References
- F. Moses, "Weigh-In-Motion System Using Instrumented Bridges", Transportation Engineering Journal, ASCE, Vol. 105, pp. 223-249, 1979.
- Yusuke KOBAUASHI, "Development of an Automatic Continuous Real-time Remote Monitoring System for Bridge Maintenance", Tokyo Institute of Technology, pp. 28-32, 2004.
- R.J. Peters, "CULWAY-an Unmanned and Undetectable Highway Speed Vehicle Weighing System", Proceedings of the 13th ARRB Conference, Australian Road Research Board, pp. 70-83, 1986.
- A. Znidaric and F. Moses, "Bridge Weigh-In-Motion Testing of Vehicle Gross Weights in Slovenia", the First European WIM Conference, Zurich, March, pp. 55-62, 1995.
- A. T. Dempsey, E. J. O'Brien and J. M. O'Connor, "A Bridge Weigh-In-Motion System for the Determination of Gross Vehicle Weights", In Post-Proceedings of the 1st European Conference on Weigh-In-Motion of Road Vehicles, Zurich, pp. 239-249, 1995.
- E. S. Hwang, D. B. Bae, K. S. Jung and J. B. Jo, "Analysis of Truck Traffic Characteristic using BWIM System", J. of Korean Society of Steel Construction, Vol. 11, No. 2, pp. 223-232, 1999.
- M. S. Park, B. W. Jo and D. B Bae, "Development of Statistical Truck Load Model for Highway Bridge using BWIM System", J. of the Korean Society of Civil Engineers, Vol. 26, No. 1, pp. 143-146, 2006.
- M. S. Park and B. W. Jo, "The Development of Bridge Weigh-in-Motion System for the Measurement of Traffic Load", J. of the Korea Institute for Structural Maintenance Inspection, Vol. 10, No. 2, pp. 111-122, 2006.
- M. S. Park, "Development of Bridge Weigh-in-Motion Systems without Axle Detector Using Artificial Neural Network", Hanyang University, pp. 120-130, 2008.
- B. H. Kim, M. S. Park, K. S. Yeo and S. J. Kim, "Sensitivity-based BWIM System Using Dynamic Strain Responses of Bridge Deck Plate", Proceedings of Annual Conference the Korean Society for Noise and Vibration Engineering, Vol. 2010, No. 7, pp. 620-623, 2010.
- A. R. Han and S. B. Shin, "Application for a BWIM Algorithm Using Density Estimation Function and Average Modification Factor in The Field Test", J. of the Korea Institute for Structural Maintenance Inspection, Vol. 15, No. 2, pp. 70-71, 2011. https://doi.org/10.11112/jksmi.2011.15.2.070
- J. W. Jeong and S. B. Shin, "Development of Moving Force Identification Algorithm Using Moment Influence Lines at Multiple - Axes and Density Estimation Function", J. of the Korea Institute for Structural Maintenance Inspection, Vol. 10, No. 6, pp. 87-90, 2006.
- J. W. Lee, "Analysis of BWIM Signal Variation Due to Different Vehicle Travelling Conditions Using Field Measurement and Numerical Analysis", J. of the Computational Structural Engineering Institute of Korea, Vol. 24, No. 1, pp. 79-85, 2011.
- Michael Quilligan, "Bridge Weigh-in-Motion", Royal Institute of Technology, pp. 85-89, 2003.
- Ministry of Land, Transport and Maritime Affairs, "Revision of Highway Bridge Design Manual Chapter 5 Bridge", pp. 506-68-506-147, 2000.
- H. H. Lee, "Impact Factor of Moving Load due to Surface Roughness of Girder Bridge of Variable Span", M. Thesis, Asian Institute of Technology, pp. 12-16, 1985.
- H. H. Lee, "A Study on Dynamic Behavior of Highway Girder Bridges", Hanyang University, pp. 624-635, 1990.
- D. I. Chang and H. H. Lee, "Impact Factor for Simple Span Highway Girder Bridges", J. of Structural Engineering, ASCE, Vol. 120, No. 3, pp. 704-715, 1994. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:3(704)
- H. H. Lee, J. C. Jeon and K. S. Kyung, "Determination of a Reasonable Impact Factor for Fatigue Investigation of Simple Steel Plate Girder Railway Bridges", Engineering Structures, 36, pp. 316-324, 2012. https://doi.org/10.1016/j.engstruct.2011.12.021
- H. H. Lee, "Investigation of Fatigue Life Evaluation Method and Impact Factor for Fatigue Design of Steel Highway Girder Bridges", Hosei University. pp. 1-6, 2007.
- J. C. Jeon, K. S. Kyung, S. W. Kang and H. H. Lee, "Applicability of Vertical Stiffener Response of Plate Girder Bridge to BWIM System", J. of the Korean Society of Civil Engineers, Vol. A, pp. 40, 2011.
- H. H. Lee, J. C. Jeon, M. S. Jung and K. S. Kyung, "Identification of Running Vehicle Properties by Vertical Stiffener Response of Steel Girder Bridge", J. of the Korean Society of Safety, Vol. 27, No. 1, pp. 86-90, 2012.
- K. I. Cho, J. H. Won, S. H. Kim and Y. C. Lu, "A Temperature Predicting Method for Thermal Behaviour Analysis of Curved Steel Box Girder Bridges", J. of the Korean Society of Civil Engineers, Vol. 28, No. 1, pp. 106-108, 2008.
- S. H. Kim, K. I. Cho, Y. C. Lu and J. H. Hong, "Behavior of Steel Box Girder Curved Bridge Considering Solar Radiation and Solar Alitude", J. of the Korean Society of Civil Engineers, Vol. 2004, No. 10, pp. 54-58, 2004.
- Committee of Bridge Vibration, "Field Test and Analysis of Bridge Vibration", JSCE, pp. 103-126, 1993.
- M. S. Jung, "A Study on the Utilization of BWIM Using Theoretical Response of Bridge", Korea Maritime University, pp. 63-74, 2012.
Cited by
- A Study on Influencing Factors in BWIM System and Its Field Applicability vol.26, pp.4, 2014, https://doi.org/10.7781/kjoss.2014.26.4.251