Smart Structures and Systems

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Wireless health monitoring of stay cable using piezoelectric strain response and smart skin technique

  • Kim, Jeong-Tae (Department of Ocean Engineering, Pukyong National University) ;
  • Nguyen, Khac-Duy (Department of Ocean Engineering, Pukyong National University) ;
  • Huynh, Thanh-Canh (Department of Ocean Engineering, Pukyong National University)
  • Received : 2013.01.29
  • Accepted : 2013.06.20
  • Published : 2013.09.25
⟨ Previous Next ⟩

Abstract

In this paper, wireless health monitoring of stay cables using piezoelectric strain sensors and a smart skin technique is presented. For the cables, tension forces are estimated to examine their health status from vibration features with consideration of temperature effects. The following approaches are implemented to achieve the objective. Firstly, the tension force estimation utilizing the piezoelectric sensor-embedded smart skin is presented. A temperature correlation model to recalculate the tension force at a temperature of interest is designed by correlating the change in cable's dynamic features and temperature variation. Secondly, the wireless health monitoring system for stay cables is described. A piezoelectric strain sensor node and a tension force monitoring software which is embedded in the sensor are designed. Finally, the feasibility of the proposed monitoring technique is evaluated on stay cables of the Hwamyung Grand Bridge in Busan, Korea.

