참고문헌
- K. S. Krane, "Introductory Nuclear Physics", John Wiley & Son, 1988 pp. 529-530
- M. Shim, H. Chung, H. Yoshida, H. Jin, J. Lee, K. Song, M. Chang, H. Kang, S. Yun, and S. Cho, "Hydriding/dehydriding Characteristics on Fast Heat Transfer Response ZrCo Bed for ITER", Fusion Engineering and Design, Vol. 84, 2009, p. 1763 https://doi.org/10.1016/j.fusengdes.2008.11.006
- H. Petersen, "The Properties of Helium : Density, Specific Heats, Viscosity, and Thermal Conductivity at from 1 to 100 bar and from room temperature to about 1800K", Danish Atomic Energy Commission Research Establishment Riso Report, No. 224, 1970, pp. 1-45.
- F. Yang, X. Meng, J. Deng, Y. Wang, and Z. Zhang, "Identifying heat and mass transfer chara-cteristics of metal hydride reactor during adsorption-Parameter analysis and numerical study", International Journal of Hydrogen Energy, Vol. 33, 2008, pp. 1014-1022.
- H. Yoo, J. Ko, S. Yun, M. Chang, H. Kang, and W. Kim, "A numerical investigation of hydrogen desorption phenomena in ZrCo based hydrogen storage beds", International Journal of Hydrogen Energy, Vol. 38, 2013, pp. 6226-6233. https://doi.org/10.1016/j.ijhydene.2012.12.098
- T. Forde, E. Naess, and V.A. Yartys, "Modelling and Experimental results of heat transfer in a metal hydride store during hydrogen charge and discharge", International Journal of Hydrogen Energy, Vol. 34, 2009, pp. 5121-5130. https://doi.org/10.1016/j.ijhydene.2009.03.019
- R. D. Penzhorn, M. Devillers, and M. Sirch, "Evaluation of ZrCo and other getters for tritium handling and storage", Journal of Nuclear Materials, Vol. 170, 1990, p. 217-231. https://doi.org/10.1016/0022-3115(90)90292-U
- M. Shim, H. Chung, H. Yoshida, K. Kim, S. Cho, E. Lee, and M. Chang, "Experimental Study on the Delivery Rate and Recovery Rate of ZrCo Hydride for ITER Application", Fusion Science and Technology, Vol. 54, 2008, p. 27. https://doi.org/10.13182/FST08-39
- R. D. Penzhorn and M. Sirch, "Hydrogen Sorption Rate by Intermetallic Compounds Suitable for Tritium Storage", Fusion Technology, Vol. 28, 1995, pp 1399-1403. https://doi.org/10.13182/FST95-A30607
- Y. A. Cengel. "Heat Transfer : A Practical Approach" 2nd Ed. John Wiley & Son Inc. 2007.
- Y. Wang, X. C. Adroher, J. Chen, X. G. Yang, and T. Miller, "Three- dimensional modeling of hydrogen sorption in metal hydride hydrogen storage beds", Journal of Power Sources, Vol. 194, 2009, pp. 997-1006. https://doi.org/10.1016/j.jpowsour.2009.06.060
- M. Shim, H. Chung, H. Yoshida, S. Cho, D. Kim, and M. Ahn, "Heat analysis on the initial reference design of ZrCo hydride beds for ITER", Fusion Engineering and Design, Vol. 83, 2008, pp. 1433-1437. https://doi.org/10.1016/j.fusengdes.2008.06.035
- H. Kang, S. Cho, S. Yun, M. Chang, H. Chung, and D. Koo. "Fabrication and test of thin double-layered annulus metal hydride bed.", Fusion Engineering and Design, Vol. 86, 2011, pp. 2196-2199. https://doi.org/10.1016/j.fusengdes.2010.11.024
- W. D. Callister and D. G. Rethwisch, "Material Science and Engineering - SI version" 8th Ed. John Wiley and Son Inc. 2011.
- H. G. Kraus, "Experimental Measurement of Stationary SS 304, SS316L and 8630 GTA Weld Pool Surface Temperatures." Welding Research Supplement July. 1989. pp. 269s-279s.
- M. Devillers, M. Sirch, S. Bredendiek-Kamper, and R. D. Penzhorn, "Characterization of the ZrCo-Hydrogen System in View of Its Use for Tritium Storage." Chemistry of Materials, 1990. 2. pp. 255-262.
- M. Devillers, M. Sirch, and R. D. Penzhorn. "Solubility of hydrogen and deuterium in ZrCo." Journal of Nuclear Materials, 207, 1993, 53-61. https://doi.org/10.1016/0022-3115(93)90247-V
- D. Chung, J. Lee, D. Koo, H. Chung, K. Kim, H. Kang, M. Chang, P. Camp, K. Jung, S. Cho, S. Yun, C. Kim, H. Yoshida, S. Paek, and H. Leea Hydriding and dehydriding characteristics of small-scale DU and ZrCo beds, Fusion Eng. Des. (2013), http://dx.doi.org/10.1016/j.fusengdes.2013.04.004.
- H. Chung, D. Chung, D. Koo, J. Lee, M. Shim, S. Cho, K. Jung, S. Yun, "Storage and Delivery of Hydrogen Isotopes", Trans. of the Korean Hydrogen and New Energy Society, Vol. 22, No. 3, 2011, pp. 372-379.
- H. Chung, K. Kang, M. Chang, S. Cho, W. Kim, J. Nam, D. Kim, K. Song, S. Paek, D. Koo, D. Chung, J. Lee, C. Kim, K. Jung and S. Yun, "Safety Analysis of a Hydrogen Isotopes Process", Trans. of the Korean Society of Hydrogen Energy, Vol. 23, No. 3, 2012, pp. 219-226. https://doi.org/10.7316/KHNES.2012.23.3.219
- D. Koo, H. Chung, D. Chung, J. Lee, S. Yun, S. Cho and K. Jung, "Hydrogen Isotopes Accountancy and Storage Technology", Trans. of the Korean Society of Hydrogen Energy, Vol. 23, No. 1, 2012, pp. 49-55. https://doi.org/10.7316/khnes.2012.23.1.049
- S. Yun, M. Chang, H. Kang, C. Kim, S. Cho, K. Jung, H. Chung and K. Song, "Tritium Fuel Cycle Technology of ITER Project", Trans. of the Korean Society of Hydrogen Energy, Vol. 23, No. 1, 2012, pp. 56-64. https://doi.org/10.7316/khnes.2012.23.1.056
- J. Lee, J. Park, D. Koo, D. Chung, S. Yun, S. Paek, and H. Chung, "Rapid Cooling Performance Evaluation of a ZrCo bed for a Hydrogen Isotope Storage", Trans. of the Korean Society of Hydrogen Energy, Vol. 24, No. 2, 2013, pp. 128-135. https://doi.org/10.7316/KHNES.2013.24.2.128
피인용 문헌
- Characteristics of a Hydrogen Isotope Storage and Accountancy System vol.26, pp.6, 2015, https://doi.org/10.7316/KHNES.2015.26.6.541
- Dehydriding Performance in a Depleted Uranium Bed vol.27, pp.1, 2016, https://doi.org/10.7316/KHNES.2016.27.1.022