콘크리트학회논문집 (Journal of the Korea Concrete Institute)

  • 제25권5호
  • /
  • Pages.529-537
  • /
  • 2013
  • /
  • 1229-5515(pISSN)
  • /
  • 2234-2842(eISSN)
한국콘크리트학회 (Korea Concrete Institute)
권호 표지
DOI QR코드

DOI QR Code

하중기반 유한요소모델에 의한 FRP 보강 철근콘크리트 기둥의 비선형 해석

Nonlinear Analysis of FRP Strengthened Reinforced Concrete Columns by Force-Based Finite Element Model

  • 투고 : 2013.03.05
  • 심사 : 2013.07.12
  • 발행 : 2013.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

이 연구의 목적은 하중기반 유한요소 정식화에 의한 FRP 보강된 철근콘크리트 보 또는 기둥 부재의 비선형 층상화의 등매개 골조 유한요소모델을 개발하는데 있다. 단면에서 콘크리트는 3축 응력-변형률 관계로 모델화하고 FRP 피복층은 2차원의 적층복합재료로 모델화하였다. 하중기반 유한요소의 요소강성행렬은 변위형상함수의 가정이 없고 하중보간함수를 갖고 있다. 횡 하중을 받는 GFRP 시트 보강된 철근콘크리트 기둥의 실험에 대해 개발된 하중기반 유한요소모델에 의한 해석을 수행하였다. 기존 강성도법의 유한요소해석과 비교하여 하중기반 유한요소해석은 전체적인 하중-변위 관계 뿐만 아니라 기둥의 소성힌지영역에서의 비선형 변형 및 손상을 보다 정확히 예측해 주었다.

The aim of the current study is to develop a nonlinear isoparametric layered frame finite element (FE) analysis of FRP strengthened reinforced concrete (RC) beam or column members by a force-based FE formulation. In sections, concrete is modeled in the triaxial stress-strain relationship state and the FRP sheet is modeled as layered composite materials in two-dimension. The element stiffness matrix derived by the force-based FE has the force-interpolation functions without assuming the displacement shape functions. A lateral load test of RC column strengthened by GFRP sheets was analyzed by the developed force-based FE model. From comparative studies of the experimental and analysis results, it was shown to compare with the stiffness FE method that the force-based FE analysis could give more accurate predictions in the overall lateral load-deflection response as well as in nonlinear deformations and damages in the column plastic hinge region.

