Steel and Composite Structures

  • 제14권5호
  • /
  • Pages.493-509
  • /
  • 2013
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Ultimate behavior of composite beams with shallow I-sections

  • Gorkem, Selcuk Emre (Erciyes University, Biosystems Engineering Department) ;
  • Husem, Metin (Karadeniz Technical University, Civil Engineering Department)
  • 투고 : 2013.02.04
  • 심사 : 2013.05.20
  • 발행 : 2013.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

Bending behavior of reinforced concrete slabs encased over shallow I-sections at different levels of compression heads were investigated in present study. 1500 mm long I-sections were used to create composite slabs. Compression heads of monolithic experimental members were encased at different levels into the concrete slabs. Shear connections were welded over some of the I-sections. The testing was carried out in accordance with the principles of four-point loading. Results revealed decreasing load bearing and deflection capacities of composite beams with increasing encasement depths into concrete. Mechanical properties of concrete and reinforcing steel were also examined. Resultant stresses calculated for composite beams at failure were found to be less than the yield strength of steel beams. Test results were discussed with regard to shear and slip effect.

키워드

참고문헌

  1. Amadio, C. and Fragiacomo, M. (2002), "Effective width evaluation of steel-concrete composite beams", J. Construct. Steel Res., 58(3), 373-388. https://doi.org/10.1016/S0143-974X(01)00058-X
  2. Ansourian, P. (1981), "Experiments on composite beams", Proceeding of Institute of Civil Engineers - Part2, 71, 25-51.
  3. Arda, T.S. and Yardimci, N. (2000), Plastic design of composite member in steel structures, Birsen Publishing, Istanbul, Turkey.
  4. Byfield, M.P., Dhanalakshmi, M. and Goyder, H.G.D. (2004), "Modeling of undraped semi-continuous composite beams", J. Construct. Steel Res., 60(9), 1353-1367. https://doi.org/10.1016/j.jcsr.2003.12.004
  5. Cai, C.S., Nie, J. and Shi, X.M. (2007), "Interface slip effect on bonded plate repairs of concrete beams", Eng. Struct., 29(6), 1084-1095. https://doi.org/10.1016/j.engstruct.2006.07.017
  6. Chen, W.Q., Wu, Y.F. and Xu, R.Q. (2007), "State space formulation for composite beam-columns with partial interaction", Compos. Sci. Tech., 67(11-12), 2500-2512. https://doi.org/10.1016/j.compscitech.2006.12.013
  7. Chung, K.F. and Lawson, R.M. (2001), "Simplified design of composite beams with large web openings to Eurocode 4", J. Construct. Steel Res., 57(2), 135-163. https://doi.org/10.1016/S0143-974X(00)00011-0
  8. Dall'Asta, A. (2001), "Composite beams with weak shear connection", Int. J. Solid. Struct., 38(32-33), 5605-5624. https://doi.org/10.1016/S0020-7683(00)00369-3
  9. Davies, C. (1975), Steel-Concrete Composite Beams for Buildings, John Wiley & Sons.
  10. Fabbrocino, G., Manfredi, G. and Cosenza, E. (2000), "Analysis of continuous composite beams including partial interaction and bond", J. Struct. Eng. ASCE, 126(12), 1288-1294. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:11(1288)
  11. Fabbrocino, G., Manfredi, G. and Cosenza, E. (2001), "Ductility of composite beams under negative bending: An equivalence index for reinforcing steel classification", J. Construct. Steel Res., 57(2), 185-202. https://doi.org/10.1016/S0143-974X(00)00008-0
  12. Fabbrocino, G., Manfredi, G. and Cosenza, E. (2002), "Modelling of continuous steel-concrete composite beams: Computational aspects", Comp. Struct., 80(27-30), 2241-2251. https://doi.org/10.1016/S0045-7949(02)00257-2
  13. Fahmy, E.H. (1996), "Analysis of composite beams with rectangular web openings", J. Construct. Steel Res., 37(1), 47-62. https://doi.org/10.1016/0143-974X(95)00022-N
  14. Galambos, T.V. (2000), "Recent research and design developments in steel and composite steel-concrete structures in USA", J. Construct. Steel Res., 55(1-3), 289-303. https://doi.org/10.1016/S0143-974X(99)00090-5
  15. Gattesco, N. (1999), "Analytical modeling of nonlinear behavior of composite beams with deformable connection", J. Construct. Steel Res., 52(2), 195-218. https://doi.org/10.1016/S0143-974X(99)00026-7
  16. Hamada, S. and Longworth, L. (1976), "Ultimate strength of continuous composite beams", J. Struct. Div., 102(7), 1463-1478.
  17. Heins, C.P. and Fan, H.M. (1976), "Effective composite beam width at ultimate load", J. Struct. Div., 102(11), 2163-2179.
