DOI QR코드

DOI QR Code

A study on electrical and thermal properties of conductive concrete

  • Wu, Tehsien (Institute of Materials Engineering, National Taiwan Ocean University) ;
  • Huang, Ran (Department of Harbor and River Engineering, National Taiwan Ocean University) ;
  • Chi, Maochieh (Department of Fire Science, Wufeng University) ;
  • Weng, Tsailung (Physics Division, Tatung University)
  • 투고 : 2012.11.29
  • 심사 : 2013.04.14
  • 발행 : 2013.09.01

초록

Traditional concrete is effectively an insulator in the dry state. However, conductive concrete can attain relatively high conductivity by adding a certain amount of electronically conductive components in the regular concrete matrix. The main purpose of this study is to investigate the electrical and thermal properties of conductive concrete with various graphite contents, specimen dimensions and applied voltages. For this purpose, six different mixtures (the control mixtures and five conductive mixtures with steel fibers of 2% by weight of coarse aggregate and graphite as fine aggregate replacement at the levels of 0%, 5%, 10%, 15% and 20% by weight) were prepared and concrete blocks with two types of dimensions were fabricated. Four test voltage levels, 48 V, 60 V, 110 V, and 220 V, were applied for the electrical and thermal tests. Test results show that the compressive strength of specimens decreases as the amount of graphite increases in concrete. The rising applied voltage decreases electrical resistivity and increases heat of concrete. Meanwhile, higher electrical current and temperature have been obtained in small size specimens than the comparable large size specimens. From the results, it can be concluded that the graphite contents, applied voltage levels, and the specimen dimensions play important roles in electrical and thermal properties of concrete. In addition, the superior electrical and thermal properties have been obtained in the mixture adding 2% steel fibers and 10% graphite.

키워드

참고문헌

  1. ASTM C39/C39M (2012), Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, American Society for Testing and Materials.
  2. Cantin, R. and Pigeon, M. (1996), "Deicer salt scaling resistance of steel-fiber-reinforced concrete", Cem. Concr. Res., 26(11), 1639-1648. https://doi.org/10.1016/S0008-8846(96)00162-7
  3. Cheng, B., Keru, W. and Yao, W. (2004), "Piezoresitivity in carbon fiber reinforced cement based composites", J. Mater. Sci. Tech.., 20(6), 746-750.
  4. CNS 61 R2001 (2011), Standard specification for portland cement, Chinese National Standards.
  5. Garcia, A., Schlangen, E., Ven, M.V.D. and Liu, Q. (2009), "Electrical conductivity of asphalt mortar containing conductive fibers and fillers", Constr. Build. Mater., 23(10), 3175-3181. https://doi.org/10.1016/j.conbuildmat.2009.06.014
  6. Jiang, Z., Sun, Z. and Wang, X. (2000), "Conductive concrete technology", Concrete, 9, 55-58.
  7. Kurihara, N., Kunieda, M., Kamada, T., Uchida, Y. and Rokugo, K. (2000), "Tension softening diagrams and evaluation of properties of steel fibre reinforced concrete", Eng. Fract. Mech., 65, 235-245. https://doi.org/10.1016/S0013-7944(99)00116-2
  8. Liu, X. and Shaopeng, W. (2011), "Study on the graphite and carbon fiber modified asphalt concrete", Constr. Build. Mater., 25(4), 1807-1811. https://doi.org/10.1016/j.conbuildmat.2010.11.082
  9. Sherif, Y., Tuan, C.Y., Ferdon, D. and Chen, B. (2000), "Conductive concrete overlay for bridge deck deicing: mixture proportioning optimization and properties", Mater. J., 97(2), 172-181.
  10. Shihai, W. and Chung, D. (2007), "Piezoresistivity-based strain sensing in carbon fiberreinforced cement", ACI Mater. J., 104(2), 171-179.
  11. Sun, M., Li, Z., Mao, Q. and Shen, D. (1998), "Study on the hole conduction phenomenon in carbon fiber-reinforced concrete", Cement Concr. Res., 28(4), 549-554. https://doi.org/10.1016/S0008-8846(98)00011-8
  12. Tuan, C.Y. (2004), "Electrical resistance heating of conductive concrete containing steel fibers and shavings", ACI Mater. J., 101(1), 65-71.
  13. Tuan, C.Y. (2008), "Roca spur bridge: the implementation of an innovative deicing technology", J. Cold. Regions. Eng., 22(1), 1-15. https://doi.org/10.1061/(ASCE)0887-381X(2008)22:1(1)
  14. Tuan, C.Y. and Yehia, S. (2004), "Evaluation of electrically conductive concrete containing carbon products for deicing", ACI Mater. J., 101(4), 287-293.
  15. Whittington, H., McCarter, W. and Forde, M.C. (1981), "The conduction of electricity through concrete", Mag. Concrete. Res., 33(114), 48-60. https://doi.org/10.1680/macr.1981.33.114.48
  16. Wu, S., Mo, L., Shui, Z. and Chen, Z. (2005), "Investigation of the conductivity of asphalt concrete containing conductive fillers", Carbon., 43, 1358-1363. https://doi.org/10.1016/j.carbon.2004.12.033
  17. Xie, P. and Beaudoin, J.J. (1995), "Electrically conductive concrete and its application in deicing: advances in concrete technology", Proceedings of the second CANMET/ACI International Symposium on Advances in Concrete Technology, Las Vegas, June.
  18. Xie, P., Gu, P. and Beaudoin, J.J. (1996), "Electrical percolation phenomena in cement composites containing fibers", J. Mater. Sci., 31, 4093-4097. https://doi.org/10.1007/BF00352673
  19. Xin, T. and Hu, H. (2012), "Test and study on electrical property of conductive concrete", P.E.P.S., 5, 83- 87.
  20. Yehia, S. (2008), "Electrically conductive concrete proves effective as bridge deicer", Road Bridge, 46, 32-35.
  21. Yehia, S. and Tuan, C.Y. (2002), "Conductive concrete overlay-An innovative solution for bridge deck deicing", Concr. Int., 24, 56-60.
  22. Yehia, S., Tuan, C.Y., Ferdon, D. and Chen, B. (2000), "Conductive concrete overlay for bridge deck deicing :mix design, optimization, and properties", ACI Mater. J., 97, 172-181.
  23. Yehia, S.A. and Tuan, C.Y. (2000), "Thin conductive concrete overlay for bridge deck deicing and anti-icing", Transport. Res. Rec., 1698, 45-53. https://doi.org/10.3141/1698-07

