Journal of the Optical Society of Korea

  • 제17권4호
  • /
  • Pages.300-304
  • /
  • 2013
  • /
  • 1226-4776(pISSN)
  • /
  • 2093-6885(eISSN)
한국광학회 (Optical Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

Discernibly Temperature-insensitive Pressure Sensitivity in Porous Random-Hole Optical Fibers

  • Kim, Jeong (Department of Electric, Electronic and Communication Engineering Education, Chungnam National University) ;
  • Kominsky, Dan (Prime Photonics) ;
  • Pickrell, Gary (NanoBioMaterials Laboratory and Center for Photonics Technology, Virginia Tech)
  • 투고 : 2013.05.08
  • 심사 : 2013.07.17
  • 발행 : 2013.08.25
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Novel breakthrough random-hole optical fibers (RHOFs) are fabricated in a draw tower facility, by tapering an optical fiber preform packed with a silica powder mixture capable of producing air holes in situ at the high temperature of tens of hundreds in degrees Celsius. Structural and propagation characteristics of the porous RHOF are explained briefly. Experimental investigations of the invented RHOF are performed for pressure sensor applications. Remarkable results are obtained for the RHOF with desirable pressure sensitivity independent of temperature, as is required for harsh conditions as in oil reservoirs.

키워드

참고문헌

  1. W. N. MacPherson, M. J. Gander, R. McBride, J. D. C. Jones, P. M. Blanchard, J. G. Burnett, A. H. Greenaway, B. Mangan, T. A. Birks, J. C. Knight, and P. St. J. Russell, "Remotely addressed optical fibre curvature sensor using multicore photonic crystal fibre," Opt. Commun. 193, 97-104 (2001). https://doi.org/10.1016/S0030-4018(01)01260-3
  2. M. Digonnet, S. Blin, H. K. Kim, V. Dangui, and G. Kino, "Sensitivity and stability of an air-core fibre-optic gyroscope," Meas. Sci. Technol. 18, 3089-3097 (2007). https://doi.org/10.1088/0957-0233/18/10/S07
  3. I.-B. Kwon, C.-Y. Kim, S.-B. Cho, and J.-J. Lee, "Temperature compensation of a strain sensing signal from a fiber optic Brillouin optical time domain analysis sensor," J. Opt. Soc. Korea 7, 106-112 (2003). https://doi.org/10.3807/JOSK.2003.7.2.106
  4. G. Pickrell, D. Kominsky, R. Stolen, F. Ellis, J. Kim, A. Safaai-Jazi, and A. Wang, "Microstructural analysis of random hole optical fibers," IEEE Photon. Technol. Lett. 16, 491-493 (2004). https://doi.org/10.1109/LPT.2003.819403
  5. H. Y. Fu, H. Y. Tam, L.-Y. Shao, X. Dong, P. K. A. Wai, C. Lu, and S. K. Khijwania, "Pressure sensor realized with polarization-maintaining photonic crystal fiber-based Sagnac interferometer," Appl. Opt. 47, 2835-2839 (2008). https://doi.org/10.1364/AO.47.002835
  6. M. Mehregany, C. A. Zorman, N. Rajan, and C. H. Wu, "Silicon carbide MEMS for harsh environments," Proc. IEEE 86, 1594-1610 (1998). https://doi.org/10.1109/5.704265
  7. http://www.mhi.co.jp/en/news/story/1105261435.html.
  8. J. Kim, "Design of nonlinear photonic crystal fibers with a double-cladded coaxial core for zero chromatic dispersion," Appl. Opt. 51, 6896-6900 (2012). https://doi.org/10.1364/AO.51.006896
  9. M. Danaie and H. Kaatuzian, "Bandwidth improvement for a photonic crystal optical Y-splitter," J. Opt. Soc. Korea 15, 283-288 (2011). https://doi.org/10.3807/JOSK.2011.15.3.283
  10. W.-S. Choi, "Analysis of temperature dependence of thermally induced transient effect in interferometric fiber-optic gyroscopes," J. Opt. Soc. Korea 15, 237-243 (2011). https://doi.org/10.3807/JOSK.2011.15.3.237
  11. G.-S. Chung, K.-C. Lee, and J.-H. Lee, "Fabrication and characteristics of a micromachined ceramic pressure sensor based on tantalum-nitride thin-film strain gauges," J. Korean Phys. Soc. 49, 1379-1383 (2006).
  12. J. Joung, K.-C. Kim, K. Kim, and J. Park, "Miniature fiber optic Fabry-Perot pressure sensor," J. Korean Phys. Soc. 51, 249-251 (2007). https://doi.org/10.3938/jkps.51.249
  13. W. Wang, N. Wu, Y. Tian, C. Niezrecki, and X. Wang, "Ultra-miniature fiber-optic pressure sensor using white light interferometry," Opt. Express 18, 9006-9014 (2010). https://doi.org/10.1364/OE.18.009006
  14. K. Totsu, Y. Haga, and M. Esashi, "A pressure applied low-level laser probe to enhance laser photon density in soft tissue," J. Micromech. Microeng. 15, 71-75 (2005). https://doi.org/10.1088/0960-1317/15/1/011
  15. J. M. Lopez-Higuera, Handbook of Optical Fibre Sensing Technology (Wiley, New York, USA, 2002).

피인용 문헌

  1. Theoretical analysis of novel fiber grating pair vol.23, pp.3, 2016, https://doi.org/10.1007/s10043-016-0210-1
  2. Directional Radiation of Surface Plasmon Polaritons at Visible Wavelengths through a Nanohole Dimer Optical Antenna Milled in a Gold Film vol.18, pp.6, 2014, https://doi.org/10.3807/JOSK.2014.18.6.799
  3. Compact Biocompatible Fiber Optic Temperature Microprobe Using DNA-Based Biopolymer vol.36, pp.4, 2018, https://doi.org/10.1109/JLT.2017.2780266