DOI QR코드

DOI QR Code

A novel Fabry-Perot fiber optic temperature sensor for early age hydration heat study in Portland cement concrete

  • Zou, Xiaotian (Department of Biomedical Engineering and Biotechnology, University of Massachusetts) ;
  • Chao, Alice (Department of Civil and Environmental Engineering, University of Massachusetts) ;
  • Wu, Nan (Department of Electrical and Computer Engineering, University of Massachusetts) ;
  • Tian, Ye (Department of Electrical and Computer Engineering, University of Massachusetts) ;
  • Yu, Tzu-Yang (Department of Civil and Environmental Engineering, University of Massachusetts) ;
  • Wang, Xingwei (Department of Biomedical Engineering and Biotechnology, University of Massachusetts)
  • 투고 : 2012.01.29
  • 심사 : 2012.11.20
  • 발행 : 2013.07.25

초록

Concrete is known as a heterogeneous product which is composed of complex chemical composition and reaction. The development of concrete thermal effect during early age is critical on its future structural health and long term durability. When cement is mixed with water, the exothermic chemical reaction generates hydration heat, which raises the temperature within the concrete. Consequently, cracking may occur if the concrete temperature rises too high or if there is a large temperature difference between the interior and the exterior of concrete structures during early age hydration. This paper describes the contribution of novel Fabry-Perot (FP) fiber optic temperature sensors to investigate the thermal effects of concrete hydration process. Concrete specimens were manufactured under various water-to-cement (w/c) ratios from 0.40 to 0.60. During the first 24 hours of concreting, two FP fiber optic temperature sensors were inserted into concrete specimens with the protection of copper tubing to monitor the surface and core temperature change. The experimental results revealed effects of w/c ratios on surface and core temperature developments during early age hydration, as well as demonstrating that FP fiber optic sensors are capable of capturing temperature variation in the concrete with reliable performance. Temperature profiles are used for calculating the apparent activation energy ($E_a$) and the heat of hydration (H(t)) of concrete, which can help us to better understand cement hydration.

