DOI QR코드

DOI QR Code

Modelling of strains in reinforced concrete flexural members using alpha-stable distribution

  • Rao, K. Balaji (CSIR-Structural Engineering Research Centre, CSIR Campus Taramani) ;
  • Anoop, M.B. (CSIR-Structural Engineering Research Centre, CSIR Campus Taramani) ;
  • Kesavan, K. (CSIR-Structural Engineering Research Centre, CSIR Campus Taramani) ;
  • Balasubramanian, S.R. (CSIR-Structural Engineering Research Centre, CSIR Campus Taramani) ;
  • Ravisankar, K. (CSIR-Structural Engineering Research Centre, CSIR Campus Taramani) ;
  • Iyer, Nagesh R. (CSIR-Structural Engineering Research Centre, CSIR Campus Taramani)
  • 투고 : 2011.12.28
  • 심사 : 2012.10.29
  • 발행 : 2013.05.01

초록

Large fluctuations in surface strain at the level of steel are expected in reinforced concrete flexural members at a given stage of loading due to the emergent structure (emergence of new crack patterns). This has been identified in developing deterministic constitutive models for finite element applications in Ibrahimbegovic et al. (2010). The aim of this paper is to identify a suitable probability distribution for describing the large deviations at far from equilibrium points due to emergent structures, based on phenomenological, thermodynamic and statistical considerations. Motivated by the investigations reported by Prigogine (1978) and Rubi (2008), distributions with heavy tails (namely, alpha-stable distributions) are proposed for modeling the variations in strain in reinforced concrete flexural members to account for the large fluctuations. The applicability of alpha-stable distributions at or in the neighborhood of far from equilibrium points is examined based on the results obtained from carefully planned experimental investigations, on seven reinforced concrete flexural members. It is found that alpha-stable distribution performs better than normal distribution for modeling the observed surface strains in reinforced concrete flexural members at these points.

