과제정보
연구 과제 주관 기관 : 한국연구재단
참고문헌
- H. C. Kuo, L. J. Wu, 2002, Automation of Heat Bending in Shipbuilding, Comput. Ind., Vol. 48, No. 2, pp. 127-142. https://doi.org/10.1016/S0166-3615(02)00013-1
- D. E. Ko, C. D. Jang, S. I. Seo, H. W. Lee, 1999, Realtime Simulation of Deformation due to Line Heating for Automatic Hull Forming System, J. Soc. Naval Architects. Kor., Vol. 36, No. 4, pp. 116-127.
- M. Z. Li, Y. H. Liu, S. Z. Su, G. Q. Li, 1999, Multipoint Forming: a Flexible Manufacturing Method for a 3-D Surface Sheet, J. Mater. Process. Technol., Vol. 87, No. 1-3, pp. 277-280. https://doi.org/10.1016/S0924-0136(98)00364-1
- M. Z. Li, Z. Y. Cai, Z. Sui, Q. G. Yan, 2002, Multipoint Forming Technology for Sheet Metal, J. Mater. Process. Technol., Vol. 129, No. 1-3, pp. 333-338. https://doi.org/10.1016/S0924-0136(02)00685-4
- D. S. Shim, D. Y. Yang, K. H. Kim, M. S. Han, S. W. Chung, 2009, Numerical and Experimental Investigation into Cold Incremental Rolling of Doubly Curved Plates for Process Design of a New LARS(line array roll set) Rolling Process, CIRP Annals-Manuf. Technol., Vol. 58, No. 1, pp. 239- 242. https://doi.org/10.1016/j.cirp.2009.03.112
- S.C. Heo, Y. H. Seo, T. W. Ku, J. Kim, B. S. Kang, 2009, Study on Application of Flexible Die to Sheet Metal Forming Process, Trans. Mater. Process., Vol. 18, No. 7, pp. 556-564. https://doi.org/10.5228/KSPP.2009.18.7.556
- S. C. Heo, Y. H. Seo, B. S. Kang, J. Kim, 2012, Numerical and Experimental Study for Improvement of Formability in Flexible Forming Process, Trans. Mater. Process., Vol. 21, No. 7, pp. 433-440. https://doi.org/10.5228/KSTP.2012.21.7.432
- Y. H. Seo, B. S. Kang, J. Kim, 2012, Compensation for Elastic Recovery in a Flexible Forming Process Using Predictive Models for Shape Error, Trans. Mater. Process., Vol. 21, No. 8, pp. 479-484. https://doi.org/10.5228/KSTP.2012.21.8.479
- S. C. Heo, T. W. Ku, W. J. Song, J. Kim, B. S. Kang, 2010, Study on Flexible Forming Process Involving the Use of Sectional Flexible Die for Sheet Material, Trans. Kor. Soc. Mech. Eng., A, Vol. 34, No. 3, pp. 299-305. https://doi.org/10.3795/KSME-A.2010.34.3.299
- S. C. Heo, Y. H. Seo, J. W. Park, T. W. Ku, J. Kim, B. S. Kang, 2010, Application of Flexible Forming Process to Hull Structure Forming, J. Mech. Sci. Technol., Vol. 24, No. 1, pp. 137-140. https://doi.org/10.1007/s12206-009-1119-4
피인용 문헌
- Effect of Shape Design Variables on Flexibly-Reconfigurable Roll Forming of Multi-curved Sheet Metal vol.23, pp.2, 2014, https://doi.org/10.5228/KSTP.2014.23.2.103
- Development of a Flexibly-reconfigurable Roll Forming Apparatus for Curved Surface Forming vol.25, pp.3, 2016, https://doi.org/10.5228/KSTP.2016.25.3.161
- Evaluation of Formability Dependent on Reconfigurable Roller Types for 3D Curved Sheet Forming vol.25, pp.1, 2016, https://doi.org/10.5228/KSTP.25.1.12