DOI QR코드

DOI QR Code

Synthesis of Yttria Stabilized Zirconia by Sol-gel Precipitation Using PEG and PVA as Stabilizing Agent

  • Bramhe, Sachin N. (Department of Materials Science and Engineering, Graduate School of Pai Chai University) ;
  • Lee, Young Pil (Department of Materials Science and Engineering, Graduate School of Pai Chai University) ;
  • Nguyen, Tuan Dung (Department of Materials Science and Engineering, Graduate School of Pai Chai University) ;
  • Kim, Taik-Nam (Department of Materials Science and Engineering, Graduate School of Pai Chai University)
  • 투고 : 2013.06.27
  • 심사 : 2013.08.08
  • 발행 : 2013.08.27

초록

There is increasing interest in zirconia as a dental material due to its aesthetics, as well as the exceptionally high fracture toughness and high strength that are on offer when it is alloyed with certain oxides like yttria. In recent years, many solution based chemical synthesis methods have been reported for synthesis of zirconia, of which the sol-gel method is considered to be best. Here, we synthesize zirconia by a sol gel assisted precipitation method using either PEG or PVA as a stabilizing agent. Zirconia sol is first synthesized using the hydrothermal method. We used NaOH as the precipitating agent in this method because it is easy to remove from the final solution. Zirconium and yttrium salts are used as precursors and PEG or PVA are used as stabilizers to separate the metal ions. The resulting amorphous zirconia powder is calcined at $900^{\circ}C$ for 2 h to get crystallized zirconia. XRD analysis confirmed the partially stabilized zirconia synthesis in all the synthesized powders. SEM was taken to check the morphology of the powder synthesized using either PEG or PVA as a stabilizing agent and finally the transparency was calculated. The results confirmed that the powder synthesized with 10 % PVA as the stabilizing agent had highest percentage of transparency among all the synthesized powder.

키워드

참고문헌

  1. Antonio Diaz-Parralejo, Antonio Marias-Garcia, Jose Sanchez-Gonzalez, M. Angeles Diaz-Diez and Eduardo M. Cuerda-Correa, J. Non-Crystalline Solids, 357, 1090 (2011). https://doi.org/10.1016/j.jnoncrysol.2010.10.025
  2. Zijun Zhang, Jiurong Liu, Fenglong Wang, Jing Kong and Xinzhen Wang, Ceram. Int., 37, 2549 (2011). https://doi.org/10.1016/j.ceramint.2011.03.054
  3. J. A. Wang, M. A. Valenzuela, J. Salmones, A. Vazquez, A. Garcia-Ruiz and X. Bokhimi, Catalysis Today, 68, 21 (2001). https://doi.org/10.1016/S0920-5861(01)00319-4
  4. Felora Heshmatpour and Reza Babadi Aghakhanpour, Powder Technol., 205, 193 (2011). https://doi.org/10.1016/j.powtec.2010.09.011
  5. Javier Rivera De la Rosa, Aracely Hernandez, Fernando Rojas, Juan Jose Ledezma, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 315, 147 (2008). https://doi.org/10.1016/j.colsurfa.2007.07.029
  6. Zeming Qi, Chaoshu Shi, Yaguang Wei, Zheng Wang, Tao Liu, Tiandou Hu, Zongyan Zhao and Fuli Li, J. Phys.: Condens. Matter, 13, 11503 (2001). https://doi.org/10.1088/0953-8984/13/50/309
  7. Weimin Liu, Yunxia Chen, Chengfeng Ye, Pingyu Zhang Ceram. Int.l 28, 349 (2002)
  8. X. Bokhimi, A. Morales, A. Garcia-Ruiz, T. D. Xiao, H. Chen and P. R. Strutt, J. Solid State Chemistry, 142, 409 (1999). https://doi.org/10.1006/jssc.1998.8056
  9. Oleg Vasylvik and Yoshio Sakka, J. Am. Ceram. Soc., 84, 2489 (2001). https://doi.org/10.1111/j.1151-2916.2001.tb01041.x
  10. S. Salehi and M. H. Fathi, Ceram. Int., 36, 1659 (2010). https://doi.org/10.1016/j.ceramint.2010.02.045
  11. R. Ramamoorthy, D. Sundararaman and S. Ramasamy, Solid State Ionics, 123, 271 (1999). https://doi.org/10.1016/S0167-2738(99)00103-4
  12. Qibing Chang, Jian-er Zhou, Yongqing Wang and Guangyao Meng, Advanced Powder Technology, 21, 425 (2010). https://doi.org/10.1016/j.apt.2009.11.003
  13. Sang Jin Lee, Hyun-Kwuon Lee and Kyeong-Sik Cho J. Ceram. Processing Research, 6, 85 (2005).