키워드

참고문헌

  1. Clough, R. and Johnston, S., "Effect of Stiffness Degradation on Earthquake Ductility Requirements," Transactions of Japan Earthquake Engineering Symposium, Tokyo, 1966, pp. 195-198.
  2. Giberson, M., The Response of Nonlinear Multi-Story Structures Subjected to Earthquake Excitations, Earthquake Engineering Research Laboratory, Pasadena, 1967.
  3. Otani, S., "Inelastic Analysis of R/C Frame Structures," Journal of the Structural Division, Vol. 100, No. 7, 1974, pp. 1433-1449.
  4. Meyer, C., Roufaiel, M. S., and Arzoumanidis, S. G., "Analysis of Damaged Concrete Frames for Cyclic Loads," Earthquake Engineering and Structural Dynamics, Vol. 11, Issue 2, 1983, pp. 207-228. (doi: http://dx.doi.org/10.1002/ eqe.4290110205)
  5. Cho, C. G. and Kwon, M., "Development and Modeling of Frictional Wall Damper and Its Application In R/C Frame Structures," Earthquake Engineering and Structural Dynamics, Vol. 33, No. 7, 2004, pp. 821-838. (doi: http://dx. doi.org/10.1002/eqe.379)
  6. Cho, C. G., Ha, G. J., and Kim, Y. Y., "Nonlinear Model of Reinforced Concrete Frames Retrofitted by In-Filled HPFRCC Walls," Structural Engineering and Mechanics, Vol. 30, No. 2, 2008, pp. 211-223. https://doi.org/10.12989/sem.2008.30.2.211
  7. Mari, A. and Scordelis, A., "Nonlinear Geometric Material and Time Dependent Analysis of Three Dimensional Reinforced and Prestressed Concrete Frames," SESM Report 82-12, Dept. of Civil Engineering, University of California, Berkeley, 1984, 176 pp.
  8. Spacone, E., "Flexibility-Based Finite Element Models for the Nonlinear Static and Dynamic Analysis of Concrete Frame Structures," Ph.D Thesis, University of California, Berkeley, 1994, 268 pp.
  9. Spacone, E., Filippou, F. C., and Taucer, F. F., "Fibre Beam-Column Model for Nonlinear Analysis of R/C Frames: Part I. Formulation," Earthquake Engineering and Structural Dynamics, Vol. 25, 1996, pp. 711-725. https://doi.org/10.1002/(SICI)1096-9845(199607)25:7<711::AID-EQE576>3.0.CO;2-9
  10. Cho, C. G. and Kim, Y. S., "Accurate Algorithm of Nonlinear Force-Based Frame Finite Element," Journal of Architectural Institute of Korea, Structures & Construction, Vol. 27, No. 3, 2005, pp. 53-60.
  11. Cho, C. G. and Kwon, M., "Nonlinear Failure Prediction of Concrete Composite Columns by a Mixed Finite Element Formulation," Engineering Failure Analysis, Vol. 18, Issue 7, 2011, pp. 1723-1734. https://doi.org/10.1016/j.engfailanal.2011.03.018
  12. Burgueno, R., "System Characterization and Design of Modular Fiber Reinforced Polymer (FRP) Short-and Medium-Span Bridges," PhD Thesis, University of California, San Diego, 1999, 587 pp.
  13. Cho, C. G., Kwon, M., and Spacone, E., "Analytical Model of Concrete-Filled Fiber-Reinforced Polymer Tubes based on Multiaxial Constitutive Laws," ASCE Journal of Structural Engineering, Vol. 131, No. 9, 2005, pp. 1426-1433. (doi: http://dx.doi.org/10.1061/(ASCE)0733-9445 (2005)131:9(1426))
  14. Cho, C. G. and Kwon, M., "Prediction of Nonlinear Bending Behavior for FRP Concrete Beams Based on Multi-Axial Constitutive Laws," Engineering Structures, Vol. 30, Issue 9, 2008, pp. 2311-2320. https://doi.org/10.1016/j.engstruct.2008.01.010
  15. Cho, C. G., "Predictions for Bending and Shear Behaviors of FRP Concrete Composite Structural Members," Journal of Architectural Institute of Korea, Structures & Construction, Vol. 20, No. 8, 2004, pp. 35-42.
  16. Cho, C. G. and Kim, Y. Y., "Nonlinear Biaxial Shear Model for Fiber-Reinforced Cementitious Composite Panels," Journal of the Computational Structural Engineering Institute of Korea, Vol. 22, No. 6, 2009, pp. 597-605.
  17. Cho, C. G., Han, B. C., Lee, J. H., and Kim, Y. Y., "Flexural Test on Composite Deck Slab Produced with Extruded ECC Panel," Journal of the Korea Concrete Institute, Vol. 22, No. 5, 2010, pp. 695-702. https://doi.org/10.4334/JKCI.2010.22.5.695
  18. Cho, C. G., Ha. K. J., and Bae, S. H., "Development of Performance-Based Seismic Design of RC Column Using FRP Jacket by Displacement Coefficient Method," Journal of the Korea Concrete Institute, Vol. 19, No. 4, 2007, pp. 491-497. https://doi.org/10.4334/JKCI.2007.19.4.491
  19. Cho, C. G., "Development of Performance-Based Seismic Design of RC Column Retrofitted by FRP Jacket Using Direct Displacement-Based Design," Journal of the Earthquake Engineering Society of Korea, Vol. 11, No. 2, 2007, pp. 105-113. https://doi.org/10.5000/EESK.2007.11.2.105
  20. Cho, C. G. and Kim, Y. Y., "Displacement-Based Seismic Design of Reinforced Concrete Columns Strengthened by FRP Jackets Using a Nonlinear Flexural Model," Computers and Concrete, Vol. 6, No. 2, 2009, pp. 95-108. https://doi.org/10.12989/cac.2009.6.2.095
  21. Saenz, L. P., "Discussion of Equation for the Stress-Strain Curve of Concrete by Desayi and Krishman," Journal of American Concrete Institute, Vol. 61, 1964, pp. 1229-1235.
  22. Kupfer, H. B. and Gerstle, K. H., "Behavior of Concrete under Biaxial Stresses," Journal of Engineering Mechanics Division, Vol. 99, No. 4, 1973, pp. 852-866.
  23. Zhu, Z., "Joint Construction and Seismic Performance of Concrete-filled Fiber Reinforced Polymer Tubes," Ph.D Thesis, North Carolina State University, Raleigh, North Carolina, 2004, 215 pp.

피인용 문헌

  1. Flexural Performance of Slabs Strengthened by Fiber-Reinforced Polymer Sheet with Hydrophilic Epoxy vol.28, pp.1, 2016, https://doi.org/10.4334/JKCI.2016.28.1.085