The Transactions of The Korean Institute of Electrical Engineers (전기학회논문지)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지
DOI QR코드

DOI QR Code

Estimation of Spatial Variations in a Light Source by Optical Fiber Sensory System

광섬유를 이용한 광원 위치의 미세 변위 추정

  • Kim, Ji-Sun (Dept. of Biomedical Engineering, Konkuk University) ;
  • Jung, Gu-In (Dept. of Biomedical Engineering, Konkuk University) ;
  • Lee, Tae-Hee (Dept. of Biomedical Engineering, Konkuk University) ;
  • Choi, Ju-Hyeon (Dept. of Biomedical Engineering, Konkuk University) ;
  • Oh, Han-Byeol (Dept. of Biomedical Engineering, Konkuk University) ;
  • Kim, A-Hee (Dept. of Biomedical Engineering, Konkuk University) ;
  • Park, Hee-Jung (Dept. of Biomedical Engineering, Konkuk University) ;
  • Kim, Kyung-Seop (Dept. of Biomedical Engineering, Konkuk University) ;
  • Jun, Jae-Hoon (Dept. of Biomedical Engineering, Konkuk University)
  • Received : 2013.06.19
  • Accepted : 2013.08.21
  • Published : 2013.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study is to find the new method for estiming the spatial variations in a light source with utilizing the optical fiber sensory system. With this aim, firstly the asymmetry in the beam profile of a light source is evaluated by using the tipped optical fiber with 0, 10, 20, 30, 40, 45-degree angle. Secondly the variation of position in a light source is estimated by adjusting the relative position between the light source unit (XYZ stage, LED, Optical fiber) and the receiver unit (Photodiode, XYZ stage). Our experimental results show that the spatial variation of a light source can be resolved in terms of the variations in beam profile with varying the tip angle of an optical fiber and adjusting the relative distance between the light source unit and the receiver.

Keywords

References

  1. Steven Behnke, Michael Schreiber, "Digital Position Control for Analog Servos," IEEE-RAS International Conference on Humanoid Robots, pp.56-61, 2006.
  2. Won S. Kim, Frank Tendick, "A Comparison of Position and Rate Control for Telemanipulations with Consideration of ManIpulator System Dynamics," IEEE Journal of robotics and Automation, vol.3, issue5, pp.426-436, 1987. https://doi.org/10.1109/JRA.1987.1087117
  3. S. F. Tsodikov, V. I. Rakhovskii, "Magnetostriction Power Actuators for Superprecision Positioning," Measurement Techniques, vol.40, pp.56-62 1997.
  4. P. Weiss, "Broadband Fiber‐Optic Interferometer as Ultrasonic Transducer Suitable for Coating Adhesion Measurements," Review of Scientific Instruments, vol.66, issue8 , pp.4114-4123, 1995. https://doi.org/10.1063/1.1145357
  5. Hiroshi Kawano, Hideyuki Ando, "Study of a Recessless Screw and a Piezo Electric Screwdriver," international Conference on Intellige nt Robots and Systems, vol.1, pp.903-907, 2004.
  6. S.-H. Lee, J.-K. Kang, "Position Control of a Precise 6-D.O.F Stage with Magnetic Levitation," The Korean Society of Mechanical Engineers, pp.894-897, 2004.
  7. D. Lee Chabala, Robert E. Sheridan, "A Microscope Stage Temperature Controller for the Study of Whole-cell or Single-channel Currents," Pflugers Archiv European Journal of Physiology, vol.404, no.4, pp.374-377, 1985. https://doi.org/10.1007/BF00585351
  8. Wei Chen, Jinyan Li, "Progress of Photonic Crystal Fibers and Their Applications," Frontiers of Optoelectronics, vol.2, no.1, pp.50-57, 2009. https://doi.org/10.1007/s12200-009-0002-3
  9. RongJin Yu, Bing Zhang, "A New Generation of Plastic Optical Fibers and its Functional Exploiting," Technological Science, vol.51, no.12, pp.2207-2217, 2008. https://doi.org/10.1007/s11431-008-0242-2
  10. N. Rowe, M. Zyda, "Solving Global Two-dimensional Routing Problems Using Snell's Law and a Search," Robotics and Automation, vol.4, pp.1631-1636, 1987.