DOI QR코드

DOI QR Code

Non-linear analyses model for composite box-girders with corrugated steel webs under torsion

  • Ko, Hee-Jung (School of Civil, Environmental & Architectural Engineering, Korea University) ;
  • Moon, Jiho (School of Civil, Environmental & Architectural Engineering, Korea University) ;
  • Shin, Yong-Woo (Civil Engineering Team, Daewoo E&C) ;
  • Lee, Hak-Eun (School of Civil, Environmental & Architectural Engineering, Korea University)
  • 투고 : 2012.03.23
  • 심사 : 2013.03.28
  • 발행 : 2013.05.25

초록

A composite box-girder with corrugated steel webs has been used in civil engineering practice as an alternative to the conventional pre-stressed concrete box-girder because of several advantages, such as high shear resistance without vertical stiffeners and an increase in the efficiency of pre-stressing due to the accordion effect. Many studies have been conducted on the shear buckling and flexural behavior of the composite box-girder with corrugated steel webs. However, the torsional behavior is not fully understood yet, and it needed to be investigated. Prior study of the torsion of the composite box-girder with corrugated steel webs has been developed by assuming that the concrete section is cracked prior to loading and doesn't have tensile resistance. This results in poor estimation of pre-cracking behaviors, such as initial stiffness. To overcome this disadvantage of the previous analytical model, an improved analytical model for torsion of the composite box-girder with corrugated steel webs was developed considering the concrete tension behavior in this study. Based on the proposed analytical model, a non-linear torsional analysis program for torsion of the composite box-girder with corrugated steel webs was developed and successfully verified by comparing with the results of the test. The proposed analytical model shows that the concrete tension behavior has significant effect on the initial torsional stiffness and cracking torsional moment. Finally, a simplified torsional moment-twist angle relationship of the composite box-girder with corrugated steel webs was proposed based on the proposed analytical model.

키워드

참고문헌

  1. ABAQUS (2010), Abaqus Analysis User's Manual version 6.10., Dassault Systemes Simulia Corp.
  2. Abbas, H.H., Sause, R. and Driver R.G. (2007), "Analysis of flange transverse bending of corrugated web I-girders under in-plane loads", ASCE J. Struct. Eng., 133(3), 347-355 https://doi.org/10.1061/(ASCE)0733-9445(2007)133:3(347)
  3. ACI (2008), Building Code Requirements for Structural Concrete and Commentary, ACI 318M-08 American Concrete Institute, Detroit, MI.
  4. Belarbi, A. and Hsu, T.T.C. (1995), "Constitutive laws of softened concrete in biaxial tension-compression", ACI Struct. J., 92(5), 562-573.
  5. CEN (2004), Eurocode 2: Design of Concrete Structures: Part 1-1: General Rules and Rules for Buildings, Brussels.
  6. Chalioris, C.E. (2006), "Experimental study of the torsion of reinforced concrete members", Struct. Eng. Mech., 23(6), 713-737. https://doi.org/10.12989/sem.2006.23.6.713
  7. Collins, M.P. and Mitchell, D. (1991), Prestressed concrete structures, Prentice-Hall, Englewood Cliffs, NJ.
  8. Driver, R.G., Abbas, H.H. and Sause, R. (2006), "Shear behavior of corrugated web bridge girder", ASCE J. Struct. Eng., 132(2), 195-203. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:2(195)
  9. Elgaaly, M., Seshadri, A. and Hamilton, R.W. (1997), "Bending strength of steel beams with corrugated webs", ASCE J. Struct. Eng., 123(6), 772-782. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:6(772)
  10. Hamilton, R.W. (1993), "Behavior of welled girder with corrugated webs", Ph.D. Dissertation, University of Maine, Maine, Canada
  11. Hsu, T.T.C. (1984), Torsion of Reinforced Concrete, Van Nostrand Reinhold Company, New York, NY.
  12. Hsu, T.T.C. (1988), "Softened truss model theory for shear and torsion", ACI Struct. J., 85(6), 624-635.
  13. Karayannis, C.G. (2000), "Smeared crack analysis for plain concrete in torsion", ASCE J. Struct. Eng., 126(6), 638-645. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:6(638)
  14. Karayannis, C.G. and Chalioris, C.E. (2000a). "Experimental validation of smeared analysis for plain concrete in torsion", ASCE J. Struct. Eng., 126(6), 646-653. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:6(646)
  15. Karayannis, C.G. and Chalioris, C.E. (2000b). "Strength of prestressed concrete beams in torsion", Struct. Eng. & Mech., 10(2), 165-180. https://doi.org/10.12989/sem.2000.10.2.165
  16. Machimdamrong, C., Watanabe, E. and Utsunomiya, T. (2004), "Analysis of corrugated steel web girders by an efficient beam bending theory", JSCE Struct. Eng. Earthq. Eng., 21(2), 131-142. https://doi.org/10.2208/jsceseee.21.131s
  17. Mo, Y.L., Jeng, C.H. and Chang, Y.S. (2000), "Torsional behavior of prestressed concrete box-girder bridges with corrugated steel webs", ACI Struct. J., 97(6), 849-859.
  18. Mo, Y.L. and Fan, Y.L. (2006), "Torsional design of hybrid concrete box girders", ASCE J. Bridge Eng., 11(3), 329-339. https://doi.org/10.1061/(ASCE)1084-0702(2006)11:3(329)
  19. Moon, J., Yi, J., Choi, B.H. and Lee, H.E. (2009), "Lateral-torsional buckling of I-girder with corrugated webs under uniform bending", Thin-Walled Struct., 47, 21-30.
  20. Moon, J., Yi, J., Choi, B.H. and Lee, H.E. (2009), "Shear strength and design of trapezoidally corrugated steel webs", J. Constr. Steel Res., 65, 1198-1205. https://doi.org/10.1016/j.jcsr.2008.07.018
  21. Samanta, A. and Mukhopadhyay, M. (1999), "Finite element static and dynamic analyses of folded plates", Eng. Struct., 21(3), 227-287
  22. Shima, H. and Watanabe, S. (2009), "Formulation for load-slip relationships of headed stud connector", Proceedings of '2009 fib Symposium, London, June.
  23. Yi, J., Gil, H., Youm, K. and Lee, H.E. (2008), "Interactive shear buckling of trapezoidally corrugated webs", Eng. Struct., 30, 1659-1666. https://doi.org/10.1016/j.engstruct.2007.11.009

