposed into wavelet packet components. Energies of these wavelet packet components are then calculated to obtain the energy distribution. Statistical similarity comparison based on an F-test is used to classify the structure from changes in the wavelet packet energy distribution. A statistical indicator is developed to describe the damage extent of the structure. This approach is applied to the test results from simply supported reinforced concrete beams in the laboratory. Cases with single and two damages are created from static loading, and accelerations of the structure from under impact loads are analyzed. Results show that the method can be used with no reference baseline measurement and model for the damage monitoring and assessment of the structure with alarms at a specified significance level.

키워드

참고문헌

  1. Bagheri, A., Ghodrati A.G., Khorasani, M. and Bakhshi, H. (2011), "Structural damage identification of plates based on modal data using 2D discrete wavelet transform", Struct. Eng. Mech., 40(1), 13-28. https://doi.org/10.12989/sem.2011.40.1.013
  2. Beheshti-Aval, S.B., Taherinasab, M. and Noori, M. (2011), "Using harmonic class loading for damage identification of plates by wavelet transformation approach", Smart Structures and Systems, 8(3), 253-274. https://doi.org/10.12989/sss.2011.8.3.253
  3. Berry, D.A. and Lindgren, B.W. (1996), Statistics: Theory and Methods, Duxbury Press, CA, USA.
  4. Carden, E.P. and Fanning, P. (2004) "Vibration based condition monitoring: A review", Struct. Health Monit., 3(4), 355-377. https://doi.org/10.1177/1475921704047500
  5. Coifman, R.R., Meyer, Y. and Wickerhauser, M.V. (1992), "Wavelet analysis and signal processing", Wavelets and Their Application, 153-178, Jones and Bartlett, Boston, MA.
  6. Davison, A.C. and Hinkley, D.V. (1997), Bootstrap methods and their application, Cambridge University Press, U.K.
  7. Doebling, S.W., Farrar, C.R. and Prime, M.B. (1998), "A summary review of vibration-based damage identification methods", Shock Vib. Digest, 30(2), 91-105. https://doi.org/10.1177/058310249803000201
  8. Fang, S.E. and Perera, R. (2009), "A response surface methodology based damage identification technique", Smart Mater. Struct., 18(6), 1-14.
  9. Farrar, C.R., Doebling, S.W. and Nix, D.A. (2001), "Vibration-based structural damage identification", Philos. T. R. Soc. A, 359(1778), 131-149. https://doi.org/10.1098/rsta.2000.0717
  10. Glantz, S.A. (2002), Primer of Biostatistics, Fifth Edition, McGraw-Hill Professional.
  11. Gokdag, H. (2011), "Wavelet-based damage detection method for a beam-type structure carrying moving mass", Struct. Eng. Mech., 38(1), 81-97. https://doi.org/10.12989/sem.2011.38.1.081
  12. Gul, M. and Catbas, F.N. (2009), "Statistical pattern recognition for structural health monitoring using time series modelling: theory and experimental versifications", Mech. Syst. Signal Pr., 23(7), 2192-2204. https://doi.org/10.1016/j.ymssp.2009.02.013
  13. Hou, Z., Noori, M. and St. Amand, R. (2000), "Wavelet-based approach for structural damage detection", J. Eng. Mech. ASCE, 126(7), 677-683. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:7(677)
  14. Iwasaki, A., Todoroki, A., Shimamura, Y. and Kobayashi, H. (2004), "An unsupervised statistical damage detection method for structural health monitoring", Smart Mater. Struct., 13(5), 80-85. https://doi.org/10.1088/0964-1726/13/5/N02
  15. Iwasaki, A., Todoroki, A., Sugiya, T., Izumi, S. and Sakai, S. (2005), "Unsupervised statistical damage diagnosis for structural health monitoring of existing civil structures", Smart Mater. Struct., 14(3), 154-161. https://doi.org/10.1088/0964-1726/14/3/018
  16. Law, S.S., Ward, H.S., Shi, G.B., Chen, R.Z., Waldron, P. and Taylor, C. (1995), "Dynamic assessment of bridge load carrying capacities - I", J. Struct. Eng.-ASCE, 121(3), 478-487. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:3(478)
  17. Law, S.S., Li, X.Y., Zhu, X.Q. and Chan, S.L. (2005) "Structural damage detection from wavelet packet sensitivity", Eng. Struct., 27(9), 1339-1348. https://doi.org/10.1016/j.engstruct.2005.03.014
  18. Li, X.Y. and Law, S.S. (2008), "Condition assessment of structures under ambient white noise excitation", AIAA J., 46(6), 1395-1404. https://doi.org/10.2514/1.30426
  19. Mallat, S. (1999), A Wavelet Tour of Signal Processing, Academic Press.
  20. Markou, M. and Singh, S. (2003), "Novelty detection: a review-part 1: statistical approaches", Signal Process., 83(12), 2481-2497. https://doi.org/10.1016/j.sigpro.2003.07.018
  21. Miller, I. and Miller, M. (2004), JOHN E. Freund's Mathematical Statistics: with applications, 7th Edition, Pearson/Prentice Hall, Upper Saddle River, New Jersey.
  22. Ren, W.X. and Sun, Z.S. (2008), "Structural damage identification by using wavelet entropy", Eng. Struct., 30(10), 2840-2849. https://doi.org/10.1016/j.engstruct.2008.03.013
  23. Ruotolo, R. and Surace, C. (1997), "A statistical approach to damage detection through vibration monitoring", Proceedings of the 5th Pan American Congress of Applied Mechanics, Puerto, Rice.
  24. Snedecor, G.W. and Cochran, W.G. (1989), Statistical methods, 8th Edition, Ames: The Iowa State University Press.
  25. Sohn, H., Czarnecki, J.A. and Farrar, C.R. (2000), "Structural health monitoring using statistical process control", J. Struct. Eng.-ASCE, 126(11), 1356-1363. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:11(1356)
  26. Sohn, H. and Farrar, C.R. (2001), "Damage diagnosis using time series analysis of vibration signals", Smart Mater. Struct., 10(3), 446-451. https://doi.org/10.1088/0964-1726/10/3/304
  27. Sohn, H., Farrar, C.R., Hemez, F.M., Shunk, D.D., Stinemates, D.W. and Nadler, B.R. (2003), A Review of Structural Health Monitoring Literature: 1996-2001, Los Alamos National Laboratory Report.
  28. Sohn, H. (2007), "Effects of environmental and operational variability on structural health monitoring", Philos. T. R. Soc. A, 365(1851), 539-560. https://doi.org/10.1098/rsta.2006.1935
  29. Sun, Z. and Chang, C.C. (2002), "Structural damage assessment based on wavelet packet transform", J. Struct. Eng.- ASCE, 128(10), 1354-1361. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:10(1354)
  30. Sun, Z. and Chang, C.C. (2004), "Statistical wavelet-based method for structural health monitoring", J.Struct. Eng.- ASCE, 130(7), 1055-1062. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:7(1055)
  31. Worden, K., Manson, G. and Fieller, N.R.J. (2000), "Damage detection using outlier analysis",J Sound Vib, 229(3), 647-667. https://doi.org/10.1006/jsvi.1999.2514
  32. Yam, L.H., Yan, Y.J. and Jiang, J.S. (2003), "Vibration-based damage detection for composite structures using wavelet transform and neural network identification", Compos. Struct., 60(4), 403-412. https://doi.org/10.1016/S0263-8223(03)00023-0
  33. Yun, G.J., Lee, S.G., Carletta, J. and Nagayama, T. (2011), "Decentralized damage identification using wavelet signal analysis embedded on wireless smart sensors", Eng. Struct., 33(7), 2162-2172. https://doi.org/10.1016/j.engstruct.2011.03.007
  34. Zhang, J., Xu, Y.L., Xia, Y. and Li, J. (2008), "A new statistical moment-based structural damage detection method", Struct. Eng. Mech., 30(4), 445-466. https://doi.org/10.12989/sem.2008.30.4.445

