References
- Sakai, T., Okada, K., Furuichi, M., Nishikawa, I. and Sugeta, A. : Statistical fatigue properties of SCM435 steel in ultra long-life regime based on JSMS database on fatigue strength of metallic materials. Inter. Jour. of Fatigue 28-11 (2006) 1486-1492 https://doi.org/10.1016/j.ijfatigue.2005.09.018
- Shiozawa, K., Morii, Y., Nishino, S., and Lu, L. : Subsurface crack initiation and propagation mechanism in high strength steel in a very high cycle fatigue regime. Inter. Jour. of Fatigue 28-11 (2006) 1521-1532 https://doi.org/10.1016/j.ijfatigue.2005.08.015
- Sakai, T., Sato, Y., Nagano, Y., Takeda, M. and Oguma, N. : Effect of stress ratio on long life fatigue behavior of high carbon chromium bearing steel under axial loading. Inter. Jour. of Fatigue 28-11 (2006) 1547-1554 https://doi.org/10.1016/j.ijfatigue.2005.04.018
- Marco Boniardi, Fabrizio DErrico, Chiara Tagliabue, : Influence of carburizing and nitriding on failure of gears -A case study, Engineering failure Analysis 13 (2006) 312-33 https://doi.org/10.1016/j.engfailanal.2005.02.021
- S.H. Song, S.H. Lee : A study on stress analysis and fatigue behaviors of carbonitrided Cr-Mo(SCM415) steel, J. of the Korean Soc. of Precision Eng. 15-8 (1998) 135-144 (in Korean)
- Zettl, B., Mayer, H., Ede, C., Stanzl-Tschegg, S. :Very high cycle fatigue of normalized carbon steels. Inter. Jour. of Fatigue 28-11 (2006) 1583-1589 https://doi.org/10.1016/j.ijfatigue.2005.05.016
- Suh, C.M., Kim, J.H. : Fatigue characteristics of bearing steel in very high cycle fatigue, Journal of Mechanical Science and Technology 23 (2009) 420-425 https://doi.org/10.1007/s12206-008-1104-3
- Suh, C.M., Song, G.H., Park, H.D. and Pyoun, Y.S. : A Study on the Mechanical Characteristic of Ultrasonic Cold Forged SKD61. Inter. Journal of Modern Physics B 20(25-27) (2006) 4541-4546. https://doi.org/10.1142/S0217979206041653
- Barsom, J.M. and Rolfe, S.T. : Fracture and Fatigue Control in Structure (1999), Prentice-Hall Inc, 163-192
- Kwak, B.M. and Gil, Y.J. : An Indirect Experimental Method for the Determination of Mechanical Properties of Ion-nitrided Layer and Residual Stress Distribution, Trans. of the Korean Society of Mechanical Engineers(A) 9(2), (1985) 240-249 (in Korean)
- Suh, C.M. and Kitagawa, H. : Fatigue Microcracks in a Low Carbon Steel, Fatigue Fract. Engng. Mater. Struct. 8-2 (1985) 193-203 https://doi.org/10.1111/j.1460-2695.1985.tb01203.x
- Suh, C.M. and Kitagawa, H. : Crack Growth Behaviour of Fatigue Microcracks in Low Carbon Steels, Fatigue Fract. Engng. Mater. Struct. 9-6 (1987) 409-424 https://doi.org/10.1111/j.1460-2695.1987.tb00468.x
- Suh, M.S., Pyoun, Y.S., Suh, C.M. :Variation of fatigue characteristics by UNSM on Ti-6Al-4VComparison of rotating fatigue test and axial load tension-comparison fatigue test- Trans. of the Korean Society of Mechanical Engineers(A), 36-4 (2012) 443-449 (in Korean) https://doi.org/10.3795/KSME-A.2012.36.4.443
- C.M. Suh, M.S. Suh, N.S. Hwang: Growth behaviors of small surface fatigue crack in AISI 304 steel, Fatigue Fract. Engng. Mater. Struct. 35, 1 (2011) 22- 29
- C.M. Suh, M.S. Suh, S.K. Kim: Fracture Mechanics of Surface Fatigue Crack Growth by Ductile Striation Space Measurement in Notched Waspaloy, Fatigue Fract. Engng. Mater. Struct. 35, 1 (2011) 30-36
- Chang-Min Suh and Min-Soo Suh : Variations of Impact Value and Hardness for Roll Shell Steel and S25C under Various Tempering, International Journal of Modern Physics B, 25, 31 (2011) 4245- 4248 https://doi.org/10.1142/S0217979211066684
- Chang-Min Suh, Min-Soo Suh, Hae-Yong Cho : Variation of Impact Values by Heat Treatment Temperature to Prevent Brittle Fracture of Roll Shell Steel, J. of Ocean Engineering and Technology, 25-5 (2011) 33-39 (in Korean) https://doi.org/10.5574/KSOE.2011.25.5.033
- Chang-Min Suh, Min-Soo Suh and Sang-Yeob Oh : Variation of Impact Values by Heat Treatment Temperature to Prevent Brittle Fracture of Roll Shell Steel (II) J. of Ocean Engineering and Technology, 25-5 (2011) 40-46 (in Korean)
- Lawrence H. Van Vlack, Elements of Materials Science & Engineering 6th ed. (1989) Addison-Wesley Pub. Co. Inc, 292-301
- C.S. Kang, C.M. Suh : The effect of carburization on the fatigue of low carbon steel, J. of the Society of Naval Architects of Korea, 10-2 (1973) 9-18 (in Korean)