DOI QR코드

DOI QR Code

Design Point Operating Characteristics of an Oxidizer Rich Preburner

산화제 과잉 예연소기 설계점 운영 특성

  • Moon, Ilyoon (Advanced Rocket Research Team, Korea Aerospace Research Institute) ;
  • Moon, Insang (Advanced Rocket Research Team, Korea Aerospace Research Institute) ;
  • Kang, Sang Hun (Advanced Rocket Research Team, Korea Aerospace Research Institute) ;
  • Ha, Seong-Up (Advanced Rocket Research Team, Korea Aerospace Research Institute) ;
  • Lee, Soo Young (Advanced Rocket Research Team, Korea Aerospace Research Institute)
  • Received : 2012.12.02
  • Accepted : 2013.07.17
  • Published : 2013.08.01

Abstract

It was designed and tested at the design point that an oxidizer rich preburner for a staged combustion liquid rocket engine propelled by kerosene and LOx. The oxidizer rich preburner was designed as some of LOx injected from the mixing head was burned with kerosene and the rest of LOx injected from injection holes in the regenerative cooling chamber was vaporized by combustion gas. The preburner is operated at OF ratio of 60 and combustion pressure of 20 MPa. The Preburner has a honey-comb type mixing head with simplex swirl injectors, a turbulence ring improving combustion stability and uniformity of product gas temperature distribution, and a nozzle simulating the duct. With the combustion test results at the design point, the oxidizer rich preburner showed high combustion stability and uniformity of product gas temperature distribution.

케로신과 액체산소를 추진제로 하는 다단연소방식 액체엔진용 산화제 과잉 예연소기를 설계하여 설계점에서 연소시험을 수행하였다. 설계된 산화제 과잉 예연소기는 산화제 일부와 연료를 혼합헤드를 통해 연소실에 공급하여 연소시키고 나머지 산화제를 연소실 재생냉각채널을 거쳐 연소실 중앙의 분사공을 통해 연소실로 주입하여 기화시키는 형태로 최종적으로 연소압 20 MPa, 혼합비 60에서 작동한다. 혼합헤드에는 단일 와류형 분사기를 벌집형태로 배열하였으며 가스 온도 균일성 향상과 연소 안정성 향상을 위한 혼합링과 터빈까지의 배관을 고려한 노즐을 장착하였다. 설계점 연소시험에서 산화제 과잉 예연소기는 높은 연소 안정성과 생성가스의 균일한 온도분포를 보였다.

Keywords

References

  1. Huzel, D.K. and Huang, D.H., "Modern Engineering for Design of Liquid-propellant Rocket Engines," AIAA, 1992.
  2. Parsley, R.C., Zhang, B., "Thermodynamic Power Cycles for Pump-Fed Liquid Rocket Engines," Liquid Rocket Thrust Chambers: Aspects of Modeling, Analysis, and Design, Progress in Astronautics and Aeronautics, Vol. 200, AIAA, Chap. 18, 2004.
  3. Farhangi, S., Jensen, R.J., Hunt, K., Tuegel, L. and Yu, T., "Oxidizer-Rich Preburner Technology for Oxygen/Hydrogen Full Flow Cycle Applications," Progress in Astronautics and Aeronautics, Vol. 200, 2004.
  4. Knuth, W.K. and Crawford, R.C., "Oxygen-Rich Combustion Process Applications and Benefits," Modern Engineering for Design of Liquid-propellant Rocket Engines", AIAA, 1992.
  5. Katorgin, B.I., Chvanov, V.K., Chelkis, F.J., Irina G. Lozino-Lozinskaya, I.G. and Tanner, L.G., "Oxidizer-Rich Staged Combustion Rocket Engines Use and Development in Russia," AIAA Space Programs and Technlogies Coference, 1995.
  6. Ha, S.U., Yoo, J.H., Moon, I.Y. and Moon, I.S., "Development History and Modern Trends of Oxidizer-Rich Prebrner," Proceedings of the 2012 Korean Society of Propulsion Engineers Spring Conference, pp. 461-464, 2012.
  7. Ha, S.U., Lee, S.M., Kang, S.H. and Lee, S.Y., "Numerical Analysis on the Supercritical Combustion in Oxidizer-Rich Preburner with Triplex Injector," Proceedings of the 2012 Korean Society of Propulsion Engineers Fall Conference, pp. 490-493, 2012.
  8. Kim, Y.J., Hong, M.G., Lee, S.Y. and Sohn, C.H., "A Numerical Study on Mixing Characteristics for Recess Length of Swirl Coaxial Injector," Proceedings of the 2011 Korean Society of Propulsion Engineers Fall Conference, pp. 74-77, 2011.
  9. Yi, Y.S., Hong, M.G. and Lee, S.Y., "Study on the Spray Pattern of a Gas-centered Swirl Coaxial Injector with Various Injection Conditions," The 16th Annual Conference on Liquid Atomization and Spray Systems, pp. 64-65, 2012.
  10. Moon, I.Y., Moon, I.S., Yoo, J.H., Jeon, J.H., Lee, S.M., Hong, M.G., Ha, S.U., Kang, S.H. and Lee, S.Y., "Ignition Test of an Oxidizer Rich Preburner," Proceedings of the 2011 Korean Society of Propulsion Engineers Fall Conference, pp. 869-872, 2011.
  11. Moon, I.Y., Moon, I.S. and Lee. S.M., "Study on the Product Gas Temperature Uniformity from a Mixing Head of an Oxidizer Rich Preburner," Proceedings of the 7th National Congress on Fluids Engineering, pp. 455-456, 2012.

Cited by

  1. Development of Ultra-Lean-Burn Preburners for Small Liquid Engines vol.32, pp.4, 2016, https://doi.org/10.2514/1.B35888