DOI QR코드

DOI QR Code

Seismic responses of composite bridge piers with CFT columns embedded inside

  • Qiu, Wenliang (School of civil engineering, Dalian University of Technology) ;
  • Jiang, Meng (School of hydraulic engineering, Dalian University of Technology) ;
  • Pan, Shengshan (School of civil engineering, Dalian University of Technology) ;
  • Zhang, Zhe (School of civil engineering, Dalian University of Technology)
  • Received : 2012.01.10
  • Accepted : 2013.07.19
  • Published : 2013.09.25

Abstract

Shear failure and core concrete crushing at plastic hinge region are the two main failure modes of bridge piers, which can make repair impossible and cause the collapse of bridge. To avoid the two types of failure of pier, a composite pier was proposed, which was formed by embedding high strength concrete filled steel tubular (CFT) column in reinforced concrete (RC) pier. Through cyclic loading tests, the seismic performances of the composite pier were studied. The experimental results show that the CFT column embedded in composite pier can increase the flexural strength, displacement ductility and energy dissipation capacity, and decrease the residual displacement after undergoing large deformation. The analytical analysis is performed to simulate the hysteretic behavior of the composite pier subjected to cyclic loading, and the numerical results agree well with the experimental results. Using the analytical model and time-history analysis method, seismic responses of a continuous girder bridge using composite piers is investigated, and the results show that the bridge using composite piers can resist much stronger earthquake than the bridge using RC piers.

Keywords

Acknowledgement

Supported by : National Natural Science Foundation of China

References

  1. Chang, G.A. and Mander, J.B. (1994), "Seismic energy based fatigue damage analysis of bridge columns", Technical Report NCEER-94-0006, University at Buffalo, State University of New York.
  2. Chen, W.F. and Duan, L. (1999), Bridge Engineering Handbook, CRC press LLC.
  3. Cusson, D. and Paultre, P. (1994), "High-strength concrete piers confined by rectangular ties", J. Struct. Eng., ASCE, 120(3), 783-804. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:3(783)
  4. Fahmy, M.F.M., Wu, Z.S. and Wu, G. (2009), "Seismic performance assessment of damage-controlled FRP-retrofitted RC bridge columns using residual deformations", J. Compos. Constr., 13(6), 498-513. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000046
  5. Fujino, Y., Hashimoto, S. and Abe, M. (2005), "Damage analysis of Hanshin expressway viaducts during 1995 Kobe Earthquake. I: residual inclination of reinforced concrete piers", J. Bridge Eng., 10(1), 45-53. https://doi.org/10.1061/(ASCE)1084-0702(2005)10:1(45)
  6. Hashimoto, S., Fujino, Y. and Abe, M. (2005), "Damage analysis of Hanshin expressway viaducts during 1995 Kobe Earthquake. II: damage mode of single reinforced concrete Piers", J. Bridge Eng., 10(1), 54-60. https://doi.org/10.1061/(ASCE)1084-0702(2005)10:1(54)
  7. Hsu, Y.T. and Fu, C.C. (2004), "Seismic effect on highway bridges in Chi Chi Earthquake", J. Perform. Constructed Facil., 18(1), 869-879.
  8. Legeron, F. and Paultre, P. (2000), "Behavior of high-strength concrete piers under cyclic flexure and constant axial load", ACI Struct. J., 97(4), 591-601.
  9. Mander, J., Priestley, M.N. and Park, R. (1983), "Seismic design of bridge piers", Rep. No. 84-02, University of Canterbury, Christchurch, New Zealand.
  10. Pandey, G.R. and Mutsuyoshi, H. (2005), "Seismic performance of reinforced concrete piers with bond-controlled reinforcements", ACI Struct. J., 102(2), 295-304.
  11. Paultre, P., Eid, R., Robles, H.I. and Bouaanani, N. (2009), "Seismic performance of circular high-strength concrete piers", ACI Struct. J., 106(4), 395-404.
  12. Paultre, P., Legeron, F. and Mongeau, D. (2001), "Influence of concrete strength and yield strength of ties on the behavior of high-strength concrete piers", ACI Struct. J., 98(4), 490-501.
  13. Roeder, C.W. and Lehman, D.E. (2009), "Research on rapidly constructed CFT bridge piers suitable for seismic design", Lifeline Earthquake Engineering in a Multihazard Environment ASCE (TCLEE 2009), 24-34.
  14. Sakino, K., Ninakawa, T., Nakahara, H. and Morino, S. (1998), "Experimental studies and design recommendations on concrete filled steel tubular columns-U.S.-Japan Cooperative Earthquake Research Program", Structural Engineers World Congress, N.K. Srivastava, July.
  15. Sun, Z.G., Si, B.J., Wang, D.S., Guo, X. and Yu, D.H. (2010), "Research on the seismic performance of high-strength concrete column with high-strength stirrups", Engineering Mechanics, 27(5), 128-136. (In Chinese)
  16. Taucer, F., Spacone, E. and Filippou, F. (1991), "A fiber beam-column element for seismic response analysis of reinforced concrete structures", UCB/EERC Technical Rep. No. 91/17, Earthquake Engineering Research Center, University of California, Berkeley, CA.
  17. Zahn, F.A., Park, R. and Priestley, M.J.N. (1990), "Flexural strength and ductility of circular hollow reinforced concrete piers without confinement on inside face", ACI Struct. J., 87(2), 156-166.
  18. Zhang, H., Liu, Z. and Li, H.Y. (2010), "Experimental study on seismic performance of concrete-filled steel bridge piers", J. Disaster Prevention Mitigation Eng., 30(4), 442-446. (In Chinese)

Cited by

  1. Finite element study the seismic behavior of connection to replace the continuity plates in (NFT/CFT) steel columns vol.21, pp.1, 2016, https://doi.org/10.12989/scs.2016.21.1.073
  2. Experimental study discussion of the seismic behavior on new types of internal/external stiffeners in rigid beam-to-CFST/HSS column connections vol.136, 2017, https://doi.org/10.1016/j.conbuildmat.2017.01.032
  3. Behaviour of steel tube reinforced-concrete short bridge columns under cyclic loading vol.70, pp.22, 2018, https://doi.org/10.1680/jmacr.17.00332
  4. Seismic behavior of steel tube reinforced concrete bridge columns vol.28, pp.1, 2013, https://doi.org/10.12989/scs.2018.28.1.063