피인용 문헌

  1. Damage alarming analysis for ancient wood structures based on wavelet packet energy spectrum vol.10, pp.4, 2014, https://doi.org/10.1108/MMMS-11-2013-0069
  2. A Hybrid Procedure for Structural Damage Identification in Beam-Like Structures Using Wavelet Analysis vol.18, pp.11, 2015, https://doi.org/10.1260/1369-4332.18.11.1901
  3. Micro-seismic monitoring in mines based on cross wavelet transform vol.11, pp.6, 2016, https://doi.org/10.12989/eas.2016.11.6.1143
  4. Dynamic field monitoring data analysis of an ancient wooden building in seismic and operational environments vol.11, pp.6, 2016, https://doi.org/10.12989/eas.2016.11.6.1043
  5. Bridge Damage Identification from Moving Load Induced Deflection Based on Wavelet Transform and Lipschitz Exponent vol.16, pp.05, 2016, https://doi.org/10.1142/S0219455415500030
  6. Wavelet analysis based damage localization in steel frames with bolted connections vol.18, pp.6, 2016, https://doi.org/10.12989/sss.2016.18.6.1189
  7. Hierarchical Wavelet-Aided Neural Intelligent Identification of Structural Damage in Noisy Conditions vol.7, pp.7, 2017, https://doi.org/10.3390/app7040391
  8. Bayesian Prediction of Pre-Stressed Concrete Bridge Deflection Using Finite Element Analysis vol.19, pp.22, 2013, https://doi.org/10.3390/s19224956
  9. The Teager-Kaiser Energy Cepstral Coefficients as an Effective Structural Health Monitoring Tool vol.9, pp.23, 2019, https://doi.org/10.3390/app9235064
  10. A Shannon Entropy-Based Methodology to Detect and Locate Cables Loss in a Cable-Stayed Bridge vol.13, pp.5, 2021, https://doi.org/10.1142/s1758825121500630
  11. Seismic Damage Identification Method for Curved Beam Bridges Based on Wavelet Packet Norm Entropy vol.22, pp.1, 2022, https://doi.org/10.3390/s22010239