DOI QR코드

DOI QR Code

초정밀 데스크탑 마이크로 NC 선반 개발 및 성능평가

Development and Evaluation of Ultra-precision Desktop NC Turning Machine

  • 투고 : 2013.07.15
  • 심사 : 2013.08.08
  • 발행 : 2013.08.15

초록

This study introduces a recently designed desktop-sized NC turning system and its components. This machine is designed for the ultra-precise turning of parts with a diameter of 0.5-20 mm with minimum space usage for the machine. This study aims to achieve submicron-level accuracy of movements and good rigidity of the machine for precision machining using the desktop-sized machine. The components such as the main machine structure, air bearing servo spindle, and XZ stage with needle roller guides are designed, and the designed machine is built with a PC-based CNC controller. Its static and dynamic stiffness performances and positioning resolutions are tested. Through machining tests with single-crystal diamond tools, a form error less than $0.8{\mu}m$ and surface roughness (Ra) of $0.03{\mu}m$ for workpieces are obtained.

키워드

참고문헌

  1. Okazaki, Y., Mishima, N., Ashida, K., 2004, Microfactoryconcept, History, and Developments, Journal of manufacturing science and engineering, 126:4 837-844. https://doi.org/10.1115/1.1823491
  2. Volger, M. P., Liu, X., Kapoor, S. G., DeVor, R. E., Ehmann, K. F., 2002, Development of Meso-scale Machine Tool (mMT) Systems, Trans. NAMRI/SME, 30: 653-661.
  3. Ro, S. K., Jang, S. K., Kim, B. S., 2008, Development of a Miniature Vertical Milling Machine for Automation Used in a Microfactory, Proc. ICSMA, 186-189.
  4. Ro, S. K, Park, J. K., 2008, Development of a Miniature Airbearing Stage with a Moving-magnet Linear Motor, International journal of precision engineering and manufacturing, 9:1 19-24.
  5. Ro, S. K., Jang, S. K., Park, J. K., 2009, Development of a Miniature Air Bearing Stage and Its Application to a Meso Scale Machine Tool, Proc. ASME-MSEC, 72380.
  6. Lu, Z., Yonejama, T., 1999, Micro Cutting in the Micro Lathe Turning System, International journal of machine tools & manufacture, 39:7 1171-1183. https://doi.org/10.1016/S0890-6955(98)00092-3
  7. Azizur Rahman M., Rahman, M., Senthil, Kumar, A., 2005, CNC Microturning: An Application to Miniaturization, nternational journal of machine tools & manufacture, 45:6 631-639. https://doi.org/10.1016/j.ijmachtools.2004.10.003
  8. Smith, S. T., Seugling, R. M., 2006 ,Sensor and Actuator Considerations for Precision Small Machines, Precision engineering, 30:3 245-264. https://doi.org/10.1016/j.precisioneng.2005.10.003
  9. Lee, D. J., Shin, W. C., Park, H. W., Ro, S. K., Park,J. K., Chung, J. M., 2008, Design of Tool Clamping Device Based on a Shape Memory Alloy, Trans. KSMTE, 17:5 70-75.
  10. Ro, S. K., Park, J. K., Yoon, H. S., Ehmann, K. F., 2005, Static and Dynamic Characteristics of Magnetically Preloaded Stages for a 3-Axis Micro-Machine Tool, Proc. KSMTE Spring Conference, 468-472.
  11. McGeough, J., 2002, Micromachining of Engineering Materials, Marcel Dekker, New York.

피인용 문헌

  1. Development of Automatic Tool Changer of SMA Tool Holder vol.25, pp.1, 2016, https://doi.org/10.7735/ksmte.2016.25.1.1