과제정보
연구 과제 주관 기관 : 재료연구소
참고문헌
- C. Maidorn, D. Blind, 1985, Solidification and Segregation in Heavy Forging Ingots, Nucl. Eng. Des., Vol. 84, No. 2, pp. 285-296. https://doi.org/10.1016/0029-5493(85)90199-2
- Y. D. Kim, J. R. Cho, W. B. Bae, 2010, Development of Forging Process Design to Close Internal Void, J. Mater. Process. Technol., Vol. 210, No. 3, pp. 415-422. https://doi.org/10.1016/j.jmatprotec.2009.09.022
- Steve P. Dudra, Y. T. Im, 1990, Analysis of Void Closure in Open-die Forging, Int. J. Mach. Tools Manuf., Vol. 30, No. 1, pp. 65-75. https://doi.org/10.1016/0890-6955(90)90042-H
- Y. S. Lee, S. U. Lee, C. J. Van Tyne, B. D. Joo, Y. H. Moon, 2011, Internal Void Closure during the Forging of Large Cast Ingot using a Simulation Approach, J. Mater. Process. Technol., Vol. 211, No. 6, pp. 1136-1145. https://doi.org/10.1016/j.jmatprotec.2011.01.017
- C. Y. Park, D. Y. Yang, 1996, A Study of Void Crushing in Large Forgings I: Bonding Mechanism and Estimation Model for Bonding Efficiency, J. Mater. Process. Technol., Vol. 57, No. 1-2, pp. 129-140. https://doi.org/10.1016/0924-0136(95)02055-1
- E. J. Kwak, G. P. Kang, K. Lee, 2012, A Study of Multiple Scale FEM Modeling for Prediction of Inner Void Closing Behavior in Open Die Forging Process, Trans. Mater. Process., Vol. 21, No. 5, pp. 319-323. https://doi.org/10.5228/KSTP.2012.21.5.319
- I. J. Choi, H. J. Choi, D. J. Yoon, G. A. Lee, S. J. Lim, 2011, Evaluation methods for Void Closing Behavior in Large Ingot, Trans. Mater. Process., Vol. 20, No. 5, pp. 339-343. https://doi.org/10.5228/KSTP.2011.20.5.339
- I. J. Choi, H. J. Choi, D. W. Kim, S. Choi, S. J. Lim, 2010, Void Closing Conditions of Large Ingot by Path Schedules, Trans. Mater. Process., Vol. 19, No. 8, pp. 480-485. https://doi.org/10.5228/KSTP.2010.19.8.480
- M. C. Song, I. K. Kwon, Y. G. Park, 2007, A Study on the Parameters Determining the Void Crushing Ratio in the Cogging Process of Large Forged Products, Trans. Mater. Process., Vol. 16, No. 7, pp. 502-508. https://doi.org/10.5228/KSPP.2007.16.7.502
- S. H. Kang, S. W. Kim, Y. S. Lee, 2010, Application of Modified Hydrostatic Stress Model to Internal Void Crushing in Forging of Large-scale Ingot, Steel Res. Int., Vol. 81, pp. 314-317.
피인용 문헌
- Forging of 1.9wt%C Ultrahigh Carbon Workroll : Part II - Void Closure and Diffusion Bonding vol.22, pp.8, 2013, https://doi.org/10.5228/KSTP.2013.22.8.463