References
- Achenbach, J.D. (1973), Wave propagation in Elastic Solids: North-Holland series, in Applied Mathematics and Mechanics.
- Alleyne, D.N. and Cawley, P. (1992), "The interaction of Lamb waves with defects", IEEE T. Ultrason. Ferr., 39(3), 381-397. https://doi.org/10.1109/58.143172
- Castaings, M. (2002), Controle et evaluation non destructifs de materiaux par ondes ultrasonores guidees, Ph.D. thesis, Universite de Bordeaux 1.
- Daubechies, I. (1992), Ten lectures on wavelets, Philadelphia, PA: Society for Industrial and Applied Mathematics, ISBN-10: 0898712742
- Dietzhausen, H., Dong, M. and Schmauder, S. (1998), "Numerical simulation of acoustic emisssion in fiber reinforced polymer", Comput. Mater. Sci., 13, 23-30. https://doi.org/10.1016/S0927-0256(98)00042-1
- Dieulesaint, E. and Royer, D. (1996), Ondes elastiques dans les solides- Tome 1: Propagation libre et guidee, Paris: Masson.
- Frankenstein, B., Hentschel, D. and Schubert, F. (2006), Monitoring network for SHM in avionic applications, ECNDT - Th1.7.3.
- Giurgiutiu, V. (2005), "Tuned Lamb-wave excitation and detection with piezoelectric wafer active sensors for structural health monitoring", J. Intell. Mater. Syst. Struct., 16(4), 291-306. https://doi.org/10.1177/1045389X05050106
- Giurgiutiu, V. (2008), Structural health monitoring with piezoelectric wafer active sensors, Elsevier Academic Press, 760, ISBN 978-0120887606,
- Giurgiutiu, V., Gresil, M., Lin, B., Cuc, A., Shen, Y. and Roman, C. (2012), "Predictive modeling of piezoelectric wafer active sensors interaction with high-frequency structural waves and vibration", Acta Mech., doi: 10.1007/s00707-012-0633-0.
- Gorman, M.R. and Proser, W.H. (1991), "AE source by plate analysis", J. Acoustic Emission, 9(4), 238-288.
- Graff, K.F. (1975), Wave motion in elastic solids, Oxford University Press:London, ISBN-10:0486667456.
- Grahn, T. (2003), "Lamb wave scattering from a circular partly through-thickness hole in a plate", Wave Motion, 37(1), 63-80. https://doi.org/10.1016/S0165-2125(02)00051-3
- Gresil, M., Lin, B., Shen, Y. and Giurgiutiu, V. (2011a), "Predictive modeling of space structures for SHM with PWAS transducers", Proceedings of the ASME Conference (54723), 525-534.
- Gresil, M., Shen, Y. and Giurgiutiu, V. (2011b), "Predictive modeling of ultrasonics SHM with PWAS transducers", Proceedings of the 8th International Workshop on Structural Health Monitoring, San-Francisco, CA, USA.
- Gresil, M., Shen, Y. and Giurgiutiu, V. (2012), "Benchmark problems for predictive FEM simulation of 1-D and 2-D guided wave for structural health monitoring with piezoelectric wafer active sensors", Proceedings of the Review of Progress in Quantative Nondestructive Evaluation AIP Conf., 1430(1), 1835-1842, doi: 10.1063/1.4716434.
- Greve, D.W., Zheng, P. and Oppenheim, I.J. (2008), "The transition from Lamb waves to longitudinal waves in plates", Smart Mater. Struct., 17(3), 035029.
- Grondel, S., Assaad, J., Delebarre, C., Blanquet, P. and Moulin, E. (1999), "The propagation of lamb waves in multilayered plates: phase-velocity measurement", Meas. Sci. Technol., 10(5), 348-353. https://doi.org/10.1088/0957-0233/10/5/002
- Grondel, S., Delebarre, C., Assaad, J., Dupuis, J.P. and Reithler, L. (2002), "Fatigue crack monitoring of riveted aluminium strap joints by Lamb wave analysis and acoustic emission measurement techniques", NDT & E Int., 35(3), 137-146. https://doi.org/10.1016/S0963-8695(01)00027-5
- Han, S. (2007), Finite element analysis of lamb waves acting within a thin aluminum plate, Thesis, Department of Aeronautical and Astronautical Engineering, Air Force Institute of Technology.
- Harker, A.H. (1987), Elastic waves in solids. Bristol: British gas/Adam Hilger.
- Hill, R., Forsyth, S.A. and Macey, P. (2004), "Finite element modeling of ultrasound, with reference to transducers and AE waves", Ultrasonics, 42(1-9), 253-258. https://doi.org/10.1016/j.ultras.2004.01.018
- Lamb, H. (1917), "On waves in an elastic plate", P. Roy. Soc. London. Series A, 93(648), 114-128. https://doi.org/10.1098/rspa.1917.0008
- Lee, C.K., Scholey, J.J., Wilcox, P.D., Wisnom, M.R., Friswell, M.I. and Drinkwater, B.W. (2006), "Guided wave acoustic emission from fatigue crack growth in aluminum plate", Adv. Mater. Res., 13, 23-28.
- Lemistre, M. and Balageas, D. (2001), "Structural health monitoring system based on diffracted Lamb wave analysis by multi-resolution processing", Smart Mater. Struct., 10(3), 504-511. https://doi.org/10.1088/0964-1726/10/3/312
- Liu, W. and Giurgiutiu, V. (2007) "Finite element simulation of piezoelectric wafer active sensors for structural health monitoring with coupled-field elements", Proceedings of the ASME International Mechanical Engineering Congress and Exposition, IMECE 2007-43570, 715-726.