키워드

참고문헌

  1. ACI (2002), Control of cracking in concrete structures, ACI manual of concrete practice, ACI 224, American Concrete Institute, Detroit.
  2. Balaji Rao, K. and Appa Rao, T.V.S.R. (1999), "Cracking in reinforced concrete flexural members - a Reliability Model", Struct. Eng. Mech., 7(3), 303-318. https://doi.org/10.12989/sem.1999.7.3.303
  3. Balaji Rao, K. (2009), "The applied load, configuration and fluctuation in non-linear analysis of reinforced concrete structures - some issues related to performance based design", Proceedings of International Conference on Advances in Concrete, Structural and Geotechnical Engineering (ACSGE 2009), BITS Pilani, India.
  4. Bates, S. and McLaughlin, S. (2000), "The estimation of stable distribution parameters from teletraffic data", IEEE T. Signal Proces., 48(3), 865-870. https://doi.org/10.1109/78.824681
  5. Bazant, Z.P. (2002), Scaling of structural strength, Elsevier Butterworth-Heinemann, Second Edition.
  6. Bazant, Z.P. and Cedolin, L. (2010), Stability of structures - elastic, inelastic, fracture and damage theories, World Scientific.
  7. Bazant, Z.P. and Oh, B.H. (1983), "Spacing of cracks in reinforced concrete", J. Struct. Eng.-ASCE, 109(9), 2066-2085. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:9(2066)
  8. Belov, I.A. (2005), "On the computation of the probability density function of-stable distributions", Math. Model. Anal. Proc. 10th International Conference MMA2005&CMAM2, Trakai. 333-341.
  9. Benkemoun, N., Hautefeuille, M., Colliat, J.B. and Ibrahimbegovic, A. (2010), "Failure of heterogeneous materials: 3D meso-scale FE models with embedded discontinuities", Int. J. Numer. Meth. Eng., 82(13), 1671-1688.
  10. Borak, S., Hardle, W. and Weron, R. (2005), "Stable distributions", SFB 649 Discussion Paper 2005-008, SFB 649, Humboldt-Universitazu Berlin.
  11. Bresler, B. (1974), Reinforced concrete engineering: Vol.1-materials, structural elements, safety, John Wiley and Sons, New York.
  12. BS 8110 (1997), Structural use of concrete, Code of Practice for Design and Construction, British Standards Institution, UK
  13. Carpinteri, A. and Puzzi, S. (2009), "The fractal-statistical approach to the size-scale effects on material strength and toughness", Probab. Eng. Mech., 24(1), 75-83. https://doi.org/10.1016/j.probengmech.2008.01.003
  14. Carpinteri, A., Cornetti, P. and Puzzi, S. (2006), "Scaling laws and multiscale approach in the mechanics of heterogeneous and disordered materials", Appl. Mech. Rev., 59(5), 283-305. https://doi.org/10.1115/1.2204076
  15. CEB (1990), Model code for concrete structures, Euro-International Concrete Committee, Switzerland.
  16. de Borst, R. (1987), "Computation of post-buckling and post-failure behavior of strain-softening solids", Comput. Struct., 25(2), 211-224. https://doi.org/10.1016/0045-7949(87)90144-1
  17. de Borst, R., Gutierrez, M.A., Wells, G.N., Remmers, J.J.C and Askes, H. (2004), "Cohesive-zone models, higher-order continuum theories and reliability methods for computational failure analysis", Int. J. Numer. Meth. Eng., 60, 289-315. https://doi.org/10.1002/nme.963
  18. de Groot, S.R. and Mazur, P. (1984), Non-equilibrium thermodynamics, Dover Publications.
  19. Desayi, P and Rao, B.K. (1987), "Probabilistic analysis of cracking of RC beams", Mater. Struct., 20(120), 408-417. https://doi.org/10.1007/BF02472491
  20. Desayi, P. and Rao, B.K. (1989), "Reliability of reinforced concrete beams in limit state of cracking - failure rate analysis approach", Mater. Struct., 22(4), 269-279. https://doi.org/10.1007/BF02472559
  21. Desayi, P. and Ganesan, N. (1985), "An investigation on spacing of cracks and maximum crackwidth in reinforced concrete flexural members", Mater. Struct., 18(104), 123-133. https://doi.org/10.1007/BF02473379
  22. Dominguez, N., Brancherie, D., Davenne, L. and Ibrahimbegovic, A. (2005), "Prediction of crack pattern distribution in reinforced concrete by coupling a strong discontinuity model of concrete cracking and a bond-slip of reinforcement model", Int. J. Comput. Aid. Eng. Softw., 22(5-6), 558-582. https://doi.org/10.1108/02644400510603014
  23. Fama, E.F. and Roll, R. (1968), "Some properties of symmetric stable distributions", J. Am. Stat. Assoc., 63(323), 817-836. https://doi.org/10.2307/2283875
  24. Ibrahimbegovic, A., Boulkertous, A., Davenne, L. and Brancherie, D. (2010), "Modelling of reinforced-concrete structures providing crack-spacing based on X-FEM, ED-FEM and novel operator split solution procedure", Int. J. Numer. Meth. Eng., 83, 452-481.
  25. Ibrahimbegovic, A., Colliat, J.B., Hautefeuille, M., Brancherie, D. and Melnyk, S. (2011), "Probability based size effect representation for failure of civil engineering structures built of heterogeneous materials", Comput. Meth. Stoch. Dyn., 22, 289-311.
  26. Kogon, S.M. and Williams, D.B. (1995), "On the characterization of impulsive noise with alpha-stable distributions using fourier techniques", 29th Asilomar Conf. Signals, Syst. Comput.
  27. Koutrouvelis, I.A. (1980), "Regression-type estimation of the parameters of stable laws", J. Am. Stat. Assoc., 75(372), 918-928. https://doi.org/10.1080/01621459.1980.10477573
  28. Ma, X. and Nikias, C.L. (1995), "Parameter estimation and blind channel identification in impulsive signal environments", IEEE T. Signal Proces., 43(12), 2884-2897. https://doi.org/10.1109/78.476432
  29. MacGregor, J.G. (1997), Reinforced concrete: Mechanics and design, Third Edition, Prentice Hall Inc., New Jersey.
  30. Maymon, S., Friedmann, J. and Messer, H. (2000), "A new method for estimating parameters of a skewed alpha-stable distribution", Proceedings of the Acoustics, Speech, and Signal Processing 2000 (ICASSP '00), IEEE International Conference, 6, 3822-3825.
  31. Mandelbrot, B. and Taleb, N. (2006), "A focus on the exceptions that prove the rule", Financial Times.
  32. McCulloch, J.H. (1986), "Simple consistent estimators of stable distribution parameter", Commun. Stat.-Simul., 15(4), 1109-1136. https://doi.org/10.1080/03610918608812563
  33. Neild, S.A., Williams, M.S. and McFadden, P.D. (2002), "Non-linear behaviour of reinforced concrete beams under low-amplitude cyclic and vibration loads", Eng. Struct., 24(6), 707-718. https://doi.org/10.1016/S0141-0296(01)00134-1
  34. Nilson, A.H and Winter, G. (1986), Design of concrete structures, Tenth Edition, McGraw-Hill Book Company, New York.
  35. Nolan, J.P. (2009), Stable distributions: Models for heavy tailed data, Boston: BirkhAauser, Unfinished manuscript, Chapter 1 online at academic2.american.edu/>>jpnolan.
  36. Park, R. and Paulay, T. (1975), Reinforced concrete structures, John Wiley and Sons, A Wiley-InterScience Publication, New York.
  37. Pillai, U. and Menon, D. (2009), Reinforced concrete design, Third edition, Tata McGraw-Hill, New Delhi.
  38. Prigogine, I. (1967), Introduction to thermodynamics of irreversible processes, Third Edition, Interscience Publishers, New York.
  39. Prigogine, I. (1978), "Time, structure, and fluctuations", Sci., 201(4358), 777-785. https://doi.org/10.1126/science.201.4358.777
  40. Rubi, J.M. (2008), "The long arm of the second law", Scientific American, 62-67.
  41. Sluys, L.J. and de Borst, R. (1996), "Failure in plain and reinforced concrete - an analysis of crack width and crack spacing", Int. J. Solid. Struct., 33(20-22), 3257-3276. https://doi.org/10.1016/0020-7683(95)00258-8
  42. Tsihrintzis, G.A. and Nikias, C.L. (1996), "Fast estimation of the parameters of alpha-stable impulsive interference", IEEE T. Signal Proces., 44(6), 1492-1503. https://doi.org/10.1109/78.506614
  43. Xiu, D. and Karniadakis, G.E. (2002), "The wiener-askey polynomial chaos for stochastic differential equations", SIAM J. Sci. Comput., 24(2), 619-644. https://doi.org/10.1137/S1064827501387826
  44. Yang, C.Y., Hsu, K.C. and Chen, K.C. (2009), "The use of the levy-stable distribution for geophysical data analysis", Hydrogeol. J., 17:1265-1273. https://doi.org/10.1007/s10040-008-0411-1

피인용 문헌

  1. Prediction of negative peak wind pressures on roofs of low-rise building vol.19, pp.6, 2014, https://doi.org/10.12989/was.2014.19.6.623