DOI QR코드

DOI QR Code

응축 및 증발 부하에 따른 냉동시스템 특성에 관한 연구

A Study on the Characteristics of Refrigerating System according to the Condensation and Evaporation Load

  • 최승일 (한국폴리텍V대학 산업설비자동화과) ;
  • 지명국 (영진단조(주) 기술개발부) ;
  • 이대철 (경상대학교 대학원 정밀기계공학과) ;
  • 정효민 (경상대학교 에너지기계공학과.해양산업연구소) ;
  • 정한식 (경상대학교 에너지기계공학과.해양산업연구소)
  • Choi, Seung-Il (Department of Automation of Industrial Installation, Korea Polytechnic V College) ;
  • Ji, Myoung-Kuk (Young Jin Forging Co., LTD.) ;
  • Lee, Dae-Chul (Graduate School of Precision Mechanical Engineering, Gyeongsang National University) ;
  • Jeong, Hyo-Min (Department of Energy and Mechanical Engineering, Gyeongsang National University.Institute of Marine Industry) ;
  • Chung, Han-Shik (Department of Energy and Mechanical Engineering, Gyeongsang National University.Institute of Marine Industry)
  • 투고 : 2013.03.18
  • 심사 : 2013.05.14
  • 발행 : 2013.06.30

초록

The refrigerating system are high efficiency and comfortable due to the automation of the system as well as enhance energy saving are contributing to driving system. Previous study the rotational frequency of the compressor was confined to the fixed condition have changed load of evaporator and condenser related about the refrigerator performance characteristic according to the evaporation load and condensation load change tries to be analyze through the experiment. The useful data for the economic driving of the freezing apparatus tries to be drawn. Consequently, it confirmed that refrigerant in the compressor overheated and as the evaporation load increased the specific volume was increased and the coolant circulation rate decreased. In confirmed that condensation load increased the compression ratio and discharge gas temperature increased. It reduced the low-temperature efficiency and condensation calorie and the quality factor was decreased.

키워드

참고문헌

  1. K. Higuchi, 1984, "Stability of Evaporator Thermostatic Expansion Valve Refrigeration Control Loop", Refrigeration, Vol. 59, No. 697, pp. 1-12.
  2. H. Yasuda, 1986, "Evaporator Superheat Control", Refrigeration, Vol. 61, No. 701, pp. 22-26.
  3. S. A. Tassou and H. O. Al-Nizari, 1993, "Investigation of the Effects of Thermostatic and Electronic Expansion Valves on the Steady-State and Transient Performance of Commercial Chillers", Rev. Int. Froid, Vol. 16, No. 1, pp. 49-55. https://doi.org/10.1016/0140-7007(93)90021-Y
  4. R. Hanzawa, 1986, "Application of Industrial Electronic Expansion Valve", Refrigeration, Vol. 61, No. 701, pp. 46-51.
  5. J. S. Kim, J. H. Kim, H. S. Yang and S. N. Choi, 1994, "Electronic expansion valve evaporator of refrigerant flow control using and also a study on the characteristics of overheating", Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 6, No. 4, pp. 380-387.
  6. W. W. Jang, 1995, "A study on the characteristics for automotive air conditioning system using HFC-134a based on expansion valve opening", MS thesis, Kyunghee University, Seoul, Korea.