DOI QR코드

DOI QR Code

The dynamic response of a prototype steel floor using velocity-source type of excitation

  • Magalhaes, Max D.C. (Department of Structural Engineering, Federal University of Minas Gerais)
  • Received : 2012.09.01
  • Accepted : 2013.04.09
  • Published : 2013.05.10

Abstract

Vibration isolators and anti-vibration mounts are ideal, for example, in creating floating floors for gymnasiums, or performance spaces. However, it is well-known that there are great difficulties on isolating vibration transmission in structural steel components, especially steel floors. Besides, the selection of inertia blocks, which are usually used by engineers as an effective vibration control measure, is usually based on crude methods or the experience of the engineers. Thus, no simple method or indices have been available for assessing the effect of inertia blocks on vibration isolation or stability of vibratory systems. Thus, the aims of this research are to provide further background description using a FE model and present and implement a modal approach, that was validated experimentally, the latter assisting in providing improved understanding of the vibration transmission phenomenon in steel buildings excited by a velocity-source type of excitation. A better visualization of the mean-square velocity distribution in the frequency domain is presented using the concept of modal expansion. Finally, the variation of the mean-square velocity with frequency, whilst varying mass and/or stiffness of the coupled system, is presented.

Keywords

References

  1. Abaqus/CAE (2005), "User's Manual v6.7".
  2. Brownjohn, J.M.W. and Xia, P. (2000), "Dynamic assessment of curved cable-stayed bridge by model updating", ASCE J. Struct. Eng., 126(2), 252-260. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:2(252)
  3. Cremer, L., Heckl, M. and Petersson, B.A.T. (2005), Structure Borne Sound, Springer-Verlag Berlin.
  4. Fahy, F.J. (1985), Sound and Structural Vibration, Academic Press London.
  5. Fulford, R.A. and Gibbs, B.M. (1997), "Structure-borne sound power and source characterization in multipoint-connected systems, part 1: case studied for assumed force distributions", J. Sound Vib., 204(4), 659-77. https://doi.org/10.1006/jsvi.1997.0965
  6. Fulford, R.A. and Gibbs, B.M. (1999), "Structure-borne sound power and source characterization in multipoint-connected systems, part 2: about mobility functions and free velocities", J. Sound Vib., 225(2), 239-282. https://doi.org/10.1006/jsvi.1998.2256
  7. Langley, R.S. (2007), "Numerical evaluation of the acoustic radiation from planar structures with feneral baffle conditions using wavelets", J. Acoust. Soc. Am., 121, 766-777. https://doi.org/10.1121/1.2405125
  8. Leppington, F.G., Broadbent, E.G. and Heron, K.H. (1982), "The acoustic radiation efficiency of rectangular panel", CMES: Proceedings of the Royal Society of London, Series A, Math Physical Sciences, 382, 245-271. https://doi.org/10.1098/rspa.1982.0100
  9. Mak, C.M. and Su, J.X. (2002), "A power transmissibility method for assessing the performance of vibration isolation of building services equipment", Appl. Acoust., 63(12), 1281-1299. https://doi.org/10.1016/S0003-682X(02)00047-6
  10. Mondot, J.M. and Petersson, B.A.T. (1987), "Characterization of structure-borne sound sources: the source descriptor and coupling function", J. Sound Vib., 114, 507-18. https://doi.org/10.1016/S0022-460X(87)80020-2
  11. Pan, J., Guo, J. and Ayres, C. (2005), "Improvement of sound absorption of honey-comb panels", Proceedings of Acoustics, Busselton, Western Australia.
  12. Pavic, A. and Reynolds, P. (2003), "Modal testing and dynamic FE model correlation and updating of a prototype high-strength concrete floor", Cement and Concrete Composites, 25, 787-799. https://doi.org/10.1016/S0958-9465(02)00100-2
  13. Petersson, B.A.T. and Gibbs, B.M. (2000), "Towards a structure-borne sound source characterization", Appl. Acoust. 63(12), 325-343.
  14. Rao, S.S. (1995), Mechanical vibrations, Third Edition, Addison-Wesley.
  15. Remillieux, M.C. (2012), "External pressure loading, vibration, and acoustic responses at low frequencies of building components exposed to impulsive sound", Applied Acoustics, 73, 1059-1075. https://doi.org/10.1016/j.apacoust.2012.05.004
  16. Sanz, R.M., Castizo, M.M. and Gomez, R.V. (2011), "The performance of resilient layers made from recycled rubber fluff for impact noise reduction", Applied Acoustics, 72, 823-828. https://doi.org/10.1016/j.apacoust.2011.05.004
  17. Vigoureux, D. and Guyader, J.L. (2012), "A simplified time reversal method used to localize vibrations sources in a complex structure", Applied Acoustics, 73, 491-496. https://doi.org/10.1016/j.apacoust.2011.12.004