키워드

참고문헌

  1. Anton, S. and Kevin, F. (2005), Heat of hydration models for cementitious materials, Farmington Hills, MI, ETATS-UNIS, American Concrete Institute.
  2. Barr, P.J., Stanton, J.F. and Eberhard, M.O. (2005), "Effects of temperature variations on precast, prestressed concrete bridge girders", J. Bridge Eng., 10(2), 186-194. https://doi.org/10.1061/(ASCE)1084-0702(2005)10:2(186)
  3. Bhatia, V., Campbell, D., Claus,R.O. and Vengsarkar, A.M. (1997), "Simultaneous strain and temperature measurement with long-period gratings", Opt. Lett., 22(9), 648-650. https://doi.org/10.1364/OL.22.000648
  4. Cao, Y., Yim, J., Zhao, Y. and Wang, M.L. (2010), "Temperature effects on cable stayed bridge using health monitoring system: a case study", Struct. Health Monit., 10(5), 523-537.
  5. Culshaw, B., Michie, C., Gardiner, P. and McGown, A. (1996), "Smart structures and applications in civil engineering", Proceedings of the IEEE, 84(1), 78-86. https://doi.org/10.1109/5.476028
  6. da Silva, J.C.C., Martelli, C., Kalinowski, H.J., Penner, E., Canning, J. and Groothoff, N. (2007), "Dynamic analysis and temperature measurements of concrete cantilever beam using fibre Bragg gratings", Opt. Laser. Eng., 45(1), 88-92. https://doi.org/10.1016/j.optlaseng.2006.03.003
  7. Eliasson, I. (1992), "Infrared thermography and urban temperature patterns", Int. J. Remote Sens., 13(5), 869-879. https://doi.org/10.1080/01431169208904160
  8. Graham, P.C., Ballim, Y. and Kazirukanyo, J.B. (2011), "Effectiveness of the fineness of two South African Portland cements for controlling early-age temperature development in concrete", J. South African Inst.Civil Eng. 53, 39-45.
  9. Herbert, W. (2002), "Active IR-applications in civil engineering", Inf. Phys. Technol., 43(3-5), 233-238. https://doi.org/10.1016/S1350-4495(02)00145-7
  10. Inaudi, D. (2000), "Application of civil structural monitoring in Europe using fiber optic sensors", Prog. Struct. Eng. Mat. 2(3), 351-358. https://doi.org/10.1002/1528-2716(200007/09)2:3<351::AID-PSE41>3.0.CO;2-5
  11. Kesavan, K., Ravisankar, K., Parivallal, S, Sreeshylam, P. and Sridhar, S (2010), "Experimental studies on fiber optic sensors embedded in concrete", Measurement, 43(2), 157-163. https://doi.org/10.1016/j.measurement.2009.08.010
  12. Li, E. and Peng, G.D. (2008), "Wavelength-encoded fiber-optic temperature sensor with ultra-high sensitivity", Opt. Commun., 281(23), 5768-5770. https://doi.org/10.1016/j.optcom.2008.08.022
  13. Li, H. N., Li, D.S. and Song, G.B. (2004), "Recent applications of fiber optic sensors to health monitoring in civil engineering", Eng. Struct., 26(11), 1647-1657. https://doi.org/10.1016/j.engstruct.2004.05.018
  14. Ou, J. and Li, H. (2010), "Structural health monitoring in mainland China: review and future trends", Struct. Health Monit., 9(3), 219-231. https://doi.org/10.1177/1475921710365269
  15. PCA (1997), "Portland cement, concrete, and heat ofhydration", Concrete Technol. Today, 18(2).
  16. PCA (2009), Design and control of concrete mixtures, Skokie.
  17. Phan, L., Lawson, J. and Davis, F.L. (2001), "Effects of elevated temperature exposure on heating characteristics, spalling, and residual properties of high performance concrete", Mater. Struct., 34(2), 83-91. https://doi.org/10.1007/BF02481556
  18. Poole, J.L., Riding, K.A., Folliard, K.J., Juenger, M.C.G. and Schindler, A.K. (2007), "Methods for calculating activation energy for Portland cement", 104(1), 303-311.
  19. Quintela, A. (2002), "Embedded temperature-strain fibre Bragg grating sensor system validation for concrete structures", J. Opt. A - Pure App. Op., 4(6), S387. https://doi.org/10.1088/1464-4258/4/6/385
  20. Riding, K.A., Poole, J.L., Schindler, A.K., Juenger, M.C.G. and Folliard, K.J. (2006), "Evaluation of Temperature Prediction Methods for Mass Concrete Members", ACI Mater. J., 103(5), 357-365.
  21. Riding, K.A., Poole, J.L., Schindler, A.K., Juenger, M.C.G. and Folliard, K.J. (2007), "Temperature boundary condition models for concrete bridge members", ACI Mater. J., 104(4), 379-387.
  22. Roberts-Wollman, C.L., Breen, J.E. and Cawrse, J. (2002), "Measurements of thermal gradients and their effects on segmental concrete bridge", J. Bridge Eng., 7(3), 166-174. https://doi.org/10.1061/(ASCE)1084-0702(2002)7:3(166)
  23. Roque, R. and Buttlar, W.G. (1992), "The development of a measurement and analysis system to accurately determine asphalt concrete properties using the indirect tensile mode (with dicussion)", J. Assoc. Asphalt Paving Technol., 61, 304-322.
  24. Schindler, A.K. and McCullough, B.F. (2002), "Importance of concrete temperature control during concrete pavement construction in hot weather conditions", J. Transp. Res., 1813(1), 3-10.
  25. Soroka, I. and Ravina, D. (1998). "Hot weather concreting with admixtures", Cement Concrete Comp., 20(2-3), 129-136. https://doi.org/10.1016/S0958-9465(98)80005-X
  26. Sun, M., Li, Z., Liua, Q., Tang, Z. and Shen, D. (2000), "A study on thermal self-diagnostic and self-adaptive smart concrete structures", Cement Concrete Res., 30(8), 1251-1253. https://doi.org/10.1016/S0008-8846(00)00284-2
  27. Tian, Y., W. Wang, W., Wu, N., Zou, X., Guthy, C. and Wang, X. (2011), "A miniature fiber optic refractive index sensor built in a MEMS-based microchannel", Sensors, 11(1), 1078-1087. https://doi.org/10.3390/s110101078
  28. Wang, W., Wu, N., Tian, Y., Niezrecki, C. and Wang, X. (2010), "Miniature all-silica optical fiber pressure sensor with an ultrathin uniform diaphragm", Opt. Express, 18(9), 9006-9014. https://doi.org/10.1364/OE.18.009006
  29. Wu, N., Wang, W., Tian, Y., Zou, X., Maffeo, M., Niezrecki, C., Chen, J. and Wang, X. (2011), "Low-cost rapid miniature optical pressure sensors for blast wave measurements", Opt. Express, 19(11), 10797-10804. https://doi.org/10.1364/OE.19.010797
  30. Wu, N., Zou, X., Tian, Y., Fitek, J., Maffeo, M., Niezrecki, C., Chen, J. and Wang, X. (2012), "An ultra-fast fiber optic pressure sensor for blast event measurements", Meas. Sci. Technol., 23(5), 055102. https://doi.org/10.1088/0957-0233/23/5/055102
  31. Xiong, X. and Breugel, K.V. (2001), "Isothermal calorimetry study of blended cements and its application in numerical simulations", Heron, 46(3), 151-159.
  32. Xu, Q., Ruiz, J.M., Hu, J., Wang, K. and Rasmussen, R.O. (2011), "Modeling hydration properties and temperature developments of early-age concrete pavement using calorimetry tests", Thermochim. Acta, 512(1-2), 76-85. https://doi.org/10.1016/j.tca.2010.09.003
  33. Yuan, Y. and Wan, Z.L. (2002), "Prediction of cracking within early-age concrete due to thermal, drying and creep behavior", Cement Concrete Res., 32(7), 1053-1059. https://doi.org/10.1016/S0008-8846(02)00743-3
  34. Zou, X., Chao, A., Tian, Y., Wu, N., Zhang, H., Yu, T.Y. and Wang, X. (2012), "An experimental study on the concrete hydration process using Fabry-Perot fiber optic temperature sensors", Measurement, 45(5), 1077-1082. https://doi.org/10.1016/j.measurement.2012.01.034
  35. Zou, X., Chao, A., Wu, N., Tian, Y., Yu, T.Y. and Wang, X. (2012), "Miniature fiber optic temperature sensor for concrete structural health monitoring", Proceedings of the SPIE, 8345, 83454V.