Keywords

Acknowledgement

Supported by : Pukyong National University

References

  1. Bhalla, S. and Soh, C.K. (2003), "Structural impedance based damage diagnosis by piezo-transducers", Earthq. Eng. Struct. D., 32(12), 1897-1916. https://doi.org/10.1002/eqe.307
  2. Bendat, J.S. and Piersol, A.G. (1993), Engineering applications of correlation and spectral analysis, New York, NY, Wiley-Interscience.
  3. Chen, C.C., Wu, W.H. and Liu, C.Y. (2012), "Effects of temperature variation on cable forces of an extradosed bridge", Proceeding of the 6th European Workshop on Structural Health Monitoring, Germany.
  4. Cho, S., Lynch, J.P., Lee, J.J. and Yun, C.B. (2010), "Development of an automated wireless tension force estimation system for cable-stayed bridges", J. Intell. Mat. Syst. Str., 21(1), 361-375. https://doi.org/10.1177/1045389X09350719
  5. Kim, B.H. and Park, T. (2007), "Estimation of cable tension force using the frequency-based system identification method", J. Sound Vib., 304, 660-676. https://doi.org/10.1016/j.jsv.2007.03.012
  6. Kim, J.T., Yun, C.B. and Yi, J.H. (2003), "Temperature effects on frequency-based damage detection in plate-girder bridges", J. Civil Eng. - KSCE, 7(6), 725-733. https://doi.org/10.1007/BF02829141
  7. Kim, J.T., Na W.B., Park, J.H. and Hong, D.S. (2006), "Hybrid health monitoring of structural joints using modal parameters and EMI signatures", Proceedings of the SPIE, San Diego, USA.
  8. Kim, J.T., Park, J.H. and Lee B.J. (2007), "Vibration-based damage monitoring in model plate-girder bridges under uncertain temperature conditions", Eng. Struct., 29, 1354-1365. https://doi.org/10.1016/j.engstruct.2006.07.024
  9. Kim, J.T., Park, J.H., Hong, D.S. and Ho, D.D. (2011), "Hybrid acceleration-impedance sensor nodes on Imote2-platform for damage monitoring in steel girder connections", Smart Struct. Syst., 7(5), 393-416. https://doi.org/10.12989/sss.2011.7.5.393
  10. Ho, D.D., Lee, P.Y., Nguyen, K.D., Hong, D.S., Lee, S.Y., Kim, J.T., Shin, S.W., Yun, C.B. and Shinozuka, M. (2012), "Solar-powered multi-scale sensor node on Imote2 platform for hybrid SHM in cable-stayed bridge", Smart Struct. Syst., 9(2), 145-164. https://doi.org/10.12989/sss.2012.9.2.145
  11. Hong, D.S., Nguyen, K.D., Lee, I.C. and Kim, J.T. (2012), "Temperature-compensated damage monitoring by using wireless acceleration-impedance sensor nodes in steel girder connection", Int. J. Distrib. Sens. N., 2012, 1-12.
  12. Li, H., Ou, J. and Zhou, Z. (2009), "Applications of optical fibre Bragg gratings sensing technology-based smart stay cables", Opt. Laser. Eng., 47, 1077-1084. https://doi.org/10.1016/j.optlaseng.2009.04.016
  13. Liang, C., Sun, F.P. and Rogers, C.A. (1996), "Electro-mechanical impedance modeling of active material systems", Smart Mater. Struct., 5(2), 171-186. https://doi.org/10.1088/0964-1726/5/2/006
  14. Lynch, J.P. and Loh, K.J. (2006), "A summary review of wireless sensors and sensor networks for structural health monitoring", Shock Vib., 38(2), 91-128. https://doi.org/10.1177/0583102406061499
  15. Ma, C.C. and Wang, C.W. (2009), "Transient strain measurements of a suspended cable under impact loadings using fiber bragg grating sensors", IEEE Sens. J., 9(12), 1998-2007. https://doi.org/10.1109/JSEN.2009.2031327
  16. Miller, T.I., Spencer, B.F., Li, J. And Jo, H. (2010), Solar energy harvesting and software enhancements for autonomous wireless smart sensor networks, NSEL Report Series, NSEL-022.
  17. Nagayama, T., Sim, S.H., Miyamori, Y. and Spencer, B.F. (2007), "Issues in structural health monitoring employing smart sensors", Smart Struct. Syst., 3(3), 299-320. https://doi.org/10.12989/sss.2007.3.3.299
  18. Ni, Y.Q., Hua, X.G., Fan, K.Q. and Ko, J.W. (2005), "Correlating modal properties with temperature using long-term monitoring data and support vector machine technique", Eng. Struct., 27, 1762-1773. https://doi.org/10.1016/j.engstruct.2005.02.020
  19. Nguyen, K.D and Kim, J.T. (2012), "Smart PZT-interface for wireless impedance-based prestress-loss monitoring in tendon anchorage connection", Smart Struct. Syst., 9(6), 489-504. https://doi.org/10.12989/sss.2012.9.6.489
  20. Nguyen, K.D., Ho, D.D. and Kim, J.T. (2013), "Damage detection in beam-type structures via PZT's dual piezoelectric responses", Smart Struct. Syst., 11(2), 217-240. https://doi.org/10.12989/sss.2013.11.2.217
  21. Park, G., Sohn, H., Farrar, C. and Inman, D. (2003), "Overview of piezoelectric impedance-based health monitoring and path forward", Shock Vib., 35(6), 451-463. https://doi.org/10.1177/05831024030356001
  22. Park, G., Cudney, H.H. and Inman, D.J. (2001), "Feasibility of using impedance-based damage assessment for pipeline structures", Earthq. Eng. Struct. D., 30(10), 1463-1474. https://doi.org/10.1002/eqe.72
  23. Rice, J.A., Mechitov, K., Sim, S.H., Nagayama, T., Jang, S., Kim, R., Spencer, Jr, B.F., Agha, G. and Fujino, Y. (2010), "Flexible smart sensor framework for autonomous structural health monitoring", Smart Struct. Syst., 6(5-6), 423-438. https://doi.org/10.12989/sss.2010.6.5_6.423
  24. Rice, J.A. and Spencer, B.F. (2009), Flexible smart sensor framework for autonomous full-scale structural health monitoring, NSEL Report Series, NSEL-018.
  25. Sim, S.H., Li, J, Jo, H., Park, J., Cho, S. and Spencer, B.F. (2011), "Automated cable tension monitoring using smart sensors", Proceedings of the Advances in Structural Engineering and Mechanics, Korea.
  26. Sirohi, J. and Chopra, I. (2000), "Fundamental understanding of piezoelectric strain sensors", J. Intell. Mat. Syst. Str., 11, 246-257. https://doi.org/10.1106/8BFB-GC8P-XQ47-YCQ0
  27. Shimada, T. (1995), A study on the maintenance and management of the tension measurement for the cable of bridge, PhD Dissertation, Kobe University, Japan.
  28. Spencer, B.F., Ruiz-Sandoval, M.E. and Kurata, N. (2004), "Smart sensing technology: opportunities and challenges", Struct. Health Monit., 11, 349-368. https://doi.org/10.1002/stc.48
  29. Treyssede, F. (2009), "Free linear vibrations of cables under thermal stress", J. Sound Vib., 327(1-2), 1-8. https://doi.org/10.1016/j.jsv.2009.07.005
  30. Zui, H., Shinke, T. and Namita, Y. (1996), "Practical formulas for estimation of cable tension by vibration method", J. Struct. Eng. - ASCE, 122(6), 651-656. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:6(651)

