DOI QR코드

DOI QR Code

Numerical study on bearing behavior of pile considering sand particle crushing

  • Wu, Yang (Graduate School for International Development and Cooperation, Hiroshima University) ;
  • Yamamoto, Haruyuki (Graduate School for International Development and Cooperation, Hiroshima University) ;
  • Yao, Yangping (Department of Civil Engineering, Beihang University)
  • 투고 : 2012.08.30
  • 심사 : 2013.03.20
  • 발행 : 2013.06.25

초록

The bearing mechanism of pile during installation and loading process which controls the deformation and distribution of strain and stress in the soil surrounding pile tip is complex and full of much uncertainty. It is pointed out that particle crushing occurs in significant stress concentrated region such as the area surrounding pile tip. The solution to this problem requires the understanding and modeling of the mechanical behavior of granular soil under high pressures. This study aims to investigate the sand behavior around pile tip considering the characteristics of sand crushing. The numerical analysis of model pile loading test under different surcharge pressure with constitutive model for sand crushing is presented. This constitutive model is capable of predicting the dilatancy of soil from negative to positive under low confining pressure and only negative dilatancy under high confining pressure. The predicted relationships between the normalized bearing stress and normalized displacement are agreeable with the experimental results during the entire loading process. It is estimated from numerical results that the vertical stress beneath pile tip is up to 20 MPa which is large enough to cause sand to be crushed. The predicted distribution area of volumetric strain represents that the distributed area shaped wedge for volumetric contraction is beneath pile tip and distributed area for volumetric expansion is near the pile shaft. It is demonstrated that the finite element formulation incorporating a constitutive model for sand with crushing is capable of producing reasonable results for the pile loading problem.

키워드

참고문헌

  1. Daouadji, A., Hicher, P.Y. and Rahma, A. (2001), "An elastoplastic model for granular materials taking into account grain breakage", Eur. J. Mech. A-Solid., 20(1), 113-137. https://doi.org/10.1016/S0997-7538(00)01130-X
  2. Daouadji, A. and Hicher, P.Y. (2010), "An enhanced constitutive model for crushable granular materials", Int. J. Numer. Anal. Meth. Geomech., 34(6), 555-580.
  3. Dijkstra, J., Broere, W. and Heeres, O.M. (2011), "Numerical simulation of pile intallation", Comput. Geotech., 38(5),612-622. https://doi.org/10.1016/j.compgeo.2011.04.004
  4. Dijkstra, J., Broere, W. and Van, A.F. (2006), "Numerical investigation into stress and strain development around a displacement pile in sand", Proceedings of the Sixth European Conference on Numerical Methods in Geotechnical Engineering, Graz, Austria, September, 595-600.
  5. Fukumoto, T. (1992), "Particle breakage characteristics of granular soils", Soils Found., 32(1), 26-40.
  6. Hardin, B.O. (1985), "Crushing of soil particles", J. Geotech. Geoenviron. Eng., 111(10), 1177-1192. https://doi.org/10.1061/(ASCE)0733-9410(1985)111:10(1177)
  7. Kikumoto, M., Wood, D.M. and Russell, A. (2010), "Particle crushing and deformation behaviour", Soils Found., 50(4), 547-563. https://doi.org/10.3208/sandf.50.547
  8. Kuwajima, K., Hyodo, M. and Hyde, A.F.L. (2009), "Pile bearing capacity factors and soil crushability", J. Geotech. Geoenviron. Eng., 135(7), 901-913 https://doi.org/10.1061/(ASCE)GT.1943-5606.0000057
  9. Lade, P.V., Yamamuro, J.A. and Bopp, P.A. (1996), "Significance of particle crushing in granular materials", J. Geotech. Geoenviron. Eng., 122(4), 309-316. https://doi.org/10.1061/(ASCE)0733-9410(1996)122:4(309)
  10. Li, W. and Yamamoto, H. (2005), "Numerical analysis on soil behavior around pile-tip under vertical load", J. Struct. Eng., 51(B), 147-157. [In Japanese]
  11. Lobo-Guerrero, S. and Vallejo, L.E. (2005), "DEM analysis of crushing around driven piles in granular materials", Geotechnique, 55(8), 617-623. https://doi.org/10.1680/geot.2005.55.8.617
  12. Lobo-Guerrero, S. and Vallejo, L.E. (2007), "Influence of pile shape and pile interaction on the crushable behavior of granular materials around driven piles: DEM analyses", Granu. Matter., 9(3-4), 241-250. https://doi.org/10.1007/s10035-007-0037-3
  13. Mahmound, H., Hosein, S. and Habib, S. (2008), "Dilation and particle breakage effects on the shear strength of calcareous sands based on energy aspects", Int. J. Civ. Eng., 6(2), 108-117.
  14. Miura, N. and Yamanouchi, T. (1971), "Drained shear characteristics of standard sand under high confining pressures", Proceedings of Japan Society of Civil Engineering, 193, 69-79. [In Japanese]
  15. Miura, N., Murata, H. and Yasufuku, N. (1984), "Stress-strain characteristics of sand in a particle-crushing region", Soils Found., 24(1), 77-89. https://doi.org/10.3208/sandf1972.24.77
  16. Nakai, T. (1989), "An isotropic hardening elastoplastic model for sand considering the stress path dependency in three-dimensional stresses", Soils Found., 29(1), 119-137. https://doi.org/10.3208/sandf1972.29.119
  17. Nazem, M., Sheng, D.C. and Carter, J.P. (2006), "Stress integration and mesh refinement for large deformation in geomechanics", Int. J. Numer. Meth. Engng, 65(7), 1002-1027. https://doi.org/10.1002/nme.1470
  18. Simonini, P. (1996), "Analysis of behavior of sand surrounding pile tips", J. Geotech. Geoenviron. Eng., 122(11), 897-905. https://doi.org/10.1061/(ASCE)0733-9410(1996)122:11(897)
  19. Sun, D.A., Huang, W.X., Sheng, D.C. and Yamamoto, H. (2007), "An elastoplastic model for granular meterials exhibiting particle crushing", Key Eng. Mater., 340-341, 1273-1278. https://doi.org/10.4028/www.scientific.net/KEM.340-341.1273
  20. Yamamoto, H., Li, W., Tominaga, K. and Ogura, H. (2003), "Experimental study on effects of overburdening pressures and end shapes for point bearing capacities of pile", J. Struct. Eng., 49(B),157-162. [In Japanese]
  21. Yao, Y.P., Sun, D.A. and Matsuoka, H. (2008a), "A unified constitutive model for both clay and sand with hardening parameter independent on stress path", Comput. Geotech., 35(2), 210-222. https://doi.org/10.1016/j.compgeo.2007.04.003
  22. Yao, Y.P., Yamamoto, H. and Wang, N.D. (2008b), "Constitutive model considering sand crushing", Soils Found., 48(4), 603-608. https://doi.org/10.3208/sandf.48.603
  23. Yasufuku, N. and Hyde, A.F.L. (1995), "Pile end-bearing capacity in crushable sands", Geotechnique, 45(4), 663-676. https://doi.org/10.1680/geot.1995.45.4.663
  24. Yasufuku, N., Ochiai, H. and Ohno, S. (2001), "Pile end-bearing capacity of sand related to soil compressibility", Soils Found., 41(4), 59-71. https://doi.org/10.3208/sandf.41.4_59