피인용 문헌

  1. Investigation on electrically conductive aggregates produced by incorporating carbon fiber and carbon black vol.144, 2017, https://doi.org/10.1016/j.conbuildmat.2017.03.168
  2. Recycled additions for improving the thermal conductivity of concrete in preparing energy storage systems vol.135, 2017, https://doi.org/10.1016/j.conbuildmat.2016.12.179
  3. Electrical characteristics of hierarchical conductive pathways in cementitious composites incorporating CNT and carbon fiber vol.82, 2017, https://doi.org/10.1016/j.cemconcomp.2017.06.004
  4. Electrical resistivity reduction with pitch-based carbon fiber into multi-walled carbon nanotube (MWCNT)-embedded cement composites vol.165, 2018, https://doi.org/10.1016/j.conbuildmat.2017.12.205
  5. Investigation of carbon fillers modified electrically conductive concrete as grounding electrodes for transmission towers: Computational model and case study vol.145, 2017, https://doi.org/10.1016/j.conbuildmat.2017.03.223
  6. System Requirements for Electrically Conductive Concrete Heated Pavements vol.2569, pp.1, 2016, https://doi.org/10.3141/2569-08
  7. Preparation and performance of conductive gussasphalt concrete pp.2324-9943, 2018, https://doi.org/10.1080/23249935.2018.1449913
  8. 전기저항 측정을 통한 모르타르 내의 섬유활성탄의 분산성 평가 vol.29, pp.3, 2013, https://doi.org/10.4334/jkci.2017.29.3.283
  9. The Assessment of Relative Permittivity on Diesel Vapour in the Moisture Content of Terap Red Soil by Ground Penetrating Radar vol.13, pp.None, 2013, https://doi.org/10.1177/1178622120930661
  10. Estimated relative permittivity of contaminated laterite soil: An empirical model for GPR waves vol.540, pp.None, 2013, https://doi.org/10.1088/1755-1315/540/1/012056
  11. Multifunctional layered composite material used for construction purposes vol.6, pp.None, 2021, https://doi.org/10.22227/1997-0935.2021.6.688-697