DOI QR코드

DOI QR Code

Mechanical Properties of Corn Husk Flour/PP Bio-composites

  • Jagadeesh, Dani. (Department of Mechanical Engineering, Changwon National University) ;
  • Sudhakara, P. (Department of Mechanical Engineering, Changwon National University) ;
  • Lee, D.W. (Department of Mechanical Engineering, Changwon National University) ;
  • Kim, H.S. (Department of Mechanical Engineering, Changwon National University) ;
  • Kim, B.S. (Composites Materials Group, Korea Institute of Materials Science) ;
  • Song, J.I. (Department of Mechanical Engineering, Changwon National University)
  • 투고 : 2013.05.10
  • 심사 : 2013.08.26
  • 발행 : 2013.09.01

초록

The focus in the present work is to study the agro-waste corn husk bio-filler as reinforcement for polypropylene. These materials have been created by extrusion and injection molding. The effect of filler content by 10, 20, 30 and 40 wt. % and mesh sizes of 50~100, 100 and 300 on the mechanical properties was studied. For the un-notched specimens, the results of flexural strength showed a declining trend with increase the filler loading and the results of impact strength showed an increasing trend with increase the mesh size. In contrast, enhanced flexural modulus was observed with increasing filler loading and size.

키워드

참고문헌

  1. Nourbakhsh, A., Ashori, A., and Biores, "Wood Plastic Composites from Agro-waste Materials: Analysis of Mechanical Properties," Bioresource Technology, Vol. 101, 2010, pp. 2525-2528. https://doi.org/10.1016/j.biortech.2009.11.040
  2. Kim, H.S., Yang, H.S., and Kim, H.J., "Biodegradability and Mechanical Properties of Agro-flour-filled Polybutylene Succinate Biocomposites," Journal of Applied Polymer Science, Vol. 97, 2005, pp. 1513-1521. https://doi.org/10.1002/app.21905
  3. Peng, F., Bian, J., Ren, J.L., Peng, P., Xu, F., and Sun, R.-C., "Bioconversion of Sugarcane Biomass into Ethanol : An Overview about Composition, Pretreatment Methods, Detoxification of Hydrolysates, Enzymatic Saccharification, and Ethanol Fermentation," Biomass and Bioenergy, Vol. 39, 2012, pp. 20-32. https://doi.org/10.1016/j.biombioe.2010.08.034
  4. Kim, H.S., and Kim, H.J., "Colorless Polyimide Nanocomposite Films: Thermomechanical Properties, Morphology, and Optical Transparency," Journal of Applied Polymer Science, Vol. 107, 2008, pp. 109-117. https://doi.org/10.1002/app.26173
  5. Gahleitner, M., and Kretzschmar, B., "Morphology and Mechanical Properties of Polypropylene/polyamide 6 Nanocomposites Prepared by a Two-step Melt-compounding Process," Journal of Applied Polymer Science, Vol. 100, 2006, pp. 283-291. https://doi.org/10.1002/app.23102
  6. Najafi, S.K., Hamidinia, E., and Tajvidi, M., "Mechanical Properties of Composites from Sawdust and Recycled Plastics," Journal of Applied Polymer Science, Vol. 100, 2006, pp. 3641-3645. https://doi.org/10.1002/app.23159
  7. Moran, J., Alvarex, V., Petrucci, R., Kenny, J., and Vazquez, A., "Mechanical Properties of Polypropylene Composites Based on Natural Fibers Subjected to Multiple Extrusion Cycles", Journal of Applied Polymer Science, Vol. 103, 2007, pp. 228-237. https://doi.org/10.1002/app.25173
  8. Mutje, P., Vallejos, M.E., Girones, J., and Vilaseca, F., "Effect of Maleated Polypropylene as Coupling Agent for Polypropylene Composites Reinforced with Hemp Strands," Journal of Applied Polymer Science, Vol. 102, 2006, pp. 833-840. https://doi.org/10.1002/app.24315
  9. Leblanc, J.L., Furtado, C.R.G., and Leite, M.C.A.M., "Investigating Polypropylene-Green Coconut Fiber Composites in the Molten and Solid States Through Various Techniques," Journal of Applied Polymer Science, Vol. 102, 2006, pp. 1922-1936. https://doi.org/10.1002/app.24239
  10. Yi, W.W., Fei, Z.X., Guan, W.G., and Feng, C.J., "Preparation and Properties of Polypropylene Filled with Organo-montmorillonite Nanocomposites," Journal of Applied Polymer Science, Vol. 100, 2006, pp. 2875-2880. https://doi.org/10.1002/app.23396
  11. Genevive C. Onuegbu, Isaac Ogbennaya Igwe, "The Effects of Filler Contents and Particle Sizes on the Mechanical and End-Use Properties of Snail Shell Powder Filled Polypropylene," Materials Sciences and Application, Vol. 2, 2011, 811-817
