DOI QR코드

DOI QR Code

Predicting the indirect tensile strength of self-compacting concrete using artificial neural networks

  • Mazloom, Moosa (Department of Civil Engineering, Shahid Rajaee Teacher Training University) ;
  • Yoosefi, M.M. (Department of Civil Engineering, Shahid Rajaee Teacher Training University)
  • 투고 : 2011.03.03
  • 심사 : 2013.03.29
  • 발행 : 2013.09.01

초록

This paper concentrates on the results of experimental work on tensile strength of self-compacting concrete (SCC) caused by flexure, which is called rupture modulus. The work focused on concrete mixes having water/binder ratios of 0.35 and 0.45, which contained constant total binder contents of 500 $kg/m^3$ and 400 $kg/m^3$, respectively. The concrete mixes had four different dosages of a superplasticizer based on polycarboxylic with and without silica fume. The percentage of silica fume that replaced cement in this research was 10%. Based upon the experimental results, the existing equations for anticipating the rupture modulus of SCC according to its compressive strength were not exact enough. Therefore, it is decided to use artificial neural networks (ANN) for anticipating the rupture modulus of SCC from its compressive strength and workability. The conclusion was that the multi layer perceptron (MLP) networks could predict the tensile strength in all conditions, but radial basis (RB) networks were not exact enough in some circumstances. On the other hand, RB networks were more users friendly and they converged to the final networks quicker.

