Journal of Korean Society of Industrial and Systems Engineering (산업경영시스템학회지)

Society of Korea Industrial and System Engineering (한국산업경영시스템학회)
권호 표지
DOI QR코드

DOI QR Code

Reliability Process Development of Near-infrared Solid Microscope for Ophthalmic Surgery

안과수술용 근적외선 입체현미경의 신뢰도 확보를 위한 프로세스 정립

  • Kim, Min-Ho (Graduate School of Consulting, Kumoh National Institute of Technology) ;
  • Lee, Jonghwan (Graduate School of Consulting, Kumoh National Institute of Technology) ;
  • Wie, Doyeong (Graduate School of Consulting, Kumoh National Institute of Technology) ;
  • Cho, Joonggil (Graduate School of Consulting, Kumoh National Institute of Technology) ;
  • Kang, Kyungsu (Department of Complementary and Alternative Medicine, Kwangju Women's University)
  • 김민호 (금오공과대학교 컨설팅대학원) ;
  • 이종환 (금오공과대학교 산업공학부) ;
  • 위도영 (금오공과대학교 산업공학부) ;
  • 조중길 (금오공과대학교 산업공학부) ;
  • 강경수 (광주여자대학교 대체의학과)
  • Received : 2013.06.12
  • Accepted : 2013.06.18
  • Published : 2013.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

When developing a product, ensuring the quality and reliability is essential. Reliability process is always underestimated compared to its importance, especially in the field of domestic medical devices. In this paper, reliability process developed for near-infrared solid microscope, based on a variety of existing practices and other product process. The following findings were obtained as research progressed. First, learning about the medical equipment needed to assure the quality and reliability standards. Second, reliability process established to design a product in the field of medical devices.

Keywords

References

  1. Bae, B.-Y., Lee, J.-W., and Byun, Y.-H., Reliability Design using FMEA for Pressure Control Regulator of aircraft Fuel System. Journal of The Korean Society for Aviation and Aeronautics, 2009, Vol. 17, No. 1, p 24-28.
  2. Jung, W., Application of Reliability Technology in Products Design and Development. Society of Korea Industrial and Systems Engineering, 2005, p 267-271.
  3. Kim, J.-G., Issues of Reliability Test of Embedded Systems for Medical Devices. Journal of the Korean Institute of Electronics Engineers, 2012, Vol. 39, No. 1, p36-41.
  4. Kim, J.-H., Bae, B.-Y., Lee, J.-W., Byun, Y.-H., and Kim, K.-M., Design for Reliability of Air-Launching Rocket, Mirinae II Using FMEA. Journal of The Korean Society for Aeronautical and Space Sciences, 2008, Vol. 36, No. 12, p 1193-1200. https://doi.org/10.5139/JKSAS.2008.36.12.1193
  5. Kim, J.-S., Critical Success Design for Quality Function Deploymen. CHUNG-JU National University, 2000.
  6. Kim, J.-Y., Jung, H.-W., and Kim, G.-J., QFD Application to Select CMM Level 2 Metrics. Korean Operations Research and Management Science Society, 1997, No. 2, p 45-48.
  7. Lee, J.-H., Joh, M.-O., and Seo, Y.-K., Development of Work Breakdown Structure for 3-Staged Launch Vehicle. Aerospace Engineering and Technology, 2005, Vol. 4, No. 1, p 122-128.
  8. Park, B.-H., Go, B.-G., Kim, S.-J., Kim, J.-W., Jang, J.-S., Kim, G.-S., and Lee, H.-Y., Development of Reliability Evaluation Process for New Product Development of Ultra-Small CMOS RF Voltage Controlled Oscillator IC. The Korean Institute of Industrial Engineers, 2005, Vol. 2005, No. 5, p 893-900.
  9. Yun, W.-Y., A Case Study for a Process of Design for Reliability. The Korean Institute of Industrial Engineers, 2004, Vol. 2004, No. 11, p 309-316.