참고문헌
- Bieniawski, Z. T. (1989). Engineering rock mass classifications, John Wiley & Sons, pp. 162-169.
- Bierbaumer, A. (1913). "Die dimensionnierung des tunnelmanerwerks." p. 101.
- Carranza-Torres, C. and Fairhurst, C. (2000). "Application of the convergence-confinement method of tunnel design to rock masses that satisfy the hoek-brown failure criterion." Tunnelling and Underground Space Technology, Vol. 15, No. 2, pp. 187-213. https://doi.org/10.1016/S0886-7798(00)00046-8
- Chun, B. S. and Shin, Y. W. (2000). "A case study on the design loads of tunnel concrete lining." Civil Expo, pp. 5-8 (in Korean).
- Chun, B. S. and Shin, Y. W. (2001). "A study on the design loads of natm tunnel concrete lining." J. of Korean Society for Rock Mechanics Tunnel & Underground, Vol. 11, No. 2, pp. 96-108 (in Korean).
- Grimstad, E. and Barton, N. (1993). "Updating the Q-system for NMT." Proc. int. symp. on sprayed concrete - modern use of wet mix sprayed concrete for underground support, Fagernes. Oslo, pp. 46-66.
- Huh, D. H., Chang, S. B. and Moon, H. K. (2008). "A study on the secondary tunnel lining design using a ground_lining interaction model." J. of The Korean Society for Geosystem Engineering, Vol. 45, No. 4, pp. 370-380 (in Korean).
- Kim, S. H., Kim K. L., Jeong, S. S., Choi, W. I., Lee, K. J. and Lee, S. W. (2012). "Estimation of the ground loads acting on concrete lining in NATM tunnel." Korean Society for Railway, pp. 415-420 (in Korean).
- Kim, S. H., Park, I. J., Moon, H. K. and Shin, Y. S. (2010). "A study on behavioral characteristics of concrete lining based on the equations of relaxed rock loads." J. of Korean Tunnelling and Underground Space Association, Vol. 12, No. 6, pp. 443-450 (in Korean).
- Moon, S. H., Shin, Y. W., Kim., S. H. and Yoo, H. K. (2012). "A sudy on load bearing capacity of composity member with steel rib and shotcrete in natm tunnel." J. of the Korean Society of Civil Engineers, Vol. 33, No. 5C, pp. 221-229 (in Korean).
- Park, J. J., Kim, Y. M., Hwang, T. J. and Jeong, S. S. (2011). "Numerical analysis of tunnel lining under lossening load." J. of The Korean Geotechnical Society, Vol. 27, No. 7, pp. 35-45 (in Korean).
- Rose, D. (1982). "Revising terzaghi's tunnel rock load coefficient." Proc. 23rd U.S Symposium on Rock Mechanics., AIME, New york, pp. 953-960.
- Ryu, D. H., Kim, S. C., Lee, C. J., Park, J. Y., Lim J. G. and Moon, J. W. (2012). "A study on the application based on the equations of loosening loads for the optimized design of concrete lining." Korean Society for Railway, pp. 7-18 (in Korean).
- Seo, S. H., Chang, S. B. and Lee, S. D. (2002). "An analysis model of the secondary tunnel lining considering ground-primary support-secondary lining interaction." J. of Korean Society for Rock Mech, Vol. 12, No 2, pp. 107-114 (in Korean).
- Unal, E. (1983). Design guideline and roof control standards for coal mine roofs, Ph.D. Thesis, The Pennsylvania State University, USA.
- Venkateswarlu, V. (1986). Geomechanics classification of coal measure rocks vis-a-vis roof supports, engineering rock mass classification, ed. Bieniawski, Z. T., John Wiley & Sons.
피인용 문헌
- Structural performance of final lining according to the rock load shape vol.20, pp.4, 2016, https://doi.org/10.1007/s12205-015-0308-1
- Evaluation of rock load based on critical shear strain concept on tunnels vol.15, pp.6, 2013, https://doi.org/10.9711/KTAJ.2013.15.6.637
- Technical Trend of Inverse Analysis to Identify the Strength Parametersof Rock Mass in Underground Excavation vol.54, pp.4, 2017, https://doi.org/10.12972/ksmer.2017.54.4.437