Wind and Structures

  • 제17권4호
  • /
  • Pages.399-417
  • /
  • 2013
  • /
  • 1226-6116(pISSN)
  • /
  • 1598-6225(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Analysis and active control for wind induced vibration of beam with ACLD patch

  • 투고 : 2012.08.21
  • 심사 : 2013.02.19
  • 발행 : 2013.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

The structural vibration suppression with active constrained layer damping (ACLD) was widely studied recently. However, the literature seldom concerned with the vibration control on flow-induced vibration using active constrained layer. In this paper the wind induced vibration of cantilevered beam is analyzed and suppressed by using random theory together with a velocity feedback control strategy. The piezoelectric material and frequency dependent viscoelastic layer are used to achieve effective active damping in the vibration control. The transverse displacement and velocity in time and frequency domains, as well as the power spectral density and the mean-square value of the transverse displacement and velocity, are formulated under wind pressure at variable control gain. It is observed from the numerical results that the wind induced vibration can be significantly suppressed by using a small outside active voltage on the constrained layer.

키워드

참고문헌

  1. Balamurugan, V. and Narayanan, S. (2002), "Active-passive hybrid damping in beams with enhanced smart constrained layer treatment", Eng. Struct., 24, 355-363. https://doi.org/10.1016/S0141-0296(01)00101-8
  2. Cai, C., Zheng, H., Hung, K.C. and Zhang, Z.J. (2006), "Vibration analysis of a beam with an active constraining layer damping patch", Smart Mater. Struct., 15, 147-156. https://doi.org/10.1088/0964-1726/15/1/043
  3. Chai, W. and Feng, M.Q. (1997), "Vibration control of super tall buildings subjected to wind loads", Int. J. Nonlinear Mech., 32(4), 657-668. https://doi.org/10.1016/S0020-7462(96)00094-7
  4. Kaimal, J.C.,Wyngaard, J.C., Izumi, Y. and Cote, O.R. (1972), "Spectral characteristics of surface-layer, Turbulence", Q. J. Roy. Meteor. Soc., 98, 563-589. https://doi.org/10.1002/qj.49709841707
  5. Kolousek, V., Pirner, M., Fischer, O. and Naprstek, J. (1984), Wind effects on civil engineering structures, Elsevier, Amsterdam.
  6. Kubo, Y., Modi, V.J., Kotsubo, C., Hayashida, K. and Kato, K. (1996), "Suppression of wind-induced vibrations of tall structures through moving surface boundary-layer control", J. Wind Eng. Ind. Aerod., 61, 181-194. https://doi.org/10.1016/0167-6105(96)00039-6
  7. Kwok, K.C.S. and Samali, B. (1995), "Performance of tuned mass dampers under wind loads", Eng. Struct., 17(9) , 655-667. https://doi.org/10.1016/0141-0296(95)00035-6
  8. Lee, J.T. (2005), "Active structural acoustics control of beams using active constrained layer damping through loss factor maximization", J. Sound Vib., 287, 481-503. https://doi.org/10.1016/j.jsv.2004.11.006
  9. Lee, U. and Kim, J. (2001), "Spectral element modeling for the beams treated with active constrained layer damping", Int. J. Solids Struct., 38, 5679-5702. https://doi.org/10.1016/S0020-7683(00)00360-7
  10. Li, F.M., Kishimoto, K., Wang, Y.S., Chen, Z.B. and Huang, W.H. (2008), "Vibration control of beams with active constrained layer damping", Smart Mater. Struct., 17, 1-9.
  11. Li, F.M. (2012) "Active aeroelastic flutter suppression of a supersonic plate with piezoelectric material", Int. J. Eng. Sci., 51, 190-203. https://doi.org/10.1016/j.ijengsci.2011.10.003
  12. Li, J. and Narita, Y. (2012a), "Vibration suppression for laminated cylindrical panels with arbitrary edge conditions", J. Vib. Control, 19(4), 626-640.
  13. Li, J. and Narita, Y. (2012b), "The effect of aspect ratios and edge conditions on optimal damping design of thin soft core sandwich plates and beams", J. Vib. Control, DOI: 10.1177/1077546312463756.
  14. Li, J. and Narita, Y. (2013a), "Analysis and optimal design for the damping property of laminated viscoelastic plates under general edge conditions", Composites Part B, 45, 972-980. https://doi.org/10.1016/j.compositesb.2012.09.014
  15. Li, J. and Narita, Y. (2013b), "Analysis and optimal design for supersonic composite laminated plate", Compos. Struct., 101, 35-46. https://doi.org/10.1016/j.compstruct.2013.01.022
  16. Simiu, F. and Scanlan, R.H. (1986), Wind effects on structures, 2nd Ed., Wiley, New York.
  17. Solari, G. (1997), "Wind excited response of structures with uncertain parameters", Probabilist. Eng. Mech., 12(2), 75-87. https://doi.org/10.1016/S0266-8920(96)00027-6
  18. Sun, D. and Tong, L. (2004), "A compressional-shear model for vibration control of beams with active constrained layer damping", Int. J. Mech. Sci., 46, 1307-1325. https://doi.org/10.1016/j.ijmecsci.2004.08.005
  19. Vasques, C.M.A., Mace, B.R., Gardonio, P. and Rodrigues, J.D. (2006), "Arbitrary active constrained layer damping treatments on beams, finite element modelling and experimental validation", Comput. Struct., 84, 1384-1401. https://doi.org/10.1016/j.compstruc.2006.01.035
  20. Wieringa, J. (1998), "How far can agrometeorological station observations be considered representative", Proceedings of the 23rd Conference on Agricul- tural and Forest Meteorology, 2-6 November (N. Mex., USA). Weather data requirements for Integrated Pest Management, 9-12. American Meteorological Society.
  21. Zhang, J. and Roschke, P.N. (1999), "Active control of a tall structure excited by wind", J. Wind Eng. Ind. Aerod., 83, 209-223. https://doi.org/10.1016/S0167-6105(99)00073-2