- Lowe, M.J.S. and Diligent, O. (2002), "Low-frequency reflection characteristics of the S0 Lamb wave from a rectangular notch in plate", J. Acoust. Soc. Am., 111(1), 64-74. https://doi.org/10.1121/1.1424866
- Lu, Y., Ye, L., Su, Z. and Yang, C. (2008), "Quantitative assessment of through-thickness crack size based on Lamb wave scattering in aluminum plates", NDT & E Int., 41(1), 59-68. https://doi.org/10.1016/j.ndteint.2007.07.003
- Mal, A. K. and Chang, Z. (1999), "Scattering of lamb wave from a rivet hole with edge cracks", Mech. Mater., 31, 197-204. https://doi.org/10.1016/S0167-6636(98)00060-X
- Moder, F. and Jacobs, L.J. (1998), "Application of finite element methods to study transient wave propagation in elastic waves guides", Rev. Prog. Quantitative NDE, 17, 161-167.
- Morlet, J., Arens, G., Fourgeau, I. and Giard, D. (1982), "Wave Propagation the Mixing Layer: Application of the 2-D Arc Wavelet Transform", Journal of and Sampling Theory", Geophysics, 47, 203-236.
- Rose, J.L. (1999), Ultrasonic waves in solid media, Cambridge University: Cambridge University Press.
- Santoni-Bottai, G., Yu, L., Xu, B. and Giurgiutiu, V. (2007), "Lamb wave mode tuning of piezoelectric wafer active sensors for structural health monitoring", J. Vib. Acoust., 129(6), 752-762. https://doi.org/10.1115/1.2748469
- Scruby, C.B., Baldwin, G.R. and Stacey, K.A. (1985), "Characterization of fatigue crack extension by quantitative acoustic emission", Int. J. Fracture, 28, 201-222.
- Titry, C., Terrien, N. and Lepoutre, F. (2004), Detection de la corrosion cachee dans les structures aeronautiques en aluminium Colloque Interdisciplinaire en Instrumentation (CII), Cachan, France.
- Vallen-System, GmbH. (2001), http://www.vallen.de/wavelet/index.html, Munich, Germany.
- Viktorov, I.A. (1967), Rayleigh and lamb waves - physical theory and application, New York Plenum Press.
- Wang, X., Lu, Y. and Tang, J. (2008), "Damage detection using piezoelectric transducers and the Lamb wave approach: I. System analysis", Smart Mater. Struct., 17(2), 025033. https://doi.org/10.1088/0964-1726/17/2/025033
- Wilcox, P., Lowe, M. and Cawley, P. (2001), "The effect of dispersion on long-range inspection using ultrasonic guided waves", NDT & E Int., 34(1), 1-9. https://doi.org/10.1016/S0963-8695(00)00024-4
- Yang, Y. and Hu, Y. (2008), "Electromechanical impedance modeling of PZT transducers for health monitoring of cylindrical shell structures", Smart Mater. Struct., 17(1), 015005. https://doi.org/10.1088/0964-1726/17/01/015005
- Yu, L., Giurgiutiu, V., Ziehl, P., Ozevin, D. and Pollock, P. (2010), "Steel bridges fatigue crack detection with piezoelectric wafer active sensors", Proceedings of the SPIE conference on Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems.
- Zak, A., Krawczuk, M. and Ostachowicz, W. (2006), "Propagation of in-plane waves in an isotropic panel with a crack", Finite Elem. Anal. Des., 42(11), 929-941. https://doi.org/10.1016/j.finel.2006.01.013
- Zhao, X., Gao, H., Zhang, G., Ayhan, B., Yan, F., Kwan, C. and Rose, J.L. (2007), "Active health monitoring of an aircraft wing with embedded piezoelectric sensor/actuator network: I. Defect detection, localization and growth monitoring", Smart Mater. Struct., 16(4), 1208-1217. https://doi.org/10.1088/0964-1726/16/4/032
Cited by
- Bridge damage detection using spatiotemporal patterns extracted from dense sensor network vol.28, pp.1, 2017, https://doi.org/10.1088/1361-6501/28/1/014011
- Damage Detection and Localization from Dense Network of Strain Sensors vol.2016, 2016, https://doi.org/10.1155/2016/2562949
- Smart sensing skin for detection and localization of fatigue cracks vol.24, pp.6, 2015, https://doi.org/10.1088/0964-1726/24/6/065004
- Transverse Crack Detection in 3D Angle Interlock Glass Fibre Composites Using Acoustic Emission vol.9, pp.12, 2016, https://doi.org/10.3390/ma9080699
- Structural health monitoring of cylindrical bodies under impulsive hydrodynamic loading by distributed FBG strain measurements vol.28, pp.2, 2017, https://doi.org/10.1088/1361-6501/aa4eac
- An information processing method for acoustic emission signal inspired from musical staff vol.66-67, 2016, https://doi.org/10.1016/j.ymssp.2015.06.015
- Experimental validation of Kalman filter-based strain estimation in structures subjected to non-zero mean input vol.15, pp.2, 2015, https://doi.org/10.12989/sss.2015.15.2.489
- Impact of Sensor Geometric Dimensions and Installation Accuracy on the Results of Instantaneous SHM Based on Wave Propagation Using Wafer Active Sensors vol.34, pp.1, 2013, https://doi.org/10.1061/(asce)as.1943-5525.0001217