  18. Johansen, R.P. (1970), "Research on steel-concrete composite beams", J. Struct. Div. ASCE, 96 (3), 445-459.
  19. Johansen, R.P. and Willmington, R.T. (1972), "Vertical shear in continuous composite beams", Proceeding of Institute of Civil Engineers, 189-206.
  20. Knowles, P.R. (1973), Composite Steel and Concrete Construction, John Wiley & Sons.
  21. Lee, J. and Kim, S.E. (2010), "Flexural-torsional buckling of thin walled I-section composites", Comput. Struct., 79(10), 987-995.
  22. Liang, Q.Q., Uy, B., Bradford, M.A. and Ronagh, H.R. (2004), "Ultimate shear strength of continuous composite beams in combined bending and shear", J. Construct. Steel Res., 60 (8), 1109-1128. https://doi.org/10.1016/j.jcsr.2003.12.001
  23. Maleki, S. and Mahoutian, M. (2009), "Experimental and analytical study on channel shear connectors in fiber-reinforced concrete", J. Construct. Steel Res., 65(8-9), 1787-1793. https://doi.org/10.1016/j.jcsr.2009.04.008
  24. Mergulhao, A.J.R., Freitas, A.M.S. and Machado, R.M. (1998), "Composite steel beams strength evaluation constituted of steel profiles filled with reinforced concrete", J. Construct. Steel Res., 46(1-3), 223-224. https://doi.org/10.1016/S0143-974X(98)00097-2
  25. Nakamura, S.I. and Narita, N. (2003), "Bending and shear strengths of partially encased composite I girders", J. Construct. Steel Res., 59(12), 1435-1453. https://doi.org/10.1016/S0143-974X(03)00104-4
  26. Nie, J.G. and Cai, C.S. (2003), "Steel-concrete composite beams considering shear slip effects", J. Struct. Eng. ASCE, 129(4), 495-506. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:4(495)
  27. Ranzi, G., Gara, F. and Ansourian, P. (2006), "General method of analysis for composite beams with longitudinal and transverse partial interaction", Comput. Struct., 84(31-32), 2373-2384. https://doi.org/10.1016/j.compstruc.2006.07.002
  28. Ranzi, G. and Zona, A. (2007), "A steel-concrete composite beam model with partial interaction including the shear deformability of the steel component", Eng. Struct., 29(11), 3026-3041. https://doi.org/10.1016/j.engstruct.2007.02.007
  29. Salmon, C.G. and Johnson, J.E. (1971), Steel Structures Design and Behavior, Intext Educational Publishers.
  30. Shanmugam, N.E., Ng, Y.H. and Liew, J.Y.R. (2002), "Behaviour of composite haunched beams connection", Eng. Struct., 24(11), 1451-1463. https://doi.org/10.1016/S0141-0296(02)00093-7
  31. Shariati, M., Sulong, N.H.R., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2012), "Behaviour of C shaped angle shear connectors under monotonic and fully reversed cycled loading: An experimental study", Mater. Design, 41, 67-73. https://doi.org/10.1016/j.matdes.2012.04.039
  32. Thevendran, V., Shanmugam, N.E., Chen, S. and Liew, J.Y.R. (2000), "Experimental study on steel-concrete composite beams curved in plan", Eng. Struct., 22(8), 877-889. https://doi.org/10.1016/S0141-0296(99)00046-2
  33. TS 3526 (1985), Water Absorption and Unit Weight of Concrete Aggregates, Institute of Turkish Standards, Ankara, Turkey.
  34. TS 500 (2000), Requirements for Design and Construction of Reinforced Concrete Structures, Institute of Turkish Standards, Ankara, Turkey.
  35. TS 706 (1985), Standard of Gradation Sieves, Institute of Turkish Standards, Ankara, Turkey.
  36. TS 802 (1985), Concrete Mixture Calculations, Institute of Turkish Standards, Ankara, Turkey.
  37. Viest, I.M., Fountain, R.S. and Singleton, R.C. (1958), Composite construction in steel and concrete for bridges and buildings, McGraw-Hill Book Company, New York, NY, USA.
  38. Xue, D., Liu, Y., Yu, Z. and He, J. (2012), "Static behavior of multi-stud shear connectors for steel-concrete composite bridge", J. Construct. Steel Res., 74, 1-7. https://doi.org/10.1016/j.jcsr.2011.09.017

피인용 문헌

  1. Flexural stiffness of steel-concrete composite beam under positive moment vol.20, pp.6, 2016, https://doi.org/10.12989/scs.2016.20.6.1369
  2. Modeling and simulation of partially delaminated composite beams vol.18, pp.5, 2015, https://doi.org/10.12989/scs.2015.18.5.1119
  3. Structural performance of composite double beam system vol.19, pp.2, 2016, https://doi.org/10.1177/1369433215624599
  4. Mechanical behavior of steel-concrete composite decks with perfobond shear connectors vol.17, pp.3, 2014, https://doi.org/10.12989/scs.2014.17.3.339
  5. Study on flexural capacity of simply supported steel-concrete composite beam vol.21, pp.4, 2016, https://doi.org/10.12989/scs.2016.21.4.829