DOI QR코드

DOI QR Code

마찰 드럼 상에서 집속체 표면 꼬임 특성

Characteristics of Surface Twists of Bundle on Friction Drum

  • 임정호 (경희대학교 대학원 섬유공학과) ;
  • 간바트 (경희대학교 대학원 기계공학과) ;
  • 허유 (경희대학교 공과대학 기계공학과)
  • Lim, Jung H. (Department of Textile Engineering, Graduate School, Kyunghee University) ;
  • Ganbat, T. (Department of Mechanical Engineering, Graduate School, Kyunghee University) ;
  • Huh, You (Department of Mechanical Engineering, College of Engineering, Kyunghee University)
  • 투고 : 2013.03.29
  • 심사 : 2013.06.01
  • 발행 : 2013.06.30

초록

This research determines the traits of bundle twists that appeared on the bundle surface, while the input fiber fleece is transformed to a bundle by using friction drums. A mathematical model is suggested to describe the twists generated in the friction area. Based on the bundle thickness dynamics, which is supposed to determine the geometrical array of the fibers joined layer by layer on the outer surface of an in-process bundle that rotates about the bundle axis, twists on the bundle surface are mathematically described, taking into account the bundle-drum slippage ratio, fiber fleece-feeding angle, and friction ratio. Twists are expressed in terms of the number of twists per length and the twist angle. Results show that the slippage ratio has a significant influence on the number of twists per length, but its influence on the twist angle is minimal. The fleece-feeding angle appears to be an important factor in deciding the twists. In addition, a critical fleece-feeding angle that corresponds to an angle that changes the twist direction could be determined. The friction ratio is positively related to the bundle twists, i.e., the twist number increases linearly with increasing friction ratio. However, the friction ratio is negatively related to the twist angle, i.e., at low friction ratios, the twist angle changed significantly, whereas a high friction ratio led to an almost constant twist angle.

키워드

참고문헌

  1. J. Luenenschloss and K. J. Brockmanns, "Cotton Processing by New Spinning Technologies, Possibilities and Limits", Int Text Bull, Yarn Formation (2), 1986, 32, 7-18.
  2. Y. Huh, Y. R. Kim, and W. Oxenham, "Analyzing Structural and Physical Properties of Ring, Rotor, and Friction Yarns", Text Res J, 2002, 72, 156-163. https://doi.org/10.1177/004051750207200212
  3. H. Fuchs, “Mechanical-Aerodynamic Friction Process”, Melliand Textilber, 1979, 60, 289-291.
  4. K. J. Brockmanns and J. Luenenschloss, "Friction Spinning Analysed", Int Text Bull, Yarn Forming, 1984, 30(3), 15-32.
  5. K. J. Brockmanns and T.-T. Phoa, "Theoretical and Practical Description of Fiber Moving and Twist Insertion during OE. Friction Spinning", Int Text Bull, Yarn Formation (1), 1987, 33, 55-67.
  6. J. Luenenschloss and K. J. Brockmanns, "Mechanics of OEFriction Spinning", Int Text Bull, Yarn Forming, 1985, 31(3), 29-59.
  7. E. Fehrer, “An Analysis of Friction Spinning”, Textil Praxis Int, 1986, 41(10), 1045-1047.
  8. P. R. Lord, C. W. Joo, and T. Ashizaki, “The Mechanics of Friction-spinning”, J Text Inst, 1987, 78, 234-254. https://doi.org/10.1080/00405008708658248
  9. P. R. Lord and J. P. Rust, “Twist Distribution in Open-end Friction-spun Yarn”, J Text Inst, 1990, 81, 211-213. https://doi.org/10.1080/00405009008658348
  10. F. Konda, M. Okamura, and A. A. Merati, “Effect of Suction Air Pressure in Friction Spinning on Yarn Properties”, Text Res J, 1996, 66, 446-452. https://doi.org/10.1177/004051759606600705
  11. A. A. Merati and M. Okamura, "Fiber Feeding onto the Yarn Tail in Friction Spinning, Part II: Convergent Fiber Transport Channel", Text Res J, 2000, 70, 974-980. https://doi.org/10.1177/004051750007001107
  12. R. Y. Zhu, G. A. V. Leaf, and W. Oxenham, “Fiber Behaviour in the Twisting Zone of a Friction-spinning Process”, J Text Inst, 1993, 84, 57-67. https://doi.org/10.1080/00405009308631247
  13. J. S. Kim, B. Lehmann, and Y. Huh, “Bundle Thickness Distribution on the Drum Surface in the Friction Spinning System”, Text Sci Eng, 2008, 45(3), 144-148.

피인용 문헌

  1. Characteristics of Twist Structure of a Bundle on Friction Drum vol.52, pp.2, 2015, https://doi.org/10.12772/TSE.2015.52.079
  2. Theoretical Analysis of the Twist Structure of Friction Yarns vol.53, pp.4, 2016, https://doi.org/10.12772/TSE.2016.53.221
  3. Theoretical Investigation of the Torque Twists Generated by Friction vol.51, pp.5, 2014, https://doi.org/10.12772/TSE.2014.51.235