키워드

참고문헌

  1. ACI Committee 318-05 (2005), Building code requirements for structural concrete, American Concrete Institute.
  2. ACI Committee 318-89 (1992), Building code requirements for reinforced concrete, American Concrete Institute.
  3. Arias, A., Forquin, P., Zaera, R. and Navarro, C. (2008), "Relationship between static bending and compressive behaviour of particle-reinforced cement composites", Compos. Part B, 39(7-8), 1205-1215. https://doi.org/10.1016/j.compositesb.2008.03.002
  4. Assaad, J., Khayat, K.H. and Daczko, J. (2004), "Evaluation of static stability of self-consolidating concrete", ACI ACI Mater. J., 101(3), 207-215.
  5. Bogas, J.A. and Gomes, A. (2008), "Analysis of the CFRP flexural strengthening reinforcement approaches proposed in Fib bulletin 14", Construct. Build Mater., 22(10), 2130-2140. https://doi.org/10.1016/j.conbuildmat.2007.07.025
  6. Bui, V.K., Montgomery, D., Hinczak, I. and Turner, K. (2002), "Rapid testing method for segregation resistance of self-compacting concrete", Cement Concrete Res., 32(9), 1489-1496. https://doi.org/10.1016/S0008-8846(02)00811-6
  7. Campione, G. and Mangiavillano, M.L. (2008), "Fibrous reinforced concrete beams in flexure: experimental investigation, analytical modeling and design considerations", Eng. Struct., 30(11), 2970-2980. https://doi.org/10.1016/j.engstruct.2008.04.019
  8. Del Viso, J.R., Carmona, J.R. and Ruiz, G. (2008), "Shape and size effects on the compressive strength of high-strength concrete", Cement Concrete Res., 38(3), 386-395. https://doi.org/10.1016/j.cemconres.2007.09.020
  9. Ding, Y.N., Liu, S.G., Zhang, Y. and Thomas, A. (2008), "The investigation on the workability of fibre cocktail reinforced self-compacting high performance concrete", Construct. Build Mater., 22(7), 1462-1470. https://doi.org/10.1016/j.conbuildmat.2007.03.034
  10. Druta, C. (2003), "Tensile strength and bonding characteristics of self-compacting concrete", M.Sc. Thesis in Engineering Science, Polytechnic University, Bucharest.
  11. European Project Group (2002), Specification and guidelines for self-compacting concrete, United Kingdom, EFNARC.
  12. Felekoglu, B. (2003), "Investigation on mechanical and physical properties of SCC", M.Sc. Thesis in Civil Engineering, Dokus Eylul University, Izmir.
  13. Felekoglu, B., Turkel, S. and Baradan, B. (2008), "Effect of chemical structure of polycarboxylate-based superplasticizers on workability retention of self-compacting concrete", Construct. Building Mater., 22(9), 1792-1980.
  14. Gravina, R.J. and Smith, S.T. (2008), "Flexural behaviour of indeterminate concrete beams reinforced with FRP bars", Eng. Struct., 30(9), 2370-2380. https://doi.org/10.1016/j.engstruct.2007.12.019
  15. Ghaboussi, J., Garrett, J.H. and Wu, X. (1991), "Knowledge-based modeling of material behaviour with neural networks", J. Eng. Mech., 117(1), 129-134.
  16. Ho, D.W.S., Sheinn, A.M.M., Ng, C.C. and Tam, C.T. (2002), "The use of quarry dust for SCC applications", Cement Concrete Res., 32(4), 505-511. https://doi.org/10.1016/S0008-8846(01)00726-8
  17. Iranian National Building Code (2009), Design and Construction of Reinforced Concrete Buildings.
  18. Jianxiong, C., Xincheng, P. and Yubin, H. (1999), "A study of self-compacting HPC with superfine sand and pozzolanic additives", Proceedings of the First International RILEM Symposioum, 549-560.
  19. Kim, D.J., Naaman, A.E. and El-Tawil S. (2008), "Comparative flexural behaviour of four fiber reinforced cementitious composites", Cement Concrete Compos., 30(10), 917-928. https://doi.org/10.1016/j.cemconcomp.2008.08.002
  20. Khatri, R.P. and Sirivivatnanon, V. (1995), "Effect of different supplementary cementitious materials on mechanical properties of high performance concrete", Cement Concrete Res., 2(1), 209-220.
  21. Khayat, K.H., Assaad, J. and Daczko J. (2004), "Comparison of field-oriented test methods to assess dynamic stability of self-consolidating concrete", ACI Mater. J., 101(2), 168-176.
  22. Neville, A.M. and Brooks, J.J. (1990), Concrete Technology, Longman, United Kingdom.
  23. Okamura, H. and Ouchi, M. (1999), "Self-compacting concrete: development, present use and future", Proceedings of the First International RILEM Symposioum, 3-14.
  24. Pei, M., Wang, Z., Li, W., Zhang, J., Pan, Q. and Qin, X. (2008), "The properties of cementitious materials superplasticized with two superplasticizers based on aminosulfonate-phenol-formaldehyde", Construct. Build Mater., 22, 2382-2385. https://doi.org/10.1016/j.conbuildmat.2007.09.003
  25. Pham, H.B. and Al-Mahaidi, R. (2008), "Reliability analysis of bridge beams retrofitted with fibre reinforced polymers", Composite Structures, 82, 177-184. https://doi.org/10.1016/j.compstruct.2006.12.010
  26. Roussel, N., Geiker, M.R., Dufour, F., Thrane, L.N. and Szabo, P. (2007), "Computational modeling of flow concrete: General overview", Cement Concrete Res., 37(9), 1298-1307. https://doi.org/10.1016/j.cemconres.2007.06.007
  27. Rumelhart, D.E., Hinton, G.E. and Williams, R.J. (1986), "Learning internal representation by error propagation", Eds. Rumelhant, D.E., McClelland, J.L., Parallel Distributed Processing, Vol. 1, MIT Press.
  28. Sahmaran, M., Christianto, H.A. and Yaman, I.O. (2006), "The effect of chemical admixtures and mineral additives on the properties of self compacting mortars", Cement Concrete Compos., 28(5), 432-440. https://doi.org/10.1016/j.cemconcomp.2005.12.003
  29. Sari, M., Prat, E. and Labastire, J.F. (1999), "High strength self-compacting concrete-original solutions associating organic and inorganic admixtures", Cement Concrete Res., 29(6), 813-818. https://doi.org/10.1016/S0008-8846(99)00037-X
  30. Soranakom, C. and Mobasher, B. (2008), "Correlation of tensile and flexural responses of strain softening and strain hardening cement composites", Cement Concrete Compos., 30(6), 465-477. https://doi.org/10.1016/j.cemconcomp.2008.01.007
  31. Su, N. and Miao, B. (2003), "A new method for mix design of medium strength flowing concrete with low cement content", Cement Concrete Compos., 25(2), 215-222. https://doi.org/10.1016/S0958-9465(02)00013-6
  32. Vasconcelos, G., Lourenco, P.B., Alves, C.A.S. and Pamplona, J. (2008). "Experimental characterization of the tensile behaviour of granites", Int. J. Rock Mech. Mining Sci., 45(2), 268-277. https://doi.org/10.1016/j.ijrmms.2007.04.011
  33. Welstead, S.T. (1994), Neural network and fussy logic applications in C/C++, John Wiley and Sons, New York, USA.
  34. Wu, Z., Zhang, Y., Zheng, J. and Ding, Y. (2009), "An experimental study on the workability of self-compacting lightweight concrete", Construct. Build Mater., 23(5), 2087-2092. https://doi.org/10.1016/j.conbuildmat.2008.08.023
  35. Ye, G., Liu, X., Schutter, G.D., Poppe, A.M. and Taerwe, L. (2007), "Influence of limestone powder used as filler in SCC on hydration and microstructure of cement pastes", Cement Concrete Compos., 29(2), 94-102. https://doi.org/10.1016/j.cemconcomp.2006.09.003
  36. Yeh, I.C. (2007), "Modeling slump flow of concrete using second-order regressions and artificial neural networks", Cement Concrete Compos., 29(6), 474-480. https://doi.org/10.1016/j.cemconcomp.2007.02.001
  37. Zi, G., Oh, H. and Park, S.K. (2008), "A novel indirect tensile method to measure the biaxial tensile strength of concretes and other quasibrittle materials", Cement Concrete Res., 38(6), 751-756. https://doi.org/10.1016/j.cemconres.2008.02.002