피인용 문헌

  1. Large-scale pilot test study on bearing capacity of sea-crossing bridge main pier pile foundations vol.7, pp.2, 2014, https://doi.org/10.12989/gae.2014.7.2.201
  2. Dynamic analyses and field observations on piles in Kolkata city vol.8, pp.3, 2015, https://doi.org/10.12989/gae.2015.8.3.415
  3. An analytical solution for geotextile-wrapped soil based on insights from DEM analysis vol.45, pp.4, 2017, https://doi.org/10.1016/j.geotexmem.2017.05.001
  4. Dynamic lateral response of under-reamed vertical and batter piles vol.158, 2018, https://doi.org/10.1016/j.conbuildmat.2017.10.042
  5. Experimental investigation on the mechanical properties of methane hydrate-bearing sand formed with rounded particles vol.45, 2017, https://doi.org/10.1016/j.jngse.2017.05.008
  6. Effect of relative density on the shear behaviour of granulated coal ash vol.10, pp.2, 2016, https://doi.org/10.12989/gae.2016.10.2.207
  7. Undrained monotonic and cyclic shear response and particle crushing of silica sand at low and high pressures vol.54, pp.2, 2017, https://doi.org/10.1139/cgj-2016-0212
  8. Influences of particle characteristic and compaction degree on the shear response of clinker ash vol.230, 2017, https://doi.org/10.1016/j.enggeo.2017.09.019
  9. Crushing tests of soil particles by high pressure true tri-axial compression apparatus vol.1, pp.2, 2015, https://doi.org/10.3208/jgssp.jpn-26
  10. Finite element analyses of the stability of a soil block reinforced by shear pins vol.12, pp.6, 2013, https://doi.org/10.12989/gae.2017.12.6.1021
  11. Experimental study on crushable coarse granular materials during monotonic simple shear tests vol.15, pp.1, 2013, https://doi.org/10.12989/gae.2018.15.1.687
  12. Three-dimensional finite element modelling and dynamic response analysis of track-embankment-ground system subjected to high-speed train moving loads vol.19, pp.3, 2019, https://doi.org/10.12989/gae.2019.19.3.241
  13. Effect of stress paths on the particle crushing vol.8, pp.6, 2013, https://doi.org/10.3208/jgssp.v08.j10
  14. Influence of Load Mode on Particle Crushing Characteristics of Silica Sand at High Stresses vol.20, pp.3, 2013, https://doi.org/10.1061/(asce)gm.1943-5622.0001600
  15. Factors affecting particle breakage of calcareous soil retrieved from South China Sea vol.22, pp.2, 2013, https://doi.org/10.12989/gae.2020.22.2.173
  16. Mechanical Characteristics of the Hydrate-Bearing Sediments in the South China Sea Using a Multistage Triaxial Loading Test vol.35, pp.5, 2013, https://doi.org/10.1021/acs.energyfuels.1c00118
  17. New Simple Breakage Index for Crushable Granular Soils vol.21, pp.8, 2013, https://doi.org/10.1061/(asce)gm.1943-5622.0002091
  18. Semi-Automated Procedure to Estimate Nonlinear Kinematic Hardening Model to Simulate the Nonlinear Dynamic Properties of Soil and Rock vol.11, pp.18, 2013, https://doi.org/10.3390/app11188611