DOI QR코드

DOI QR Code

A Study on the Design of High-speed Parallel Robot

고속 병렬 로봇의 설계에 관한 연구

  • Received : 2013.02.06
  • Accepted : 2013.09.16
  • Published : 2013.10.01

Abstract

These days, the interest of high speed robotic system is increasing because it is very important to get the cost-competitiveness. The parallel kinematic mechanism is more useful than the serial kinematic mechanism. For the reason, the researches on the parallel robot system as a high speed robotic one are have been done by many researchers. In this paper, the research on the design and analysis of the high speed parallel robot has been done by the authors. First, Basic robot structure is designed and modal analysis is studied to get the basic characteristics of the vibrational motion. Second, the harmonic analysis is studied to get the information of the natural frequency in some different designs of the outer-arm of the parallel robot. Finally, actual robot system is designed and implemented and it is confirmed that the analysis results coincide with the experimental results.

Keywords

References

  1. Pierrot, F., Nabat, V., Company, O., Krut, S., and Poignet, P., "Optimal Design of a 4-DOF Parallel Manipulator: From Academia to Industry," IEEE Transactions on Robotics, Vol. 25, No. 2, 2009.
  2. From, P. J. and Gravdahl, J. T., "Fault Tolerance of Parallel Manipulators with Passive Joints," 7th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes, pp. 1240-1245, 2009.
  3. Bongsoo Kang and James K. Mills Department of Mechanical Engineering, "Study on Piezoelectric Actuators in Vibration Control of a Planar Parallel Manipulator," Proc. of the 2003 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Vol. 2, pp. 1268-1272, 2003.
  4. Li, Y. and Bone, G. M., "Are Parallel Manipulators More Energy Efficient?" Proc, of 2001 IEEE International Symposium on Computational Intelligence in Robotics and Automation, pp. 41-46, 2001.
  5. Ryu, S. J., "Joint Torque Distribution of Redundantly Actuated Parallel Mechanism," Ph.D. Thesis, School of Mechanical and Aerospace Engineering, Seoul National Univ., 2001.
  6. Cha, Y., "Development Status of a Parallel Mechanism," ICROS, Vol. 15, No. 1, pp. 22-28, 2009.
  7. ANSYS Inc, "Element Reference Manual," Vol. II, 2003.
  8. Luecke, G. R. and Gardner, J. F., "Experimental Results for Force Distribution in Cooperating Manipulator Systems Using Local Joint Control," The International Journal of Robotics Research, Vol. 13, No. 6, pp. 471-480, 1990.
  9. Jeong, J. I., Kang, D., Cho, Y. M., and Kim, J. W., "Kinematic Calibration for Redundantly Actuated Parallel Mechanisms," ASME Journal of Mechanical design, Vol. 126, No. 2, pp. 307-318, 2004. https://doi.org/10.1115/1.1667902