Cited by

  1. FOS-Based Prestress Force Monitoring and Temperature Effect Estimation in Unbonded Tendons of PSC Girders vol.30, pp.2, 2017, https://doi.org/10.1061/(ASCE)AS.1943-5525.0000608
  2. Wireless structural health monitoring of stay cables under two consecutive typhoons vol.1, pp.1, 2014, https://doi.org/10.12989/smm.2014.1.1.047
  3. Development and Application of a Structural Health Monitoring System Based on Wireless Smart Aggregates vol.17, pp.7, 2017, https://doi.org/10.3390/s17071641
  4. Compensation of temperature effect on impedance responses of PZT interface for prestress-loss monitoring in PSC girders vol.17, pp.6, 2016, https://doi.org/10.12989/sss.2016.17.6.881
  5. Development and Application of Structural Health Monitoring System Based on Piezoelectric Sensors vol.9, pp.11, 2013, https://doi.org/10.1155/2013/270927
  6. Development of a dynamic sensing system for civil revolving structures and its field tests in a large revolving auditorium vol.13, pp.6, 2014, https://doi.org/10.12989/sss.2014.13.6.993
  7. Advances and challenges in impedance-based structural health monitoring vol.4, pp.4, 2013, https://doi.org/10.12989/smm.2017.4.4.301
  8. PCA-based filtering of temperature effect on impedance monitoring in prestressed tendon anchorage vol.22, pp.1, 2018, https://doi.org/10.12989/sss.2018.22.1.057
  9. Preload Monitoring in Bolted Connection Using Piezoelectric-Based Smart Interface vol.18, pp.9, 2013, https://doi.org/10.3390/s18092766
  10. A review on sensors and systems in structural health monitoring: current issues and challenges vol.22, pp.5, 2018, https://doi.org/10.12989/sss.2018.22.5.509
  11. Automated Real-Time Assessment of Stay-Cable Serviceability Using Smart Sensors vol.9, pp.20, 2013, https://doi.org/10.3390/app9204469
  12. Cable Force Identification Based on Bending Waves in Substructures vol.2020, pp.None, 2013, https://doi.org/10.1155/2020/8878806
  13. Development of Smart Sensing Technology Approaches in Structural Health Monitoring of Bridge Structures vol.2021, pp.None, 2013, https://doi.org/10.1155/2021/2615029
  14. Piezoelectric Sensor-Embedded Smart Rock for Damage Monitoring in a Prestressed Anchorage Zone vol.21, pp.2, 2013, https://doi.org/10.3390/s21020353
  15. Fully automated peak-picking method for an autonomous stay-cable monitoring system in cable-stayed bridges vol.126, pp.None, 2021, https://doi.org/10.1016/j.autcon.2021.103628
  16. Automated wireless monitoring system for cable tension forces using deep learning vol.20, pp.4, 2013, https://doi.org/10.1177/1475921720935837
  17. Research on Non-Contact and Non-Fixed Cable Force Measurement Based on Smartphone vol.11, pp.19, 2021, https://doi.org/10.3390/app11198902
  18. Fiber-optic wireless sensor network using ultra-weak fiber Bragg gratings for vertical subsurface deformation monitoring vol.109, pp.3, 2013, https://doi.org/10.1007/s11069-021-04932-1
  19. Magnetoelastic Ribbons as Vibration Sensors for Real-Time Health Monitoring of Rotating Metal Beams vol.21, pp.23, 2021, https://doi.org/10.3390/s21238122