피인용 문헌

  1. Analysis of corrugated steel web beam bridges using spatial grid modelling vol.18, pp.4, 2015, https://doi.org/10.12989/scs.2015.18.4.853
  2. Natural frequency of a composite girder with corrugated steel web vol.18, pp.1, 2015, https://doi.org/10.12989/scs.2015.18.1.255
  3. Prestressed concrete bridges with corrugated steel webs: Nonlinear analysis and experimental investigation vol.21, pp.5, 2016, https://doi.org/10.12989/scs.2016.21.5.1045
  4. Optimum design of multi-span composite box girder bridges using Cuckoo Search algorithm vol.17, pp.5, 2014, https://doi.org/10.12989/scs.2014.17.5.705
  5. A softened membrane model for prestressed concrete composite box girders with corrugated steel webs under pure torsion pp.2048-4011, 2018, https://doi.org/10.1177/1369433218788597
  6. Space grid analysis method in modelling shear lag of cable-stayed bridge with corrugated steel webs vol.24, pp.5, 2013, https://doi.org/10.12989/scs.2017.24.5.549
  7. Behavior of single-box multi-cell box-girders with corrugated steel webs under pure torsion. Part II: Theoretical model and analysis vol.129, pp.None, 2013, https://doi.org/10.1016/j.tws.2017.12.023
  8. A softened membrane model for composite box-girders with corrugated steel webs under pure torsion vol.173, pp.None, 2013, https://doi.org/10.1016/j.engstruct.2018.07.021
  9. Comparative Study on Dynamic Response of Deck Pavement of Two Kinds of Box Girder Bridges under Moving Loads vol.2019, pp.None, 2013, https://doi.org/10.1155/2019/6052745
  10. Reinforcement design of the top and bottom slabs of composite box girder with corrugated steel webs vol.33, pp.4, 2013, https://doi.org/10.12989/scs.2019.33.4.537
  11. Modified rotating-angle softened truss model for composite box-girder with corrugated steel webs under pure torsion vol.23, pp.9, 2013, https://doi.org/10.1177/1369433219898063
  12. Behavior of Cantilever Composite Girder Bridges with CSWs under Eccentric Loading vol.25, pp.10, 2021, https://doi.org/10.1007/s12205-021-2328-3