피인용 문헌

  1. Influence of curing temperatures on the hydration of calcium aluminate cement/Portland cement/calcium sulfate blends vol.80, 2017, https://doi.org/10.1016/j.cemconcomp.2017.03.016
  2. Nondestructive corrosion detection using fiber optic photoacoustic ultrasound generator vol.62, 2015, https://doi.org/10.1016/j.measurement.2014.11.004
  3. Design calibration and characterization of a robust low-cost fiber-optic 2D deflection sensor vol.267, 2017, https://doi.org/10.1016/j.sna.2017.10.014
  4. Prediction model for the hydration properties of concrete vol.12, pp.4, 2013, https://doi.org/10.12989/cac.2013.12.4.377
  5. Strain monitoring of reinforced concrete with OTDR-based FBG interrogation technique vol.20, pp.3, 2013, https://doi.org/10.12989/sss.2017.20.3.343
  6. Surface Rust Detection Using Ultrasonic Waves in a Cylindrical Geometry by Finite Element Simulation vol.3, pp.3, 2013, https://doi.org/10.3390/infrastructures3030029
  7. A review on structural health monitoring of railroad track structures using fiber optic sensors vol.33, pp.p7, 2020, https://doi.org/10.1016/j.matpr.2020.06.217
  8. Adding Effects of CaF2 and TiO2 as Mineralizers on the Sintering Temperature and Hardening Properties of Calcium Sulfoaluminate Cement vol.19, pp.12, 2013, https://doi.org/10.3151/jact.19.1309
  9. An embeddable spherical smart aggregate for monitoring concrete hydration in very early age based on electromechanical impedance method vol.32, pp.5, 2013, https://doi.org/10.1177/1045389x20963175