피인용 문헌

  1. Factors affecting the properties of recycled concrete by using neural networks vol.14, pp.5, 2014, https://doi.org/10.12989/cac.2014.14.5.547
  2. Compressive, shear and torsional strength of beams made of self-compacting concrete vol.15, pp.6, 2015, https://doi.org/10.12989/cac.2015.15.6.935
  3. Modelling fresh properties of self-compacting concrete using neural network technique vol.18, pp.6, 2016, https://doi.org/10.12989/cac.2016.18.6.903
  4. Prediction of Hybrid fibre-added concrete strength using artificial neural networks vol.15, pp.4, 2015, https://doi.org/10.12989/cac.2015.15.4.503
  5. Modelling the fresh properties of self-compacting concrete using support vector machine approach vol.106, 2016, https://doi.org/10.1016/j.conbuildmat.2015.12.035
  6. The relationship between fracture toughness and compressive strength of self-compacting lightweight concrete vol.431, pp.1757-899X, 2018, https://doi.org/10.1088/1757-899X/431/6/062007
  7. Modelling fresh properties of self-compacting concrete using neural network technique vol.18, pp.4, 2013, https://doi.org/10.12989/cac.2016.18.4.903
  8. Evaluating the settlement of lightweight coarse aggregate in self-compacting lightweight concrete vol.19, pp.2, 2013, https://doi.org/10.12989/cac.2017.19.2.203
  9. Modeling of mechanical properties of roller compacted concrete containing RHA using ANFIS vol.19, pp.4, 2013, https://doi.org/10.12989/cac.2017.19.4.435
  10. Effect of silica fume and polyepoxide-based polymer on electrical resistivity, mechanical properties, and ultrasonic response of SCLC vol.5, pp.6, 2013, https://doi.org/10.12989/acc.2017.5.6.587
  11. Assessment of the influence of micro- and nano-silica on the behavior of self-compacting lightweight concrete using full factorial design vol.20, pp.1, 2019, https://doi.org/10.1007/s42107-018-0088-2
  12. Effect of ground granulated blast furnace slag on time-dependent tensile strength of concrete vol.23, pp.2, 2013, https://doi.org/10.12989/cac.2019.23.2.133
  13. Studying the effects of CFRP and GFRP sheets on the strengthening of self-compacting RC girders vol.6, pp.1, 2013, https://doi.org/10.12989/smm.2019.6.1.047
  14. Thermal effects on the mechanical properties of cement mortars reinforced with aramid, glass, basalt and polypropylene fibers vol.8, pp.2, 2013, https://doi.org/10.12989/amr.2019.8.2.137
  15. Size effect study on compressive strength of SCLC vol.23, pp.6, 2013, https://doi.org/10.12989/cac.2019.23.6.409
  16. Fracture behavior of self-compacting semi-lightweight concrete containing nano-silica vol.22, pp.10, 2013, https://doi.org/10.1177/1369433219837426
  17. Application of artificial neural networks for the prediction of the compressive strength of cement-based mortars vol.24, pp.4, 2013, https://doi.org/10.12989/cac.2019.24.4.329
  18. Regression and ANN models for durability and mechanical characteristics of waste ceramic powder high performance sustainable concrete vol.25, pp.2, 2013, https://doi.org/10.12989/cac.2020.25.2.119
  19. Long-term quality control of self-compacting semi-lightweight concrete using short-term compressive strength and combinatorial artificial neural networks vol.25, pp.5, 2013, https://doi.org/10.12989/cac.2020.25.5.401
  20. Comparison of data mining methods to predict mechanical properties of concrete with fly ash and alccofine vol.15, pp.None, 2013, https://doi.org/10.1016/j.jmrt.2021.09.024