  12. Aithani D, Mohanty, "Injection Molded Novel Green Materials from the Byproduct of Corn-based Ethanol Industry," A Society of Plas Engin Boston, 2005, pp. 6147-6152.
  13. USDA National Agricultural Statistics Service. Available at http://www.nass.usda.gov/data_and_statistics/quick_stats/index.asp#top, accessed 08/04/2007.
  14. Marques, A.P., Reis, R.L., and Hunt, J.A., "The Biocompatibility of Novel Starch-based Polymers and Composites: in vitro Studies," Biomaterials. Vol. 23, 2002, pp. 1471-1478. https://doi.org/10.1016/S0142-9612(01)00272-1
  15. Beery, K.E., Mosier, N.S., Hendrickson, R., Brewer, M.A., Dien, B.S., and Bothast, R.J., "A 19F Nuclear Magnetic Relaxation Study of Micelle Formation in Aqueous Solutions of Heptafluorobutyric Acid and Sodium Pentadecafluorooctanoate," American Chemical Society, Vol. 46, 2000, pp. 212-219.
  16. Mohd, Z., Mohamhed, Y., Mohd, S.S., IsmailL, N., and Riza, W., "Mechanical Properties of Short Random Oil Palm Fibre Reinforced Epoxy composites," Sains Malaysiana, Vol. 39, 2010, pp. 87-92.
  17. Kord, B., world, "Crystallization Behavior of Natural Fiber-Reinforced Plastic Nanocomposite," Science Applied Journal, Vol. 13, 2011, pp. 1329-1332.
  18. Jilken, L., Malhammar, G., and Selden, R., "The Effect of Mineral Fillers on Impact and Tensile Properties of Polypropylene," Polymer Testing, Vol. 10, 1991, pp. 329-344. https://doi.org/10.1016/0142-9418(91)90011-L
  19. Fuad, M.Y.A., Ismail, Z., Ishak, Z.A., and Omar, A.K., "Application of Rice Husk Ash as Fillers in Polypropylene: Effect of Titanate, Zirconate and Silane Coupling Agents," European Polymer Journal, Vol. 31, 1995, pp. 885-893. https://doi.org/10.1016/0014-3057(95)00041-0
  20. Kim, H.S., Yang, H.S., and Kim, H.J., "Biodegradability and Mechanical Properties of Agro-flour-filled Polybutylene Succinate Biocomposites," Journal of Applied Polymer Science, Vol. 97, 2005, pp. 1513-21. https://doi.org/10.1002/app.21905
  21. Yang, H.S., Kim, H.J., Park, H.J., Lee, B.J., and Hwang, T.S., "Water Absorption Behavior and Mechanical Properties of Lignocellulosic Filler-polyolefin Bio-composites," Composite Structure, Vol. 72, 2006, pp. 429-437. https://doi.org/10.1016/j.compstruct.2005.01.013
  22. Kendall, K., "Fracture of Particulate Filled Polymers," British Polymer, Vol. 10, 1977, pp. 35-38.
  23. Raj, R.G., Kokta, B.V., Grolaeu, G., and Daneault, C., "Use of Wood Fibers in Thermoplastics. VII. The Effect of Coupling Agents in Polyethylene-wood Fiber Composites," Journal of Applied Polymer Science, Vol. 37, 1989, pp. 1089-1103. https://doi.org/10.1002/app.1989.070370420
  24. Zhaini, M.J., Fuad, M.Y.A., Ismail, Z., Mansor, M.S., and Mustafah, J., "The Effect of Filler Content and Size on the Mechanical Properties of Polypropylene/oil Palm Wood Flour Composites," Polymer Intl. Vol. 40, 1995, pp. 51-55.
  25. Bigg, D.M., "Mechanical Properties of Particulate Filled Polymers," Polymer Composites, Vol. 8, 1987, pp. 115-122. https://doi.org/10.1002/pc.750080208
  26. Fuad, M.Y.A., Ismail, Z., Ishak, Z.A.M., and Omar, A.K.M., "Effect of Titanate, Zirconate and Silane Coupling Agent," European Polymer Journal, Vol. 31, 1995, pp. 885-892. https://doi.org/10.1016/0014-3057(95)00041-0
  27. Fan, Y., Lou, J., and Shinozaki, D.M., "Microstructure Dependent Properties of Polypropylene-clay Nanocomposites," Journal of Applied Polymer Science, Vol. 103, 2007, pp. 204-210. https://doi.org/10.1002/app.25144
  28. Maiti, S.N., and Singh, K., "Influence of Wood Flour on the Mechanical Properties of Polyethylene," Journal of Applied Polymer Science, Vol. 32, 1985, pp. 4285-4289.

피인용 문헌

  1. Mechanical Characterization of the Natural Fiber Reinforced Polystyrene Composite vol.969, pp.None, 2019, https://doi.org/10.4028/www.scientific.net/msf.969.152
  2. Key advances in development of straw fibre bio-composite boards: An overview vol.7, pp.1, 2020, https://doi.org/10.1088/2053-1591/ab66ec
  3. Effect of maleic anhydride content on physico-mechanical properties of γ-irradiated waste polypropylene/corn husk fibers bio-composites vol.108, pp.2, 2013, https://doi.org/10.1515/ract-2019-3121